On Mon, Feb 28, 2011 at 3:18 PM, Keerthy <j-keerthy@xxxxxx> wrote:
> +static int twl4030_madc_read_channels(struct twl4030_madc_data *madc,
> + u8 reg_base, unsigned
> + long channels, int *buf)
> +{
> + int count = 0, count_req = 0, i;
> + u8 reg;
> +
> + for_each_set_bit(i, &channels, TWL4030_MADC_MAX_CHANNELS) {
> + reg = reg_base + 2 * i;
> + buf[i] = twl4030_madc_channel_raw_read(madc, reg);
> + if (buf[i] < 0) {
> + dev_err(madc->dev,
> + "Unable to read register 0x%X\n", reg);
> + count_req++;
> + continue;
> + }
> + switch (i) {
> + case 10:
> + buf[i] =
> + twl4030battery_current(buf[i]);
Possibly fix these breaks in statements where applicable.
> + if (buf[i] < 0) {
> + dev_err(madc->dev,
> + "error reading current");
> + count_req++;
> + } else {
> + count++;
> + buf[i] = buf[i] - 750;
> + }
> + break;
> + case 1:
> + buf[i] =
> + twl4030battery_temperature(buf[i]);
> + if (buf[i] < 0) {
> + dev_err(madc->dev,
> + "error reading temperature");
> + count_req++;
> + } else {
> + count++;
> + }
> + break;
> + default:
> + count++;
> + /* Analog Input (V) = conv_result *
> + * step_size / R
> + * conv_result = decimal value
> + * of 10-bit conversion
> + * result
> + * step size = 1.5 / (2 ^ 10 -1)
> + * R = Prescaler ratio for input
> + * channels
> + * Result given in mV hence multiplied
> + * by 1000
> + */
> + buf[i] = (buf[i] * 3 * 1000 *
> + twl4030_divider_ratios[i].denominator)
> + / (2 * 1023 *
> + twl4030_divider_ratios[i].numerator);
> + }
> + }
> + if (count_req)
> + dev_dbg(madc->dev, "%d channel conversion failed\n", count_req);
> +
> + return count;
> +}
> +
ÿôèº{.nÇ+?·?®??+%?Ëÿ±éݶ¥?wÿº{.nÇ+?·¥?{±þ??§ø§¶?¡Ü¨}©?²Æ zÚ&j:+v?¨þø ¯ù ®w¥þ?à2?Þ?¨èÚ&¢)ß¡«a¶Úÿÿûàz¿äz¹Þ?ú+?ù???Ý¢jÿ?wèþf
