Kishore,
On Wed, Feb 23, 2011 at 23:17, Kishore Kadiyala <kishore.kadiyala@xxxxxx> wrote:
> Add a device attribute to hwmod data of omap2430, omap3, omap4.
> Currently the device attribute holds information regarding dual volt MMC card
> support by the controller which will be later passed to the host driver via
> platform data.
>
> Signed-off-by: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@xxxxxx>
> Cc: Benoit Cousson <b-cousson@xxxxxx>
> Cc: Paul Walmsley <paul@xxxxxxxxx>
> ---
> arch/arm/mach-omap2/omap_hwmod_2430_data.c | 9 +++++++++
> arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 12 ++++++++++++
> arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 16 ++++++++++++++++
> arch/arm/plat-omap/include/plat/mmc.h | 10 ++++++++++
> drivers/mmc/host/omap_hsmmc.c | 4 ++--
> 5 files changed, 49 insertions(+), 2 deletions(-)
>
<<snip>>
>
> diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
> index e5de5d4..7853130 100644
> --- a/arch/arm/plat-omap/include/plat/mmc.h
> +++ b/arch/arm/plat-omap/include/plat/mmc.h
> @@ -43,6 +43,13 @@
>
> #define OMAP_MMC_MAX_SLOTS 2
>
> +/* omap_hwmod integration data */
What is omap_hwmod integration data ? Pls clarify.
> +#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(1)
> +
> +struct mmc_dev_attr {
> + u8 flags;
> +};
> +
> struct omap_mmc_platform_data {
> /* back-link to device */
> struct device *dev;
> @@ -71,6 +78,9 @@ struct omap_mmc_platform_data {
>
> u64 dma_mask;
>
> + /* Integrating attributes from the omap_hwmod layer */
> + u8 controller_dev_attr;
> +
> /* Register offset deviation */
> u16 reg_offset;
>
> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> index 078fdf1..160cc95 100644
> --- a/drivers/mmc/host/omap_hsmmc.c
> +++ b/drivers/mmc/host/omap_hsmmc.c
> @@ -1555,7 +1555,7 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> break;
> }
>
> - if (host->id == OMAP_MMC1_DEVID) {
> + if (host->pdata->controller_dev_attr & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) {
Where is pdata->controller_dev_attr getting populated? I don't see the
dev_attr from the
hwmod database used anywhere in this patch.
> /* Only MMC1 can interface at 3V without some flavor
> * of external transceiver; but they all handle 1.8V.
> */
> @@ -1647,7 +1647,7 @@ static void omap_hsmmc_conf_bus_power(struct omap_hsmmc_host *host)
> u32 hctl, capa, value;
>
> /* Only MMC1 supports 3.0V */
> - if (host->id == OMAP_MMC1_DEVID) {
> + if (host->pdata->controller_dev_attr & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) {
Ditto.
> hctl = SDVS30;
> capa = VS30 | VS18;
> } else {
> --
> 1.7.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
