Russell King - ARM Linux wrote: > > Kukjin, could you test this update as well please? > No problem :) It works fine with following. Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. > Thanks. > > On Tue, Feb 15, 2011 at 11:04:53AM +0000, Russell King - ARM Linux wrote: > > On Fri, Feb 11, 2011 at 06:50:57PM -0800, Colin Cross wrote: > > > > +ENDPROC(cpu_resume_turn_mmu_on) > > > > +cpu_resume_after_mmu: > > > > + str r5, [r2, r4, lsl #2] @ restore old mapping > > > > +#ifdef MULTI_CACHE > > > > + ldr r10, =cpu_cache > > > > + ldr pc, [r10, #CACHE_FLUSH_KERN_ALL] > > > > +#else > > > > + b __cpuc_flush_kern_all > > > > +#endif > > > > I think we can eliminate this cache flush by delaying the cache enable > > as below. Could you see whether Tegra 2 survives this please? > > Thanks. > > > > diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S > > index bed1876..193be5f 100644 > > --- a/arch/arm/kernel/sleep.S > > +++ b/arch/arm/kernel/sleep.S > > @@ -4,6 +4,7 @@ > > #include <asm/assembler.h> > > #include <asm/glue-cache.h> > > #include <asm/glue-proc.h> > > +#include <asm/system.h> > > .text > > > > /* > > @@ -81,25 +82,22 @@ ENTRY(cpu_resume_mmu) > > str r3, [r2, r4, lsl #2] @ setup 1:1 mapping for mmu code > > sub r2, r2, r1 > > ldr r3, =cpu_resume_after_mmu > > + bic r1, r0, #CR_C @ ensure D-cache is disabled > > b cpu_resume_turn_mmu_on > > ENDPROC(cpu_resume_mmu) > > .ltorg > > .align 5 > > cpu_resume_turn_mmu_on: > > - mcr p15, 0, r0, c1, c0, 0 @ turn on MMU, caches, etc > > - mrc p15, 0, r0, c0, c0, 0 @ read id reg > > - mov r0, r0 > > - mov r0, r0 > > + mcr p15, 0, r1, c1, c0, 0 @ turn on MMU, I-cache, etc > > + mrc p15, 0, r1, c0, c0, 0 @ read id reg > > + mov r1, r1 > > + mov r1, r1 > > mov pc, r3 @ jump to virtual address > > ENDPROC(cpu_resume_turn_mmu_on) > > cpu_resume_after_mmu: > > str r5, [r2, r4, lsl #2] @ restore old mapping > > -#ifdef MULTI_CACHE > > - ldr r10, =cpu_cache > > - ldr pc, [r10, #CACHE_FLUSH_KERN_ALL] > > -#else > > - b __cpuc_flush_kern_all > > -#endif > > + mcr p15, 0, r0, c1, c0, 0 @ turn on D-cache > > + mov pc, lr > > > > /* > > * Note: Yes, part of the following code is located into the .data section. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
