There is a linker error from lcd_2430sdp.c if CONFIG_TWL4030_CORE is not set. This can be triggered on OMAP2 builds where OMAP3 or OMAP4 are not set. drivers/built-in.o: In function `sdp2430_panel_disable': drivers/video/omap/lcd_2430sdp.c:123: undefined reference to `twl_i2c_write_u8' drivers/video/omap/lcd_2430sdp.c:124: undefined reference to `twl_i2c_write_u8' drivers/built-in.o: In function `sdp2430_panel_enable': drivers/video/omap/lcd_2430sdp.c:110: undefined reference to `twl_i2c_write_u8' drivers/video/omap/lcd_2430sdp.c:112: undefined reference to `twl_i2c_write_u8' Fix this by adding TWL4030_CORE dependency to CONFIG_MACH_OMAP_2430SDP as there is no own entry in drivers/video/omap/Kconfig. Signed-off-by: Jarkko Nikula <jhnikula@xxxxxxxxx> Cc: Tomi Valkeinen <tomi.valkeinen@xxxxxx> --- Quite old issue most probably. Can be triggered in mainline anyway. --- arch/arm/mach-omap2/Kconfig | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b9d8a7b..bfdf240 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -132,6 +132,7 @@ config MACH_OMAP_2430SDP depends on SOC_OMAP2430 default y select OMAP_PACKAGE_ZAC + select TWL4030_CORE config MACH_OMAP3_BEAGLE bool "OMAP3 BEAGLE board" -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
