This patch adds a generic panel entry for the 4.3 inch display that is sold with the devkit8000 and modifies the board file to use this display. Signed-off-by: Daniel Morsing <daniel.morsing@xxxxxxxxx> --- Note that this patch depends on the previous one in the series. arch/arm/mach-omap2/board-devkit8000.c | 2 +- drivers/video/omap2/displays/panel-generic-dpi.c | 26 ++++++++++++++++++++++ 2 files changed, 27 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 9a2a31e..6dab13e 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -148,7 +148,7 @@ static struct regulator_consumer_supply devkit8000_vio_supply = REGULATOR_SUPPLY("vcc", "spi2.0"); static struct panel_generic_dpi_data lcd_panel = { - .name = "generic", + .name = "devkit_43", .platform_enable = devkit8000_panel_enable_lcd, .platform_disable = devkit8000_panel_disable_lcd, }; diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c index b52a28f..ee9e7ea 100644 --- a/drivers/video/omap2/displays/panel-generic-dpi.c +++ b/drivers/video/omap2/displays/panel-generic-dpi.c @@ -83,6 +83,32 @@ static struct panel_config generic_dpi_panels[] = { .name = "generic", }, + /* Devkit8000 4.3 Inch display */ + { + { + .x_res = 480, + .y_res = 272, + + .pixel_clock = 10000, + + .hfp = 2, + .hsw = 41, + .hbp = 2, + + .vfp = 2, + .vsw = 10, + .vbp = 2, + }, + .acbi = 0x0, + .acb = 0x0, + .recommended_bpp = 16, + .config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | + OMAP_DSS_LCD_IHS, + .power_on_delay = 50, + .power_off_delay = 100, + .name = "devkit_43", + }, + /* Sharp LQ043T1DG01 */ { { -- 1.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html