Hi Paul,
On Wed, Feb 9, 2011 at 4:59 AM, Paul Walmsley <paul@xxxxxxxxx> wrote:
> On Wed, 2 Feb 2011, Kishore Kadiyala wrote:
>
>> Update the omap2420 hwmod data with the HSMMC info.
>
> Umm, this doesn't look right. OMAP2420 doesn't have an HSMMC block as far
> as I know. It also uses a different driver than later OMAPs.
OK , I will update this in V3.
>
> More comments below.
>
>> Add a device attribute structure which will be used
>> by the host driver to find whether the HSMMC controller
>> supports DUAL VOLT cards.
>>
>> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@xxxxxx>
>> ---
>> arch/arm/mach-omap2/omap_hwmod_2420_data.c | 88 ++++++++++++++++++++++++++++
>> arch/arm/plat-omap/include/plat/mmc.h | 7 ++
>> 2 files changed, 95 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
>> index b85c630..1fbb618 100644
>> --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
>> +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
>> @@ -18,6 +18,7 @@
>> #include <plat/serial.h>
>> #include <plat/i2c.h>
>> #include <plat/gpio.h>
>> +#include <plat/mmc.h>
>>
>> #include "omap_hwmod_common_data.h"
>>
>> @@ -44,6 +45,7 @@ static struct omap_hwmod omap2420_gpio2_hwmod;
>> static struct omap_hwmod omap2420_gpio3_hwmod;
>> static struct omap_hwmod omap2420_gpio4_hwmod;
>> static struct omap_hwmod omap2420_dma_system_hwmod;
>> +static struct omap_hwmod omap2420_mmc1_hwmod;
>>
>> /* L3 -> L4_CORE interface */
>> static struct omap_hwmod_ocp_if omap2420_l3_main__l4_core = {
>> @@ -95,6 +97,24 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
>> .user = OCP_USER_MPU | OCP_USER_SDMA,
>> };
>>
>> +/* L4 CORE -> MMC1 interface */
>> +static struct omap_hwmod_addr_space omap2420_mmc1_addr_space[] = {
>> + {
>> + .pa_start = 0x4809c000,
>> + .pa_end = 0x4809c07f,
>> + .flags = ADDR_TYPE_RT,
>> + },
>> +};
>> +
>> +static struct omap_hwmod_ocp_if omap2420_l4_core__mmc1 = {
>> + .master = &omap2420_l4_core_hwmod,
>> + .slave = &omap2420_mmc1_hwmod,
>> + .clk = "mmchs1_ick",
>
> This clock doesn't exist in the OMAP2420 clock tree.
Corrected in V2
https://patchwork.kernel.org/patch/541911/
>
>> + .addr = omap2420_mmc1_addr_space,
>> + .addr_cnt = ARRAY_SIZE(omap2420_mmc1_addr_space),
>> + .user = OCP_USER_MPU | OCP_USER_SDMA,
>> +};
>> +
>> /* L4 CORE -> UART1 interface */
>> static struct omap_hwmod_addr_space omap2420_uart1_addr_space[] = {
>> {
>> @@ -196,6 +216,7 @@ static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = {
>> /* Master interfaces on the L4_CORE interconnect */
>> static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = {
>> &omap2420_l4_core__l4_wkup,
>> + &omap2420_l4_core__mmc1,
>> &omap2_l4_core__uart1,
>> &omap2_l4_core__uart2,
>> &omap2_l4_core__uart3,
>> @@ -864,6 +885,72 @@ static struct omap_hwmod omap2420_dma_system_hwmod = {
>> .flags = HWMOD_NO_IDLEST,
>> };
>>
>> +/* MMC/SD/SDIO common */
>> +
>> +static struct omap_hwmod_class_sysconfig mmc_sysc = {
>> + .rev_offs = 0x3c,
>> + .sysc_offs = 0x64,
>> + .syss_offs = 0x68,
>> + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
>> + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
>> + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
>> + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
>> + .sysc_fields = &omap_hwmod_sysc_type1,
>> +};
>> +
>> +static struct omap_hwmod_class mmc_class = {
>> + .name = "mmc",
>> + .sysc = &mmc_sysc,
>> +};
>> +
>> +/* MMC/SD/SDIO1 */
>> +
>> +static struct mmc_dev_attr mmc1_dev_attr = {
>> + .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
>> +};
>> +
>> +static struct omap_hwmod_irq_info mmc1_mpu_irqs[] = {
>> + { .irq = 83 },
>> +};
>> +
>> +static struct omap_hwmod_dma_info mmc1_sdma_reqs[] = {
>> + { .name = "tx", .dma_req = 61 }, /* DMA_MMC1_TX */
>> + { .name = "rx", .dma_req = 62 }, /* DMA_MMC1_RX */
>> +};
>> +
>> +static struct omap_hwmod_opt_clk mmc1_opt_clks[] = {
>> + { .role = "dbck", .clk = "mmchsdb_fck" },
>
> Also does not exist on OMAP2420.
Corrected in V2
https://patchwork.kernel.org/patch/541911/
>
>> +};
>> +
>> +static struct omap_hwmod_ocp_if *omap2420_mmc1_slaves[] = {
>> + &omap2420_l4_core__mmc1,
>> +};
>> +
>> +static struct omap_hwmod omap2420_mmc1_hwmod = {
>> + .name = "mmc1_hwmod",
>> + .mpu_irqs = mmc1_mpu_irqs,
>> + .mpu_irqs_cnt = ARRAY_SIZE(mmc1_mpu_irqs),
>> + .sdma_reqs = mmc1_sdma_reqs,
>> + .sdma_reqs_cnt = ARRAY_SIZE(mmc1_sdma_reqs),
>> + .opt_clks = mmc1_opt_clks,
>> + .opt_clks_cnt = ARRAY_SIZE(mmc1_opt_clks),
>> + .main_clk = "mmchs1_fck",
>> + .prcm = {
>> + .omap2 = {
>> + .module_offs = CORE_MOD,
>> + .prcm_reg_id = 1,
>> + .module_bit = OMAP2420_EN_MMC_SHIFT,
>> + .idlest_reg_id = 1,
>> + .idlest_idle_bit = OMAP2420_ST_MMC_SHIFT,
>> + },
>> + },
>> + .slaves = omap2420_mmc1_slaves,
>> + .slaves_cnt = ARRAY_SIZE(omap2420_mmc1_slaves),
>> + .class = &mmc_class,
>> + .dev_attr = &mmc1_dev_attr,
>> + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
>> +};
>> +
>> static __initdata struct omap_hwmod *omap2420_hwmods[] = {
>> &omap2420_l3_main_hwmod,
>> &omap2420_l4_core_hwmod,
>> @@ -871,6 +958,7 @@ static __initdata struct omap_hwmod *omap2420_hwmods[] = {
>> &omap2420_mpu_hwmod,
>> &omap2420_iva_hwmod,
>> &omap2420_wd_timer2_hwmod,
>> + &omap2420_mmc1_hwmod,
>> &omap2420_uart1_hwmod,
>> &omap2420_uart2_hwmod,
>> &omap2420_uart3_hwmod,
>> diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
>> index f57f36a..7821344 100644
>> --- a/arch/arm/plat-omap/include/plat/mmc.h
>> +++ b/arch/arm/plat-omap/include/plat/mmc.h
>> @@ -43,6 +43,13 @@
>>
>> #define OMAP_MMC_MAX_SLOTS 2
>>
>> +/* omap_hwmod integration data */
>> +#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(1)
>
> Since it's not using the HSMMC driver, this is not going to do anything.
Agree , Need to remove this
<snip>
Regards,
Kishore
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
