Kevin, >-----Original Message----- >From: Kevin Hilman [mailto:khilman@xxxxxx] >Sent: Wednesday, February 09, 2011 5:38 AM >To: Hema HK >Cc: linux-usb@xxxxxxxxxxxxxxx; linux-omap@xxxxxxxxxxxxxxx; >Felipe Balbi; Tony Lindgren; Cousson, Benoit; Paul Walmsley >Subject: Re: [PATCH 5/5 v5] usb: musb: Using runtime pm APIs for musb. > >On Fri, 2010-12-10 at 20:05 +0530, Hema HK wrote: >> Calling runtime pm APIs pm_runtime_put_sync() and >pm_runtime_get_sync() >> for enabling/disabling the clocks, sysconfig settings. >> >> enable clock, configure no-idle/standby when active and >configure force idle/standby >> and disable clock when idled. This is taken care by the >runtime framework when >> driver calls the pm_runtime_get_sync and pm_runtime_put_sync APIs. >> Need to configure MUSB into force standby and force idle >mode when usb not used >> >> Signed-off-by: Hema HK <hemahk@xxxxxx> >> Cc: Felipe Balbi <balbi@xxxxxx> >> Cc: Tony Lindgren <tony@xxxxxxxxxxx> >> Cc: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> >> Cc: Cousson, Benoit <b-cousson@xxxxxx> >> Cc: Paul Walmsley <paul@xxxxxxxxx> >> --- >> >> drivers/usb/musb/musb_core.h | 2 - >> drivers/usb/musb/omap2430.c | 80 >+++++++++++-------------------------------- >> 2 files changed, 23 insertions(+), 59 deletions(-) >> >> Index: usb/drivers/usb/musb/omap2430.c >> =================================================================== >> --- usb.orig/drivers/usb/musb/omap2430.c >> +++ usb/drivers/usb/musb/omap2430.c >> @@ -33,6 +33,8 @@ >> #include <linux/io.h> >> #include <linux/platform_device.h> >> #include <linux/dma-mapping.h> >> +#include <linux/pm_runtime.h> >> +#include <linux/err.h> >> >> #include "musb_core.h" >> #include "omap2430.h" >> @@ -40,7 +42,6 @@ >> struct omap2430_glue { >> struct device *dev; >> struct platform_device *musb; >> - struct clk *clk; >> }; >> #define glue_to_musb(g) platform_get_drvdata(g->musb) >> >> @@ -216,20 +217,12 @@ static inline void omap2430_low_level_ex >> l = musb_readl(musb->mregs, OTG_FORCESTDBY); >> l |= ENABLEFORCE; /* enable MSTANDBY */ >> musb_writel(musb->mregs, OTG_FORCESTDBY, l); >> - >> - l = musb_readl(musb->mregs, OTG_SYSCONFIG); >> - l |= ENABLEWAKEUP; /* enable wakeup */ >> - musb_writel(musb->mregs, OTG_SYSCONFIG, l); >> } >> >> static inline void omap2430_low_level_init(struct musb *musb) >> { >> u32 l; >> >> - l = musb_readl(musb->mregs, OTG_SYSCONFIG); >> - l &= ~ENABLEWAKEUP; /* disable wakeup */ >> - musb_writel(musb->mregs, OTG_SYSCONFIG, l); >> - >> l = musb_readl(musb->mregs, OTG_FORCESTDBY); >> l &= ~ENABLEFORCE; /* disable MSTANDBY */ >> musb_writel(musb->mregs, OTG_FORCESTDBY, l); >> @@ -307,21 +300,6 @@ static int omap2430_musb_init(struct mus >> >> omap2430_low_level_init(musb); >> >> - l = musb_readl(musb->mregs, OTG_SYSCONFIG); >> - l &= ~ENABLEWAKEUP; /* disable wakeup */ >> - l &= ~NOSTDBY; /* remove possible nostdby */ >> - l |= SMARTSTDBY; /* enable smart standby */ >> - l &= ~AUTOIDLE; /* disable auto idle */ >> - l &= ~NOIDLE; /* remove possible noidle */ >> - l |= SMARTIDLE; /* enable smart idle */ >> - /* >> - * MUSB AUTOIDLE don't work in 3430. >> - * Workaround by Richard Woodruff/TI >> - */ >> - if (!cpu_is_omap3430()) >> - l |= AUTOIDLE; /* enable auto idle */ >> - musb_writel(musb->mregs, OTG_SYSCONFIG, l); >> - >> l = musb_readl(musb->mregs, OTG_INTERFSEL); >> >> if (data->interface_type == MUSB_INTERFACE_UTMI) { >> @@ -384,7 +362,7 @@ static int __init omap2430_probe(struct >> struct musb_hdrc_platform_data *pdata = >pdev->dev.platform_data; >> struct platform_device *musb; >> struct omap2430_glue *glue; >> - struct clk *clk; >> + int status = 0; >> >> int ret = -ENOMEM; >> >> @@ -400,26 +378,12 @@ static int __init omap2430_probe(struct >> goto err1; >> } >> >> - clk = clk_get(&pdev->dev, "ick"); >> - if (IS_ERR(clk)) { >> - dev_err(&pdev->dev, "failed to get clock\n"); >> - ret = PTR_ERR(clk); >> - goto err2; >> - } >> - >> - ret = clk_enable(clk); >> - if (ret) { >> - dev_err(&pdev->dev, "failed to enable clock\n"); >> - goto err3; >> - } >> - >> musb->dev.parent = &pdev->dev; >> musb->dev.dma_mask = &omap2430_dmamask; >> musb->dev.coherent_dma_mask = omap2430_dmamask; >> >> glue->dev = &pdev->dev; >> glue->musb = musb; >> - glue->clk = clk; >> >> pdata->platform_ops = &omap2430_ops; >> >> @@ -429,28 +393,30 @@ static int __init omap2430_probe(struct >> pdev->num_resources); >> if (ret) { >> dev_err(&pdev->dev, "failed to add resources\n"); >> - goto err4; >> + goto err2; >> } >> >> ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); >> if (ret) { >> dev_err(&pdev->dev, "failed to add platform_data\n"); >> - goto err4; >> + goto err2; >> } >> >> ret = platform_device_add(musb); >> if (ret) { >> dev_err(&pdev->dev, "failed to register musb device\n"); >> - goto err4; >> + goto err2; >> } >> >> - return 0; >> + pm_runtime_enable(&pdev->dev); >> + if (pm_runtime_get_sync(&pdev->dev)) { >> + dev_err(&pdev->dev, "pm_runtime_get_sync FAILED"); >> + pm_runtime_disable(&pdev->dev); >> + goto err2; >> + } >> >> -err4: >> - clk_disable(clk); >> + return 0; >> >> -err3: >> - clk_put(clk); >> >> err2: >> platform_device_put(musb); >> @@ -468,8 +434,8 @@ static int __exit omap2430_remove(struct >> >> platform_device_del(glue->musb); >> platform_device_put(glue->musb); >> - clk_disable(glue->clk); >> - clk_put(glue->clk); >> + pm_runtime_put_sync(&pdev->dev); >> + pm_runtime_disable(&pdev->dev); >> kfree(glue); >> >> return 0; >> @@ -478,13 +444,11 @@ static int __exit omap2430_remove(struct >> #ifdef CONFIG_PM >> static void omap2430_save_context(struct musb *musb) >> { >> - musb->context.otg_sysconfig = musb_readl(musb->mregs, >OTG_SYSCONFIG); >> musb->context.otg_forcestandby = >musb_readl(musb->mregs, OTG_FORCESTDBY); >> } >> >> static void omap2430_restore_context(struct musb *musb) >> { >> - musb_writel(musb->mregs, OTG_SYSCONFIG, >musb->context.otg_sysconfig); >> musb_writel(musb->mregs, OTG_FORCESTDBY, >musb->context.otg_forcestandby); >> } >> >> @@ -496,8 +460,11 @@ static int omap2430_suspend(struct devic >> omap2430_low_level_exit(musb); >> otg_set_suspend(musb->xceiv, 1); >> omap2430_save_context(musb); >> - clk_disable(glue->clk); >> >> + if (pm_runtime_put_sync(dev)) { >> + dev_err(dev, "pm_runtime_put_sync FAILED"); >> + return -EINVAL; >> + } > >runtime suspend transitions are disabled when system suspend/resume is >happening, so if the device is not already runtime suspended, this call >will have no effect, and the OTG block will be active during suspend >(preventing it's powerdomain from hitting retention/off.) > >What is needed here is a direct call into the bus runtime methods. See >the similar patch I did for i2c: > Thanks for the info. Yesterday while testing the power management I realized this. And I changed it as per your I2C patch. I will send the new version of patch soon on this. Regards, Hema > http://marc.info/?l=linux-omap&m=129617401612954&w=2 > >Kevin > > > >> return 0; >> } >> >> @@ -505,14 +472,11 @@ static int omap2430_resume(struct device >> { >> struct omap2430_glue *glue = dev_get_drvdata(dev); >> struct musb *musb = glue_to_musb(glue); >> - int ret; >> >> - ret = clk_enable(glue->clk); >> - if (ret) { >> - dev_err(dev, "faled to enable clock\n"); >> - return ret; >> + if (pm_runtime_get_sync(dev)) { >> + dev_err(dev, "pm_runtime_get_sync FAILED"); >> + return -EINVAL; >> } >> - >> omap2430_low_level_init(musb); >> omap2430_restore_context(musb); >> otg_set_suspend(musb->xceiv, 0); >> Index: usb/drivers/usb/musb/musb_core.h >> =================================================================== >> --- usb.orig/drivers/usb/musb/musb_core.h >> +++ usb/drivers/usb/musb/musb_core.h >> @@ -360,7 +360,7 @@ struct musb_context_registers { >> >> #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \ >> defined(CONFIG_ARCH_OMAP4) >> - u32 otg_sysconfig, otg_forcestandby; >> + u32 otg_forcestandby; >> #endif >> u8 power; >> u16 intrtxe, intrrxe; > > Regards, Hema > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
