Add regulator VMMC1 used by SD/MMC card slot1 in 2430sdp.
Signed-off-by: Balaji T K <balajitk@xxxxxx>
---
Tested on OMAP2430 SDP with busybox filesystem mounted on MMC1
arch/arm/mach-omap2/board-2430sdp.c | 21 +++++++++++++++++++++
1 files changed, 21 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index e066177..361f6cb 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -22,6 +22,7 @@
#include <linux/mmc/host.h>
#include <linux/delay.h>
#include <linux/i2c/twl.h>
+#include <linux/regulator/machine.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -148,6 +149,25 @@ static void __init omap_2430sdp_init_irq(void)
omap_init_irq();
}
+static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = {
+ REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0"),
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data sdp2430_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(sdp2430_vmmc1_supplies),
+ .consumer_supplies = &sdp2430_vmmc1_supplies[0],
+};
+
static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
@@ -160,6 +180,7 @@ static struct twl4030_platform_data sdp2430_twldata = {
/* platform_data for children goes here */
.gpio = &sdp2430_gpio_data,
+ .vmmc1 = &sdp2430_vmmc1,
};
static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = {
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
