From: Rajendra Nayak <rnayak@xxxxxx>
Enable hardware gate control for all dpll MX postdividers.
This requires the allow_idle/deny_idle functions to be
populated for all clock nodes (mx post dividers) in
clkops.
The autogen script is updated for the same.
Signed-off-by: Rajendra Nayak <rnayak@xxxxxx>
---
arch/arm/mach-omap2/clock.c | 5 ++++
arch/arm/mach-omap2/clock.h | 1 +
arch/arm/mach-omap2/clock44xx_data.c | 40 +++++++++++++++++-----------------
3 files changed, 26 insertions(+), 20 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 8ec618e..73a2886 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -388,6 +388,11 @@ const struct clkops clkops_omap3_core_dpll_ops = {
#endif
+const struct clkops clkops_omap4_dpllmx_ops = {
+ .allow_idle = omap4_dpllmx_allow_gatectrl,
+ .deny_idle = omap4_dpllmx_deny_gatectrl,
+};
+
/*
* OMAP2+ clock reset and init functions
*/
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index c450d69..0725a6a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -150,5 +150,6 @@ extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
extern const struct clkops clkops_omap3_noncore_dpll_ops;
extern const struct clkops clkops_omap3_core_dpll_ops;
+extern const struct clkops clkops_omap4_dpllmx_ops;
#endif
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 3fb8d2b..3ca47ae 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -329,7 +329,7 @@ static struct clk dpll_abe_m2x2_ck = {
.clksel = dpll_abe_m2x2_div,
.clksel_reg = OMAP4430_CM_DIV_M2_DPLL_ABE,
.clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK,
- .ops = &clkops_null,
+ .ops = &clkops_omap4_dpllmx_ops,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
@@ -396,7 +396,7 @@ static struct clk dpll_abe_m3x2_ck = {
.clksel = dpll_abe_m2x2_div,
.clksel_reg = OMAP4430_CM_DIV_M3_DPLL_ABE,
.clksel_mask = OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
- .ops = &clkops_null,
+ .ops = &clkops_omap4_dpllmx_ops,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
@@ -466,7 +466,7 @@ static struct clk dpll_core_m6x2_ck = {
.clksel = dpll_core_m6x2_div,
.clksel_reg = OMAP4430_CM_DIV_M6_DPLL_CORE,
.clksel_mask = OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK,
- .ops = &clkops_null,
+ .ops = &clkops_omap4_dpllmx_ops,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
@@ -496,7 +496,7 @@ static struct clk dpll_core_m2_ck = {
.clksel = dpll_core_m2_div,
.clksel_reg = OMAP4430_CM_DIV_M2_DPLL_CORE,
.clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK,
- .ops = &clkops_null,
+ .ops = &clkops_omap4_dpllmx_ops,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
@@ -516,7 +516,7 @@ static struct clk dpll_core_m5x2_ck = {
.clksel = dpll_core_m6x2_div,
.clksel_reg = OMAP4430_CM_DIV_M5_DPLL_CORE,
.clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK,
- .ops = &clkops_null,
+ .ops = &clkops_omap4_dpllmx_ops,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
@@ -582,7 +582,7 @@ static struct clk dpll_core_m4x2_ck = {
.clksel = dpll_core_m6x2_div,
.clksel_reg = OMAP4430_CM_DIV_M4_DPLL_CORE,
.clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK,
- .ops = &clkops_null,
+ .ops = &clkops_omap4_dpllmx_ops,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
@@ -607,7 +607,7 @@ static struct clk dpll_abe_m2_ck = {
.clksel = dpll_abe_m2_div,
.clksel_reg = OMAP4430_CM_DIV_M2_DPLL_ABE,
.clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK,
- .ops = &clkops_null,
+ .ops = &clkops_omap4_dpllmx_ops,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
@@ -633,7 +633,7 @@ static struct clk dpll_core_m7x2_ck = {
.clksel = dpll_core_m6x2_div,
.clksel_reg = OMAP4430_CM_DIV_M7_DPLL_CORE,
.clksel_mask = OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK,
- .ops = &clkops_null,
+ .ops = &clkops_omap4_dpllmx_ops,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
@@ -705,7 +705,7 @@ static struct clk dpll_iva_m4x2_ck = {
.clksel = dpll_iva_m4x2_div,
.clksel_reg = OMAP4430_CM_DIV_M4_DPLL_IVA,
.clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK,
- .ops = &clkops_null,
+ .ops = &clkops_omap4_dpllmx_ops,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
@@ -717,7 +717,7 @@ static struct clk dpll_iva_m5x2_ck = {
.clksel = dpll_iva_m4x2_div,
.clksel_reg = OMAP4430_CM_DIV_M5_DPLL_IVA,
.clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK,
- .ops = &clkops_null,
+ .ops = &clkops_omap4_dpllmx_ops,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
@@ -765,7 +765,7 @@ static struct clk dpll_mpu_m2_ck = {
.clksel = dpll_mpu_m2_div,
.clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU,
.clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK,
- .ops = &clkops_null,
+ .ops = &clkops_omap4_dpllmx_ops,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
@@ -838,7 +838,7 @@ static struct clk dpll_per_m2_ck = {
.clksel = dpll_per_m2_div,
.clksel_reg = OMAP4430_CM_DIV_M2_DPLL_PER,
.clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK,
- .ops = &clkops_null,
+ .ops = &clkops_omap4_dpllmx_ops,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
@@ -862,7 +862,7 @@ static struct clk dpll_per_m2x2_ck = {
.clksel = dpll_per_m2x2_div,
.clksel_reg = OMAP4430_CM_DIV_M2_DPLL_PER,
.clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK,
- .ops = &clkops_null,
+ .ops = &clkops_omap4_dpllmx_ops,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
@@ -888,7 +888,7 @@ static struct clk dpll_per_m4x2_ck = {
.clksel = dpll_per_m2x2_div,
.clksel_reg = OMAP4430_CM_DIV_M4_DPLL_PER,
.clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK,
- .ops = &clkops_null,
+ .ops = &clkops_omap4_dpllmx_ops,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
@@ -900,7 +900,7 @@ static struct clk dpll_per_m5x2_ck = {
.clksel = dpll_per_m2x2_div,
.clksel_reg = OMAP4430_CM_DIV_M5_DPLL_PER,
.clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK,
- .ops = &clkops_null,
+ .ops = &clkops_omap4_dpllmx_ops,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
@@ -912,7 +912,7 @@ static struct clk dpll_per_m6x2_ck = {
.clksel = dpll_per_m2x2_div,
.clksel_reg = OMAP4430_CM_DIV_M6_DPLL_PER,
.clksel_mask = OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK,
- .ops = &clkops_null,
+ .ops = &clkops_omap4_dpllmx_ops,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
@@ -924,7 +924,7 @@ static struct clk dpll_per_m7x2_ck = {
.clksel = dpll_per_m2x2_div,
.clksel_reg = OMAP4430_CM_DIV_M7_DPLL_PER,
.clksel_mask = OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK,
- .ops = &clkops_null,
+ .ops = &clkops_omap4_dpllmx_ops,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
@@ -980,7 +980,7 @@ static struct clk dpll_unipro_m2x2_ck = {
.clksel = dpll_unipro_m2x2_div,
.clksel_reg = OMAP4430_CM_DIV_M2_DPLL_UNIPRO,
.clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK,
- .ops = &clkops_null,
+ .ops = &clkops_omap4_dpllmx_ops,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
@@ -1029,7 +1029,7 @@ static struct clk dpll_usb_ck = {
static struct clk dpll_usb_clkdcoldo_ck = {
.name = "dpll_usb_clkdcoldo_ck",
.parent = &dpll_usb_ck,
- .ops = &clkops_null,
+ .ops = &clkops_omap4_dpllmx_ops,
.recalc = &followparent_recalc,
};
@@ -1044,7 +1044,7 @@ static struct clk dpll_usb_m2_ck = {
.clksel = dpll_usb_m2_div,
.clksel_reg = OMAP4430_CM_DIV_M2_DPLL_USB,
.clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK,
- .ops = &clkops_null,
+ .ops = &clkops_omap4_dpllmx_ops,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
