On Wed, Dec 08, 2010 at 09:31:15PM +0530, Hema HK wrote:
Adding the twl6030-usb transceiver support for OMAP4 musb driver.
OMAP4 supports 2 types of transceiver interface.
1. UTMI: The PHY is embedded within OMAP4. The transceiver functionality
is split between the twl6030 PMIC chip and OMAP4430. The VBUS, ID pin
sensing and OTG SRP generation part is integrated in TWL6030 and UTMI PHY
functionality is embedded within the OMAP4430.
There is no direct interactions between the MUSB controller and TWL6030
chip to communicate the session-valid, session-end and ID-GND events.
It has to be done through a software by setting/resetting bits in
one of the control module register of OMAP4430 which in turn toggles
the appropriate signals to MUSB controller.
The internal transceiver has functional clocks and
powerdown bits to powerdown the PHY for power saving.
Since there is no option available for having 2 transceiver drivers
for one USB controller, internal PHY specific APIs are passed through
plaform_data function pointers to use in the twl6030-usb transceiver
driver.
2. ULPI interface is provided for off-chip transceivers.
Signed-off-by: Hema HK <hemahk@xxxxxx>
Cc: Felipe Balbi <balbi@xxxxxx>
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
Cc: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
---
arch/arm/mach-omap2/omap_phy_internal.c | 133 ++++++++
arch/arm/plat-omap/include/plat/usb.h | 4
drivers/usb/otg/Makefile | 1
drivers/usb/otg/twl6030-usb.c | 514 ++++++++++++++++++++++++++++++++
4 files changed, 652 insertions(+)
Index: linux-2.6/arch/arm/mach-omap2/omap_phy_internal.c
===================================================================
--- /dev/null
+++ linux-2.6/arch/arm/mach-omap2/omap_phy_internal.c
@@ -0,0 +1,148 @@
+/*
+ * This file configures the internal USB PHY in OMAP4430. Used
+ * with TWL6030 transceiver and MUSB on OMAP4430.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *Author: Hema HK <hemahk@xxxxxx>
^^ you need a space after *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/usb.h>
+
+#include <plat/usb.h>
+
+/* OMAP control module register for UTMI PHY */
+#define CONTROL_DEV_CONF 0x300
+#define PHY_PD 0x1
+
+#define USBOTGHS_CONTROL 0x33c
+#define AVALID BIT(0)
+#define BVALID BIT(1)
+#define VBUSVALID BIT(2)
+#define SESSEND BIT(3)
+#define IDDIG BIT(4)
+
+static struct clk *phyclk, *clk48m, *clk32k;
+static void __iomem *ctrl_base;
+
+int omap4430_phy_init(struct device *dev)
+{
+ ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
+ if (!ctrl_base) {
+ dev_err(dev, "control module ioremap failed\n");
+ return -ENOMEM;
+ }
+ /* Power down the phy */
+ __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+ phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
+
+ if (IS_ERR(phyclk)) {
+ dev_err(dev, "cannot clk_get ocp2scp_usb_phy_ick\n");
+ iounmap(ctrl_base);
+ return PTR_ERR(phyclk);
+ }
+
+ clk48m = clk_get(dev, "ocp2scp_usb_phy_phy_48m");
+ if (IS_ERR(clk48m)) {
+ dev_err(dev, "cannot clk_get ocp2scp_usb_phy_phy_48m\n");
+ clk_put(phyclk);
+ iounmap(ctrl_base);
+ return PTR_ERR(clk48m);
+ }
+
+ clk32k = clk_get(dev, "usb_phy_cm_clk32k");
+ if (IS_ERR(clk32k)) {
+ dev_err(dev, "cannot clk_get usb_phy_cm_clk32k\n");
+ clk_put(phyclk);
+ clk_put(clk48m);
+ iounmap(ctrl_base);
+ return PTR_ERR(clk32k);
+ }
+ return 0;
+}
+
+int omap4430_phy_set_clk(struct device *dev, int on)
+{
+ static int state;
+
+ if (on && !state) {
+ /* Enable the phy clocks */
+ clk_enable(phyclk);
+ clk_enable(clk48m);
+ clk_enable(clk32k);
+ state = 1;
+ } else if (state) {
+ /* Disable the phy clocks */
+ clk_disable(phyclk);
+ clk_disable(clk48m);
+ clk_disable(clk32k);
+ state = 0;
+ }
+ return 0;
+}
+
+int omap4430_phy_power(struct device *dev, int ID, int on)
+{
+ if (on) {
+ /* enabled the clocks */
+ omap4430_phy_set_clk(dev, 1);
+ /* power on the phy */
+ if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {
+ __raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+ mdelay(200);
+ }
+ if (ID)
+ /* enable VBUS valid, IDDIG groung */
+ __raw_writel(AVALID | VBUSVALID, ctrl_base +
+ USBOTGHS_CONTROL);
+ else
+ /*
+ * Enable VBUS Valid, AValid and IDDIG
+ * high impedence
+ */
+ __raw_writel(IDDIG | AVALID | VBUSVALID,
+ ctrl_base + USBOTGHS_CONTROL);
+ } else {
+ /* Enable session END and IDIG to high impedence. */
+ __raw_writel(SESSEND | IDDIG, ctrl_base +
+ USBOTGHS_CONTROL);
+ /* Disable the clocks */
+ omap4430_phy_set_clk(dev, 0);
+ /* Power down the phy */
+ __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+ }
+
+ return 0;
+}
+
+int omap4430_phy_exit(struct device *dev)
+{
+ if (ctrl_base)
+ iounmap(ctrl_base);
+ if (phyclk)
+ clk_put(phyclk);
+ if (clk48m)
+ clk_put(clk48m);
+ if (clk32k)
+ clk_put(clk32k);
+
+ return 0;
+}
+
+
two blank lines at the end of file. I like to use one, but people say it
should be none :-p
Anyway, can this be converted into a platform driver ? Then you could
power it on/off with pm_runtime ?!? You wouldn't need to export
functions either.
It could be that's not possible, but doesn't hurt asking.
Index: linux-2.6/arch/arm/plat-omap/include/plat/usb.h
===================================================================
--- linux-2.6.orig/arch/arm/plat-omap/include/plat/usb.h
+++ linux-2.6/arch/arm/plat-omap/include/plat/usb.h
@@ -79,6 +79,12 @@ extern void usb_ehci_init(const struct e
extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata);
+extern int omap4430_phy_power(struct device *dev, int ID, int on);
+extern int omap4430_phy_set_clk(struct device *dev, int on);
+extern int omap4430_phy_init(struct device *dev);
+extern int omap4430_phy_exit(struct device *dev);
+
+
one blank line only.
Index: linux-2.6/drivers/usb/otg/twl6030-usb.c
===================================================================
--- /dev/null
+++ linux-2.6/drivers/usb/otg/twl6030-usb.c
@@ -0,0 +1,520 @@
+/*
+ * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *Author: Hema HK <hemahk@xxxxxx>
^^ space
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/usb/otg.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/notifier.h>
+#include <linux/slab.h>
+
+/* usb register definitions */
+#define USB_VENDOR_ID_LSB 0x00
+#define USB_VENDOR_ID_MSB 0x01
+#define USB_PRODUCT_ID_LSB 0x02
+#define USB_PRODUCT_ID_MSB 0x03
+#define USB_VBUS_CTRL_SET 0x04
+#define USB_VBUS_CTRL_CLR 0x05
+#define USB_ID_CTRL_SET 0x06
+#define USB_ID_CTRL_CLR 0x07
+#define USB_VBUS_INT_SRC 0x08
+#define USB_VBUS_INT_LATCH_SET 0x09
+#define USB_VBUS_INT_LATCH_CLR 0x0A
+#define USB_VBUS_INT_EN_LO_SET 0x0B
+#define USB_VBUS_INT_EN_LO_CLR 0x0C
+#define USB_VBUS_INT_EN_HI_SET 0x0D
+#define USB_VBUS_INT_EN_HI_CLR 0x0E
+#define USB_ID_INT_SRC 0x0F
+#define USB_ID_INT_LATCH_SET 0x10
+#define USB_ID_INT_LATCH_CLR 0x11
+
+
+#define USB_ID_INT_EN_LO_SET 0x12
+#define USB_ID_INT_EN_LO_CLR 0x13
+#define USB_ID_INT_EN_HI_SET 0x14
+#define USB_ID_INT_EN_HI_CLR 0x15
I wonder why HW people didn't follow ULPI spec here. What a mess...
+#define USB_OTG_ADP_CTRL 0x16
+#define USB_OTG_ADP_HIGH 0x17
+#define USB_OTG_ADP_LOW 0x18
+#define USB_OTG_ADP_RISE 0x19
+#define USB_OTG_REVISION 0x1A
... then these would only be a set of extended registers.
+/* to be moved to LDO */
+#define MISC2 0xE5
+#define CFG_LDO_PD2 0xF5
prepend with USB_
+#define USB_BACKUP_REG 0xFA
+
+#define STS_HW_CONDITIONS 0x21
+
+/* In module TWL6030_MODULE_PM_MASTER */
+#define PROTECT_KEY 0x0E
defined in <linux/i2c/twl.h>
+#define STS_HW_CONDITIONS 0x21
+#define STS_USB_ID BIT(2)
+
+/* In module TWL6030_MODULE_PM_RECEIVER */
+#define VUSB_DEDICATED1 0x7D
+#define VUSB_DEDICATED2 0x7E
+#define VUSB1V5_DEV_GRP 0x71
+#define VUSB1V5_TYPE 0x72
+#define VUSB1V5_REMAP 0x73
+#define VUSB1V8_DEV_GRP 0x74
+#define VUSB1V8_TYPE 0x75
+#define VUSB1V8_REMAP 0x76
+#define VUSB3V1_DEV_GRP 0x77
+#define VUSB3V1_TYPE 0x78
+#define VUSB3V1_REMAP 0x79
+
+/* In module TWL6030_MODULE_PM_RECEIVER */
+#define VUSB_CFG_TRANS 0x71
+#define VUSB_CFG_STATE 0x72
+#define VUSB_CFG_VOLTAGE 0x73
+
+/* in module TWL6030_MODULE_MAIN_CHARGE */
+
+#define CHARGERUSB_CTRL1 0x8
+
+#define CONTROLLER_STAT1 0x03
+#define VBUS_DET BIT(2)
+
+
+/* OMAP control module register for UTMI PHY */
+#define ONTROL_DEV_CONF 0x300
did you mean CONTROL ??
+#define PHY_PD 0x1
+
+#define USBOTGHS_CONTROL 0x33c
+#define AVALID BIT(0)
+#define BVALID BIT(1)
+#define VBUSVALID BIT(2)
+#define SESSEND BIT(3)
+#define IDDIG BIT(4)
these are likely to give namespace colision at some point, append with
USB_ or better change USB_ to TWL6030_USB_
+static int __devinit twl6030_usb_probe(struct platform_device *pdev)
+{
+ struct twl6030_usb *twl;
+ int status, err;
+ struct twl4030_usb_data *pdata;
+ struct device *dev = &pdev->dev;
+ pdata = dev->platform_data;
+
+ twl = kzalloc(sizeof *twl, GFP_KERNEL);
+ if (!twl)
+ return -ENOMEM;
+
+ twl->dev = &pdev->dev;
+ twl->irq1 = platform_get_irq(pdev, 0);
+ twl->irq2 = platform_get_irq(pdev, 1);
+ twl->otg.dev = twl->dev;
+ twl->otg.label = "twl6030";
+ twl->otg.set_host = twl6030_set_host;
+ twl->otg.set_peripheral = twl6030_set_peripheral;
+ twl->asleep = 1;
better to read this from HW and avoid problems if bootloaders wakes this
one up.
--
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
