On Mon, Dec 06, 2010 at 07:59:59AM -0800, Tony Lindgren wrote: > * Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx> [101206 04:45]: > > > > ------------[ cut here ]------------ > > WARNING: at arch/arm/mach-omap2/omap_hwmod.c:1185 _omap_hwmod_enable+0x34/0x114() > > omap_hwmod: wd_timer2: enabled state can only be entered from initialized, idle, or disabled state > > Modules linked in: > > ---[ end trace 1b75b31a2719ed1c ]--- > > wd_timer2: Could not enable clocks for omap2_disable_wdt > > It seems like there's a problem handling a watchdog that's enabled > in the bootloader.. But that's not the only problem, looks like I'm > getting this on overo: > > omap_device: omap_wdt.-1: new worst case activate latency 0: 122070 > OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec > omap_device: omap_wdt.-1: new worst case deactivate latency 0: 30517 > twl4030_wdt twl4030_wdt: Failed to register misc device > twl4030_wdt: probe of twl4030_wdt failed with error -16 -16 = -EBUSY, which is probably because you have two watchdogs. The watchdog subsystem has one minor device number, so you can only have one watchdog registered. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html