This patch series which incorporates changes in DSS2 to enable
omap_dss_device instances to use the new Overlay Manager LCD2 in
DISPC.
On OMAP4, we have a new DISPC channel for Overlay Manager LCD2. This
channel's video port is a source port for RFBI, DSI2 and DPI. The
Primary channel's video port is connected to RFBI and DSI1.
There is a set of regsiters for LCD2 channel similar to the existing
LCD channel, like DISPC_CONTROL2, DISPC_DIVISOR2, DISPC_CONFIG2 and so
on.
In order to decide which LCD Overlay Manager to configure(LCD/LCD2),
there is a need for the omap_dss_device instances to tell the interface
drivers(DSI, DPI, RFBI etc) which LCD channel they want to connect to, so
that the corresponding registers get configured. Therefore, a new
enum omap_channel member is introduced to omap_dss_device.
This design was made keeping in mind the possible addition of more
Overlay Managers in future OMAPs, this code is also backward compatible
with OMAP3 as omap_dss_device instances in OMAP3 will stick only with
OMAP_DSS_CHANNEL_LCD.
Archit Taneja (2):
OMAP: DSS2: Add dss_features for omap4 and overlay manager related
features
OMAP: DSS2: Use dss_features to handle DISPC bits removed on OMAP4
Sumit Semwal (5):
OMAP: DSS2: Represent DISPC register defines with channel as
parameter
OMAP: DSS2: Introduce omap_channel argument to DISPC functions used
by interface drivers
OMAP: DSS2: Change remaining DISPC functions for new omap_channel
argument
OMAP: DSS2: LCD2 Channel Changes for DISPC
OMAP: DSS2: Introduce omap_channel as an omap_dss_device parameter,
add new overlay manager.
arch/arm/plat-omap/include/plat/display.h | 8 +
drivers/video/omap2/dss/dispc.c | 558 ++++++++++++++++++++---------
drivers/video/omap2/dss/dpi.c | 40 ++-
drivers/video/omap2/dss/dsi.c | 25 +-
drivers/video/omap2/dss/dss.h | 36 ++-
drivers/video/omap2/dss/dss_features.c | 43 +++-
drivers/video/omap2/dss/dss_features.h | 7 +-
drivers/video/omap2/dss/manager.c | 77 +++--
drivers/video/omap2/dss/overlay.c | 14 +-
drivers/video/omap2/dss/rfbi.c | 20 +-
drivers/video/omap2/dss/sdi.c | 24 +-
11 files changed, 586 insertions(+), 266 deletions(-)
--
Version 6:
- Improve git commit messages
- Move addition of omap_channel member in omap_dss_device in the patch which
brings the change in dss_recheck_connections().
Version 5:
- Replaced dssdev->channel with dssdev->manager->id in interface driver
calls, dssdev->channel is only used once in dss_recheck_connections()
to set up the connection between panel device and dispc managers
- DISPC_CONTROL and DISPC_CONFIG registers are not defined with channel
as a parameter.
Version 4:
- Broken into smaller patches in order to build in between patches.
- Some basic cleanup
Version 3:
- Patches are reworked over dss2 features framework. Number of patches
are reduced.
Version 2:
- The DISPC_BASE macro now isn't changed for OMAP4, a future
hwmod patch will take care of this dynamically.
- Supported_displays member of manager is now assigned correctly
for OMAP2.
- DISPC Registers common to LCD and LCD2 channels are not defined
separately, now there is a parameter which differentiates between
the 2 channels.
- Secondary LCD manager is now named as lcd2 instead of 2lcd, the
patch given in the link below allows DSS2 interpret this correctly.
Version 1:
http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg31458.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
