Re: [PATCH v7 05/11] OMAP2420: hwmod data: Add GPIO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/23/2010 3:56 PM, Varadarajan, Charulatha wrote:
Add GPIO hwmod data for OMAP2420

Signed-off-by: Charulatha V<charu@xxxxxx>
---
  arch/arm/mach-omap2/omap_hwmod_2420_data.c |  229 ++++++++++++++++++++++++++++
  arch/arm/plat-omap/include/plat/gpio.h     |    5 +
  2 files changed, 234 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index a1a3dd6..c951061 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -17,6 +17,7 @@
  #include<plat/dma.h>
  #include<plat/serial.h>
  #include<plat/i2c.h>
+#include<plat/gpio.h>
  #include<plat/omap24xx.h>
Do you still need that header file?


  #include "omap_hwmod_common_data.h"
@@ -38,6 +39,10 @@ static struct omap_hwmod omap2420_iva_hwmod;
  static struct omap_hwmod omap2420_l3_main_hwmod;
  static struct omap_hwmod omap2420_l4_core_hwmod;
  static struct omap_hwmod omap2420_wd_timer2_hwmod;
+static struct omap_hwmod omap2420_gpio1_hwmod;
+static struct omap_hwmod omap2420_gpio2_hwmod;
+static struct omap_hwmod omap2420_gpio3_hwmod;
+static struct omap_hwmod omap2420_gpio4_hwmod;

  /* L3 ->  L4_CORE interface */
  static struct omap_hwmod_ocp_if omap2420_l3_main__l4_core = {
@@ -557,6 +562,224 @@ static struct omap_hwmod omap2420_i2c2_hwmod = {
  	.flags		= HWMOD_16BIT_REG,
  };

+/* l4_wkup ->  gpio1 */
+static struct omap_hwmod_addr_space omap2420_gpio1_addr_space[] = {
+	{
+		.pa_start	= 0x48018000,
+		.pa_end		= 0x480181ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio1 = {
+	.master		=&omap2420_l4_wkup_hwmod,
+	.slave		=&omap2420_gpio1_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2420_gpio1_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_gpio1_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup ->  gpio2 */
+static struct omap_hwmod_addr_space omap2420_gpio2_addr_space[] = {
+	{
+		.pa_start	= 0x4801a000,
+		.pa_end		= 0x4801a1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio2 = {
+	.master		=&omap2420_l4_wkup_hwmod,
+	.slave		=&omap2420_gpio2_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2420_gpio2_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_gpio2_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup ->  gpio3 */
+static struct omap_hwmod_addr_space omap2420_gpio3_addr_space[] = {
+	{
+		.pa_start	= 0x4801c000,
+		.pa_end		= 0x4801c1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio3 = {
+	.master		=&omap2420_l4_wkup_hwmod,
+	.slave		=&omap2420_gpio3_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2420_gpio3_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_gpio3_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup ->  gpio4 */
+static struct omap_hwmod_addr_space omap2420_gpio4_addr_space[] = {
+	{
+		.pa_start	= 0x4801e000,
+		.pa_end		= 0x4801e1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio4 = {
+	.master		=&omap2420_l4_wkup_hwmod,
+	.slave		=&omap2420_gpio4_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2420_gpio4_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_gpio4_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gpio dev_attr */
+static struct omap_gpio_dev_attr gpio_dev_attr = {
+	.bank_width = 32,
+	.dbck_flag = false,
+};
+
+static struct omap_hwmod_class_sysconfig omap242x_gpio_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields    =&omap_hwmod_sysc_type1,
+};
+
+/*
+ * 'gpio' class
+ * general purpose io module
+ */
+static struct omap_hwmod_class omap242x_gpio_hwmod_class = {
+	.name = "gpio",
+	.sysc =&omap242x_gpio_sysc,
+	.rev = 0,
+};
+
+/* gpio1 */
+static struct omap_hwmod_irq_info omap242x_gpio1_irqs[] = {
+	{ .name = "gpio_mpu_irq", .irq = 29 }, /* INT_24XX_GPIO_BANK1 */
+};
+
+static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = {
+	&omap2420_l4_wkup__gpio1,
+};
+
+static struct omap_hwmod omap2420_gpio1_hwmod = {
+	.name		= "gpio1",
+	.mpu_irqs	= omap242x_gpio1_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio1_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2420_gpio1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio1_slaves),
+	.class		=&omap242x_gpio_hwmod_class,
+	.dev_attr	=&gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+/* gpio2 */
+static struct omap_hwmod_irq_info omap242x_gpio2_irqs[] = {
+	{ .name = "gpio_mpu_irq", .irq = 30 }, /* INT_24XX_GPIO_BANK2 */
+};
+
+static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = {
+	&omap2420_l4_wkup__gpio2,
+};
+
+static struct omap_hwmod omap2420_gpio2_hwmod = {
+	.name		= "gpio2",
+	.mpu_irqs	= omap242x_gpio2_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio2_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2420_gpio2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio2_slaves),
+	.class		=&omap242x_gpio_hwmod_class,
+	.dev_attr	=&gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+/* gpio3 */
+static struct omap_hwmod_irq_info omap242x_gpio3_irqs[] = {
+	{ .name = "gpio_mpu_irq", .irq = 31 }, /* INT_24XX_GPIO_BANK3 */
+};
+
+static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = {
+	&omap2420_l4_wkup__gpio3,
+};
+
+static struct omap_hwmod omap2420_gpio3_hwmod = {
+	.name		= "gpio3",
+	.mpu_irqs	= omap242x_gpio3_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio3_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2420_gpio3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio3_slaves),
+	.class		=&omap242x_gpio_hwmod_class,
+	.dev_attr	=&gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+/* gpio4 */
+static struct omap_hwmod_irq_info omap242x_gpio4_irqs[] = {
+	{ .name = "gpio_mpu_irq", .irq = 32 }, /* INT_24XX_GPIO_BANK4 */
+};
+
+static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = {
+	&omap2420_l4_wkup__gpio4,
+};
+
+static struct omap_hwmod omap2420_gpio4_hwmod = {
+	.name		= "gpio4",
+	.mpu_irqs	= omap242x_gpio4_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio4_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2420_gpio4_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio4_slaves),
+	.class		=&omap242x_gpio_hwmod_class,
+	.dev_attr	=&gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
  static __initdata struct omap_hwmod *omap2420_hwmods[] = {
  	&omap2420_l3_main_hwmod,
  	&omap2420_l4_core_hwmod,
@@ -569,6 +792,12 @@ static __initdata struct omap_hwmod *omap2420_hwmods[] = {
  	&omap2420_uart3_hwmod,
  	&omap2420_i2c1_hwmod,
  	&omap2420_i2c2_hwmod,
+
+	/* gpio class */
+	&omap2420_gpio1_hwmod,
+	&omap2420_gpio2_hwmod,
+	&omap2420_gpio3_hwmod,
+	&omap2420_gpio4_hwmod,
  	NULL,
  };

diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h

That change should not necessarily be there, it is not directly related to the subject.

Maybe that should be in an extra patch just before that one.

Beside these 2 minor comments, that patch seems good to me.

Almost-acked-by: Benoit Cousson <b-cousson@xxxxxx>

Regards,
Benoit

index 5bef86d..24892a6 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -79,6 +79,11 @@
  #define METHOD_GPIO_24XX	5
  #define METHOD_GPIO_44XX	6

+struct omap_gpio_dev_attr {
+	int bank_width;		/* GPIO bank width */
+	bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
+};
+
  struct omap_gpio_platform_data {
  	u16 virtual_irq_start;
  	int bank_type;

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux