TAO, > -----Original Message----- > From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap- > owner@xxxxxxxxxxxxxxx] On Behalf Of TAO HU > Sent: Wednesday, November 24, 2010 10:05 AM > To: Bryan Wu > Cc: TAO HU; linux-omap > Subject: Re: OMAP4 ES2.0 Unhandled fault: imprecise external abort > > Hi, Bryan > > Thanks. > > Unfortunately, it is not easy to reproduce the problem in our HW. > We only observed 2~3 times so far. > > But we do enable HIGHMEM, SMP and L2 cache in our config. > That's why I'd like to know the root cause. > > On Wed, Nov 24, 2010 at 12:21 PM, Bryan Wu <bryan.wu@xxxxxxxxxxxxx> wrote: > > Tao Hu, > > > > Did you try the similar solution in our Ubuntu kernel? We suspect it > > related to HIGHMEM, SMP and cache control code. > > And how about your test case? > > > > Thanks a lot, > > -Bryan > > > > On Wed, Nov 24, 2010 at 11:11 AM, TAO HU <tghk48@xxxxxxxxxxxx> wrote: > >> Hi, All > >> > >> We got following errors on OMAP ES2.0 board. > >> > >> And noticed a similar case was reported at below link > >> http://www.opensubscriber.com/message/kernel- > team@xxxxxxxxxxxxxxxx/14591440.html > >> > >> Is any conclusion/fix available? > >> > >> <1>[ 348.873840] Unhandled fault: imprecise external abort (0x1406) at > >> 0x462d301c > >> <1>[ 348.885040] Unhandled fault: imprecise external abort (0x1406) at > >> 0xbe8fec78 > >> <1>[ 348.897247] Unhandled fault: imprecise external abort (0x1406) at > >> 0xbe8fec78 > >> <1>[ 348.954772] Unhandled fault: imprecise external abort (0x1406) at > >> 0xb000c454 > >> <1>[ 348.967590] Unhandled fault: imprecise external abort (0x1406) at > >> 0xb000c454 > >> <1>[ 348.989471] Unhandled fault: imprecise external abort (0x1406) at > >> 0xbeb02fb8 > >> <4>[ 349.006683] Process 2664(coredump) has RLIMIT_CORE set to 1 > >> <4>[ 349.012481] Aborting core > >> <1>[ 349.023040] Unhandled fault: imprecise external abort (0x1406) at > >> 0xbeb02fb8 > >> <1>[ 349.041625] Unhandled fault: imprecise external abort (0x1406) at > >> 0xbed6cfbc > >> <4>[ 349.061370] Process 2665(kkkkkkkkkkkkkkk) has RLIMIT_CORE set to 1 > >> <4>[ 349.067810] Aborting core > >> <0>[ 349.077362] Kernel panic - not syncing: Attempted to kill init! > >> Can you enable the L3 error debugging and see the crash log?? On your build this option should be available. It should point you to offending HW initiator/target. I still don't have a cleaned up version I could submit to LO Regards, Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
