Jean Pihet <jean.pihet@xxxxxxxxxxxxxx> writes: > Some bad interaction between the idle and the suspend paths has been > noticed: the idle code is called during the suspend enter and exit > sequences. This could cause corruption or lock-up of resources. > The solution is to move the call to disable_hlt at the very beginning > of the suspend sequence (in omap3_pm_begin instead of omap3_pm_prepare), > and the call to enable_hlt at the very end of the suspend sequence > (in omap3_pm_end instead of omap3_pm_finish). > > Tested with RET and OFF on Beagle and OMAP3EVM. I think the description could have a little more detail. Something like: Idle path should be disabled during the entire suspend/resume sequence. Currently it is disabled in ->prepare() and re-enabled in ->finish(), but the suspend sequence starts with ->begin() and ends with ->end(), leaving windows where the suspend/resume sequence is still underway and idle code could execute. To fix, move idle disable and enable into ->begin() and ->end() respectively to ensure idle path is disabled for the entire suspend/resume sequence. > > Signed-off-by: Jean Pihet <j-pihet@xxxxxx> > Cc: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> > --- > arch/arm/mach-omap2/pm34xx.c | 4 ++-- > 1 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c > index 75c0cd1..022fdff 100644 > --- a/arch/arm/mach-omap2/pm34xx.c > +++ b/arch/arm/mach-omap2/pm34xx.c > @@ -508,7 +508,6 @@ static suspend_state_t suspend_state; > > static int omap3_pm_prepare(void) > { > - disable_hlt(); > return 0; > } > > @@ -576,12 +575,12 @@ static int omap3_pm_enter(suspend_state_t unused) > > static void omap3_pm_finish(void) > { > - enable_hlt(); > } Might as well remove these empty functions now. > /* Hooks to enable / disable UART interrupts during suspend */ > static int omap3_pm_begin(suspend_state_t state) > { > + disable_hlt(); > suspend_state = state; > omap_uart_enable_irqs(0); > return 0; > @@ -591,6 +590,7 @@ static void omap3_pm_end(void) > { > suspend_state = PM_SUSPEND_ON; > omap_uart_enable_irqs(1); > + enable_hlt(); > return; > } Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html