On Mon, 2010-11-15 at 07:09 +0100, ext Samreen wrote: > This patch series adds the Display Support for OMAP3 platforms > and the corresponding changes in the board files. > > Version3: > - Rebase to the latest LO > Version2: > - Optimised to configure INTBR from gpio to PWM1 mode setting and > enabling of the PWM1 mode only when its not in PWM1 mode. > > Kishore Y (2): > OMAP3: ZOOM2/3/3630SDP: Add display board file for OMAP3 > OMAP3: Enable display on ZOOM2/3/3630SDP > > arch/arm/mach-omap2/Makefile | 3 + > arch/arm/mach-omap2/board-3630sdp.c | 1 + > arch/arm/mach-omap2/board-zoom-display.c | 168 +++++++++++++++++++++++++ > arch/arm/mach-omap2/board-zoom-peripherals.c | 49 +++++++- > arch/arm/mach-omap2/board-zoom2.c | 1 + > arch/arm/mach-omap2/board-zoom3.c | 1 + > arch/arm/mach-omap2/include/mach/board-zoom.h | 3 + > 7 files changed, 224 insertions(+), 2 deletions(-) > create mode 100644 arch/arm/mach-omap2/board-zoom-display.c Thanks, applied. Tomi -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html