On Mon, Nov 15, 2010 at 12:05 PM, Taneja, Archit <archit@xxxxxx> wrote: > Hi, > > bryan.wu@xxxxxxxxxxxxx wrote: >> On Wed, Nov 10, 2010 at 10:35 PM, Tomi Valkeinen > > [snip] > >>> >>> For both panel power on and off some panels require some sleep times: >>> when powering on, the video interface has to be enabled for some time >>> before the panel can be enabled, and similarly when powering off the >>> video interface needs to be on for some time after the panel has been >>> disabled. >>> >> >> Actually, in my previous version patches, I introduced >> .power_on_delay and .power_off_delay in panel_configs, which >> contains the sleep value for msleep(). But Archit told me >> this is not necessary, so I removed that. > > I had asked you to remove it from omap_dss_device to a more > specific struct for the generic dpi driver :) > Yeah, no problem. > It should be in the 'panel_generic_dpi_data' struct now. > I think the delay value is related to panel, which can be found in sharp_ls and sharp_lq drivers. So it might be in the "panel_configs" struct? Thanks, -Bryan -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
