On 11/12/2010 09:37 PM, Kevin Hilman wrote:
Gregory CLEMENT<gregory.clement@xxxxxxxxxxxxxxxxxx> writes:
When SPI wake up from OFF mode, CS is in the wrong state: force it to
the inactive state.
During the system life, I monitored the CS behavior using a
oscilloscope. I also activated debug in omap2_mcspi, so I saw when
driver disable the clocks and
Each time the CS was in the correct state.
It was only when system was put suspend to ram with off-mode activated
that on resume the CS was in wrong state( ie activated).
Signed-off-by: Gregory CLEMENT<gregory.clement@xxxxxxxxxxxxxxxxxx>
Lots of whitespace issues in this patch, please run through checkpatch.
Right, I forgot to use it this time.
---
drivers/spi/omap2_mcspi.c | 29 +++++++++++++++++++++++++++++
1 files changed, 29 insertions(+), 0 deletions(-)
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index 2a651e6..708990e 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -1305,11 +1305,40 @@ static int __exit omap2_mcspi_remove(struct
platform_device *pdev)
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:omap2_mcspi");
+#ifdef CONFIG_PM
+/* When SPI wake up, CS is in wrong state: force it to unactive state*/
This comment should be more specific that only this condition happens
only on off-mode wakeups
OK it will be added in the next version.
+static int omap2_mcspi_resume(struct platform_device *pdev)
+{
+ struct spi_master *master;
+ struct omap2_mcspi *mcspi;
+ struct omap2_mcspi_cs *cs;
+
+ master = dev_get_drvdata(&pdev->dev);
+ mcspi = spi_master_get_devdata(master);
+ omap2_mcspi_enable_clocks(master);
insert blank line here
+ /* We need to togle CS state for OMAP take this chang in account*/
+
remove blank line here
+ list_for_each_entry(cs,&omap2_mcspi_ctx[master->bus_num - 1].cs,
+ node)
+ {
this '{' belongs on like above
+ MOD_REG_BIT(cs->chconf0, OMAP2_MCSPI_CHCONF_FORCE, 1);
+ __raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
+ MOD_REG_BIT(cs->chconf0, OMAP2_MCSPI_CHCONF_FORCE, 0);
+ __raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
+ }
Rather than force the state to a hard-coded value, it seems better if
the driver instead restore the previous state, which could be saved
during suspend.
Well it would be surprising that driver was suspended in middle of a
transaction (CS in active state). But it is pretty easy to get this
information, so I will do this. It will be indeed cleaner.
+ omap2_mcspi_disable_clocks(master);
+ return 0;
+}
+#else
+#define omap2_mcspi_resume NULL
+#endif
+
static struct platform_driver omap2_mcspi_driver = {
.driver = {
.name = "omap2_mcspi",
.owner = THIS_MODULE,
},
+ .resume = omap2_mcspi_resume,
.remove = __exit_p(omap2_mcspi_remove),
};
-- 1.7.0.4
Kevin
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
