From: Andrei Emeltchenko <andrei.emeltchenko@xxxxxxxxx> Use definitions defined in serial_reg Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@xxxxxxxxx> --- arch/arm/plat-omap/include/plat/omap-serial.h | 3 --- drivers/serial/omap-serial.c | 6 +++--- 2 files changed, 3 insertions(+), 6 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index c8dae02..6a17880 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -31,9 +31,6 @@ */ #define OMAP_SERIAL_NAME "ttyO" -#define OMAP_MDR1_DISABLE 0x07 -#define OMAP_MDR1_MODE13X 0x03 -#define OMAP_MDR1_MODE16X 0x00 #define OMAP_MODE13X_SPEED 230400 /* diff --git a/drivers/serial/omap-serial.c b/drivers/serial/omap-serial.c index 14365f7..03a96db 100644 --- a/drivers/serial/omap-serial.c +++ b/drivers/serial/omap-serial.c @@ -753,7 +753,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, /* Protocol, Baud Rate, and Interrupt Settings */ - serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_DISABLE); + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB); up->efr = serial_in(up, UART_EFR); @@ -774,9 +774,9 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_out(up, UART_LCR, cval); if (baud > 230400 && baud != 3000000) - serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE13X); + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE); else - serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE16X); + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE); /* Hardware Flow Control Configuration */ -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
