Select the CBS package if SDP4430 is enabled during config.
Use the proper package (CBL or CBS) based on chip revision.
Signed-off-by: Benoit Cousson <b-cousson@xxxxxx>
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
Cc: Paul Walmsley <paul@xxxxxxxxx>
Cc: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
Cc: Anand Gadiyar <gadiyar@xxxxxx>
---
arch/arm/mach-omap2/Kconfig | 1 +
arch/arm/mach-omap2/board-4430sdp.c | 6 +++++-
2 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 92fea63..39229cf 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -284,6 +284,7 @@ config MACH_OMAP_4430SDP
default y
depends on ARCH_OMAP4
select OMAP_PACKAGE_CBL
+ select OMAP_PACKAGE_CBS
config MACH_OMAP4_PANDA
bool "OMAP4 Panda Board"
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index e4f1726..94d989b 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -517,8 +517,12 @@ static struct omap_board_mux board_mux[] __initdata = {
static void __init omap_4430sdp_init(void)
{
int status;
+ int package = OMAP_PACKAGE_CBS;
+
+ if (omap_rev() == OMAP4430_REV_ES1_0)
+ package = OMAP_PACKAGE_CBL;
+ omap4_mux_init(board_mux, package);
- omap4_mux_init(board_mux, OMAP_PACKAGE_CBL);
omap4_i2c_init();
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
