Still keep sharp_ls_panel, since the sharp_ls_panel driver contains blacklight
control driver code which will be moved out later. Then we can use generic DPI
driver for sharp_ls_panel.
Signed-off-by: Bryan Wu <bryan.wu@xxxxxxxxxxxxx>
---
arch/arm/mach-omap2/board-3430sdp.c | 13 +++++++++----
arch/arm/mach-omap2/board-am3517evm.c | 25 +++++++++++++++++--------
arch/arm/mach-omap2/board-cm-t35.c | 25 +++++++++++++++++--------
arch/arm/mach-omap2/board-devkit8000.c | 28 ++++++++++++++++++----------
arch/arm/mach-omap2/board-igep0020.c | 13 +++++++++----
arch/arm/mach-omap2/board-omap3beagle.c | 13 +++++++++----
arch/arm/mach-omap2/board-omap3evm.c | 13 +++++++++----
arch/arm/mach-omap2/board-omap3stalker.c | 25 +++++++++++++++++--------
8 files changed, 105 insertions(+), 50 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 4e3742c..4bafdd7 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -38,6 +38,7 @@
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
#include <plat/gpmc-smc91x.h>
@@ -270,13 +271,17 @@ static struct omap_dss_device sdp3430_lcd_device = {
.platform_disable = sdp3430_panel_disable_lcd,
};
+static struct panel_generic_dpi_data dvi_panel = {
+ .name = "generic",
+ .platform_enable = sdp3430_panel_enable_dvi,
+ .platform_disable = sdp3430_panel_disable_dvi,
+};
+
static struct omap_dss_device sdp3430_dvi_device = {
.name = "dvi",
- .driver_name = "generic_panel",
- .type = OMAP_DISPLAY_TYPE_DPI,
+ .driver_name = "generic_dpi_panel",
+ .data = &dvi_panel,
.phy.dpi.data_lines = 24,
- .platform_enable = sdp3430_panel_enable_dvi,
- .platform_disable = sdp3430_panel_disable_dvi,
};
static struct omap_dss_device sdp3430_tv_device = {
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 0739950..3534a23 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -35,6 +35,7 @@
#include <plat/common.h>
#include <plat/usb.h>
#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
#include "mux.h"
#include "control.h"
@@ -303,13 +304,17 @@ static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev)
lcd_enabled = 0;
}
+static struct panel_generic_dpi_data lcd_panel = {
+ .name = "sharp_lq",
+ .platform_enable = am3517_evm_panel_enable_lcd,
+ .platform_disable = am3517_evm_panel_disable_lcd,
+};
+
static struct omap_dss_device am3517_evm_lcd_device = {
- .type = OMAP_DISPLAY_TYPE_DPI,
.name = "lcd",
- .driver_name = "sharp_lq_panel",
+ .driver_name = "generic_dpi_panel",
+ .data = &lcd_panel,
.phy.dpi.data_lines = 16,
- .platform_enable = am3517_evm_panel_enable_lcd,
- .platform_disable = am3517_evm_panel_disable_lcd,
};
static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev)
@@ -346,13 +351,17 @@ static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
dvi_enabled = 0;
}
+static struct panel_generic_dpi_data dvi_panel = {
+ .name = "generic",
+ .platform_enable = am3517_evm_panel_enable_dvi,
+ .platform_disable = am3517_evm_panel_disable_dvi,
+};
+
static struct omap_dss_device am3517_evm_dvi_device = {
- .type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
- .driver_name = "generic_panel",
+ .driver_name = "generic_dpi_panel",
+ .data = &dvi_panel,
.phy.dpi.data_lines = 24,
- .platform_enable = am3517_evm_panel_enable_dvi,
- .platform_disable = am3517_evm_panel_disable_dvi,
};
static struct omap_dss_device *am3517_evm_dss_devices[] = {
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 63f764e..1a69d32 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -46,6 +46,7 @@
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
#include <plat/mcspi.h>
#include <mach/hardware.h>
@@ -351,22 +352,30 @@ static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev)
{
}
+static struct panel_generic_dpi_data lcd_panel = {
+ .name = "toppoly_tdo35s",
+ .platform_enable = cm_t35_panel_enable_lcd,
+ .platform_disable = cm_t35_panel_disable_lcd,
+};
+
static struct omap_dss_device cm_t35_lcd_device = {
.name = "lcd",
- .driver_name = "toppoly_tdo35s_panel",
- .type = OMAP_DISPLAY_TYPE_DPI,
+ .driver_name = "generic_dpi_panel",
+ .data = &lcd_panel,
.phy.dpi.data_lines = 18,
- .platform_enable = cm_t35_panel_enable_lcd,
- .platform_disable = cm_t35_panel_disable_lcd,
+};
+
+static struct panel_generic_dpi_data dvi_panel = {
+ .name = "generic",
+ .platform_enable = cm_t35_panel_enable_dvi,
+ .platform_disable = cm_t35_panel_disable_dvi,
};
static struct omap_dss_device cm_t35_dvi_device = {
.name = "dvi",
- .driver_name = "generic_panel",
- .type = OMAP_DISPLAY_TYPE_DPI,
+ .driver_name = "generic_dpi_panel",
+ .data = &dvi_panel,
.phy.dpi.data_lines = 24,
- .platform_enable = cm_t35_panel_enable_dvi,
- .platform_disable = cm_t35_panel_disable_dvi,
};
static struct omap_dss_device cm_t35_tv_device = {
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 067f437..d3ed32c 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -46,6 +46,7 @@
#include <plat/nand.h>
#include <plat/usb.h>
#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
#include <plat/mcspi.h>
#include <linux/input/matrix_keypad.h>
@@ -149,23 +150,30 @@ static struct regulator_consumer_supply devkit8000_vmmc1_supply =
static struct regulator_consumer_supply devkit8000_vio_supply =
REGULATOR_SUPPLY("vcc", "spi2.0");
+static struct panel_generic_dpi_data lcd_panel = {
+ .name = "generic",
+ .platform_enable = devkit8000_panel_enable_lcd,
+ .platform_disable = devkit8000_panel_disable_lcd,
+};
+
static struct omap_dss_device devkit8000_lcd_device = {
.name = "lcd",
- .driver_name = "generic_panel",
- .type = OMAP_DISPLAY_TYPE_DPI,
+ .driver_name = "generic_dpi_panel",
+ .data = &lcd_panel,
.phy.dpi.data_lines = 24,
- .reset_gpio = -EINVAL, /* will be replaced */
- .platform_enable = devkit8000_panel_enable_lcd,
- .platform_disable = devkit8000_panel_disable_lcd,
};
+
+static struct panel_generic_dpi_data dvi_panel = {
+ .name = "generic",
+ .platform_enable = devkit8000_panel_enable_dvi,
+ .platform_disable = devkit8000_panel_disable_dvi,
+};
+
static struct omap_dss_device devkit8000_dvi_device = {
.name = "dvi",
- .driver_name = "generic_panel",
- .type = OMAP_DISPLAY_TYPE_DPI,
+ .driver_name = "generic_dpi_panel",
+ .data = &dvi_panel,
.phy.dpi.data_lines = 24,
- .reset_gpio = -EINVAL, /* will be replaced */
- .platform_enable = devkit8000_panel_enable_dvi,
- .platform_disable = devkit8000_panel_disable_dvi,
};
static struct omap_dss_device devkit8000_tv_device = {
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 5e035a5..5d451e2 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -30,6 +30,7 @@
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
#include <plat/onenand.h>
#include "mux.h"
@@ -433,13 +434,17 @@ static void igep2_disable_dvi(struct omap_dss_device *dssdev)
gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0);
}
+static struct panel_generic_dpi_data dvi_panel = {
+ .name = "generic",
+ .platform_enable = igep2_enable_dvi,
+ .platform_disable = igep2_disable_dvi,
+};
+
static struct omap_dss_device igep2_dvi_device = {
- .type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
- .driver_name = "generic_panel",
+ .driver_name = "generic_dpi_panel",
+ .data = &dvi_panel,
.phy.dpi.data_lines = 24,
- .platform_enable = igep2_enable_dvi,
- .platform_disable = igep2_disable_dvi,
};
static struct omap_dss_device *igep2_dss_devices[] = {
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 14f4224..fe0bd0b 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -41,6 +41,7 @@
#include <plat/board.h>
#include <plat/common.h>
#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
@@ -194,14 +195,18 @@ static void beagle_disable_dvi(struct omap_dss_device *dssdev)
gpio_set_value(dssdev->reset_gpio, 0);
}
+static struct panel_generic_dpi_data dvi_panel = {
+ .name = "generic",
+ .platform_enable = beagle_enable_dvi,
+ .platform_disable = beagle_disable_dvi,
+};
+
static struct omap_dss_device beagle_dvi_device = {
- .type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
- .driver_name = "generic_panel",
+ .driver_name = "generic_dpi_panel",
+ .data = &dvi_panel,
.phy.dpi.data_lines = 24,
.reset_gpio = 170,
- .platform_enable = beagle_enable_dvi,
- .platform_disable = beagle_disable_dvi,
};
static struct omap_dss_device beagle_tv_device = {
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b04365c..a9c946c 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -43,6 +43,7 @@
#include <plat/common.h>
#include <plat/mcspi.h>
#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
@@ -301,13 +302,17 @@ static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
dvi_enabled = 0;
}
+static struct panel_generic_dpi_data dvi_panel = {
+ .name = "generic",
+ .platform_enable = omap3_evm_enable_dvi,
+ .platform_disable = omap3_evm_disable_dvi,
+};
+
static struct omap_dss_device omap3_evm_dvi_device = {
.name = "dvi",
- .driver_name = "generic_panel",
- .type = OMAP_DISPLAY_TYPE_DPI,
+ .driver_name = "generic_dpi_panel",
+ .data = &dvi_panel,
.phy.dpi.data_lines = 24,
- .platform_enable = omap3_evm_enable_dvi,
- .platform_disable = omap3_evm_disable_dvi,
};
static struct omap_dss_device *omap3_evm_dss_devices[] = {
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index f252721..3850bb4 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -40,6 +40,7 @@
#include <plat/nand.h>
#include <plat/usb.h>
#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
#include <plat/mcspi.h>
#include <linux/input/matrix_keypad.h>
@@ -160,13 +161,17 @@ static void omap3_stalker_disable_lcd(struct omap_dss_device *dssdev)
lcd_enabled = 0;
}
+static struct panel_generic_dpi_data lcd_panel = {
+ .name = "generic",
+ .platform_enable = omap3_stalker_enable_lcd,
+ .platform_disable = omap3_stalker_disable_lcd,
+};
+
static struct omap_dss_device omap3_stalker_lcd_device = {
.name = "lcd",
- .driver_name = "generic_panel",
+ .driver_name = "generic_dpi_panel",
+ .data = &lcd_panel,
.phy.dpi.data_lines = 24,
- .type = OMAP_DISPLAY_TYPE_DPI,
- .platform_enable = omap3_stalker_enable_lcd,
- .platform_disable = omap3_stalker_disable_lcd,
};
static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev)
@@ -208,13 +213,17 @@ static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev)
dvi_enabled = 0;
}
+static struct panel_generic_dpi_data dvi_panel = {
+ .name = "generic",
+ .platform_enable = omap3_stalker_enable_dvi,
+ .platform_disable = omap3_stalker_disable_dvi,
+};
+
static struct omap_dss_device omap3_stalker_dvi_device = {
.name = "dvi",
- .driver_name = "generic_panel",
- .type = OMAP_DISPLAY_TYPE_DPI,
+ .driver_name = "generic_dpi_panel",
+ .data = &dvi_panel,
.phy.dpi.data_lines = 24,
- .platform_enable = omap3_stalker_enable_dvi,
- .platform_disable = omap3_stalker_disable_dvi,
};
static struct omap_dss_device *omap3_stalker_dss_devices[] = {
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
