Introduce some fields in struct panel, which will be used to match the right
panel configurations in dummy driver.
Still keep sharp_ls_panel, since the sharp_ls_panel driver contains blacklight
control driver code which will be moved out later. Then we can use dummy driver
for sharp_ls_panel.
Signed-off-by: Bryan Wu <bryan.wu@xxxxxxxxxxxxx>
---
arch/arm/mach-omap2/board-3430sdp.c | 3 ++-
arch/arm/mach-omap2/board-am3517evm.c | 6 ++++--
arch/arm/mach-omap2/board-cm-t35.c | 6 ++++--
arch/arm/mach-omap2/board-devkit8000.c | 6 ++++--
arch/arm/mach-omap2/board-igep0020.c | 3 ++-
arch/arm/mach-omap2/board-omap3beagle.c | 3 ++-
arch/arm/mach-omap2/board-omap3evm.c | 3 ++-
arch/arm/mach-omap2/board-omap3stalker.c | 6 ++++--
arch/arm/plat-omap/include/plat/display.h | 28 +++++++++++++++++++---------
9 files changed, 43 insertions(+), 21 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 4e3742c..0e4598d 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -272,7 +272,8 @@ static struct omap_dss_device sdp3430_lcd_device = {
static struct omap_dss_device sdp3430_dvi_device = {
.name = "dvi",
- .driver_name = "generic_panel",
+ .driver_name = "dummy_panel",
+ .panel.name = "generic",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
.platform_enable = sdp3430_panel_enable_dvi,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 0739950..88c9b76 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -306,7 +306,8 @@ static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev)
static struct omap_dss_device am3517_evm_lcd_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "lcd",
- .driver_name = "sharp_lq_panel",
+ .driver_name = "dummy_panel",
+ .panel.name = "sharp_lq",
.phy.dpi.data_lines = 16,
.platform_enable = am3517_evm_panel_enable_lcd,
.platform_disable = am3517_evm_panel_disable_lcd,
@@ -349,7 +350,8 @@ static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
static struct omap_dss_device am3517_evm_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
- .driver_name = "generic_panel",
+ .driver_name = "dummy_panel",
+ .panel.name = "generic",
.phy.dpi.data_lines = 24,
.platform_enable = am3517_evm_panel_enable_dvi,
.platform_disable = am3517_evm_panel_disable_dvi,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 63f764e..a0c555d 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -353,7 +353,8 @@ static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev)
static struct omap_dss_device cm_t35_lcd_device = {
.name = "lcd",
- .driver_name = "toppoly_tdo35s_panel",
+ .driver_name = "dummy_panel",
+ .panel.name = "toppoly_tdo35s",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 18,
.platform_enable = cm_t35_panel_enable_lcd,
@@ -362,7 +363,8 @@ static struct omap_dss_device cm_t35_lcd_device = {
static struct omap_dss_device cm_t35_dvi_device = {
.name = "dvi",
- .driver_name = "generic_panel",
+ .driver_name = "dummy_panel",
+ .panel.name = "generic",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
.platform_enable = cm_t35_panel_enable_dvi,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 067f437..ce5be9c 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -151,7 +151,8 @@ static struct regulator_consumer_supply devkit8000_vio_supply =
static struct omap_dss_device devkit8000_lcd_device = {
.name = "lcd",
- .driver_name = "generic_panel",
+ .driver_name = "dummy_panel",
+ .panel.name = "generic",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
.reset_gpio = -EINVAL, /* will be replaced */
@@ -160,7 +161,8 @@ static struct omap_dss_device devkit8000_lcd_device = {
};
static struct omap_dss_device devkit8000_dvi_device = {
.name = "dvi",
- .driver_name = "generic_panel",
+ .driver_name = "dummy_panel",
+ .panel.name = "generic",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
.reset_gpio = -EINVAL, /* will be replaced */
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 5e035a5..f9a3d03 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -436,7 +436,8 @@ static void igep2_disable_dvi(struct omap_dss_device *dssdev)
static struct omap_dss_device igep2_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
- .driver_name = "generic_panel",
+ .driver_name = "dummy_panel",
+ .panel.name = "generic",
.phy.dpi.data_lines = 24,
.platform_enable = igep2_enable_dvi,
.platform_disable = igep2_disable_dvi,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 14f4224..11592bf 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -197,7 +197,8 @@ static void beagle_disable_dvi(struct omap_dss_device *dssdev)
static struct omap_dss_device beagle_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
- .driver_name = "generic_panel",
+ .driver_name = "dummy_panel",
+ .panel.name = "generic",
.phy.dpi.data_lines = 24,
.reset_gpio = 170,
.platform_enable = beagle_enable_dvi,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b04365c..b7ff779 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -303,7 +303,8 @@ static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
static struct omap_dss_device omap3_evm_dvi_device = {
.name = "dvi",
- .driver_name = "generic_panel",
+ .driver_name = "dummy_panel",
+ .panel.name = "generic",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
.platform_enable = omap3_evm_enable_dvi,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index f252721..19a8fd8 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -162,7 +162,8 @@ static void omap3_stalker_disable_lcd(struct omap_dss_device *dssdev)
static struct omap_dss_device omap3_stalker_lcd_device = {
.name = "lcd",
- .driver_name = "generic_panel",
+ .driver_name = "dummy_panel",
+ .panel.name = "generic",
.phy.dpi.data_lines = 24,
.type = OMAP_DISPLAY_TYPE_DPI,
.platform_enable = omap3_stalker_enable_lcd,
@@ -210,7 +211,8 @@ static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev)
static struct omap_dss_device omap3_stalker_dvi_device = {
.name = "dvi",
- .driver_name = "generic_panel",
+ .driver_name = "dummy_panel",
+ .panel.name = "generic",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
.platform_enable = omap3_stalker_enable_dvi,
diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h
index c915a66..a49c458 100644
--- a/arch/arm/plat-omap/include/plat/display.h
+++ b/arch/arm/plat-omap/include/plat/display.h
@@ -346,6 +346,24 @@ struct omap_overlay_manager {
int (*disable)(struct omap_overlay_manager *mgr);
};
+struct omap_display_panel {
+ struct omap_video_timings timings;
+
+ int acbi; /* ac-bias pin transitions per interrupt */
+ /* Unit: line clocks */
+ int acb; /* ac-bias pin frequency */
+
+ enum omap_panel_config config;
+
+ int power_on_delay;
+ int power_off_delay;
+ /*
+ * Used to match device to panel configuration
+ * when use dummy panel driver
+ */
+ const char *name;
+};
+
struct omap_dss_device {
struct device dev;
@@ -395,15 +413,7 @@ struct omap_dss_device {
} venc;
} phy;
- struct {
- struct omap_video_timings timings;
-
- int acbi; /* ac-bias pin transitions per interrupt */
- /* Unit: line clocks */
- int acb; /* ac-bias pin frequency */
-
- enum omap_panel_config config;
- } panel;
+ struct omap_display_panel panel;
struct {
u8 pixel_size;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
