In OMAP3, for perfomrance reasons when VDD1 is at voltage above
1.075V, VDD2 should be at 1.15V for perfomrance reasons. This
patch introduce this cross VDD dependency for OMAP3 VDD1.
Signed-off-by: Thara Gopinath <thara@xxxxxx>
---
arch/arm/mach-omap2/voltage.c | 19 +++++++++++++++++++
1 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 6f85f75..241fac5 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -350,6 +350,23 @@ static struct omap_volt_data omap44xx_vdd_core_volt_data[] = {
{.volt_nominal = 1100000, .sr_errminlimit = 0xF9, .vp_errgain = 0x16},
};
+/* OMAP 3430 MPU Core VDD dependency table */
+static struct omap_vdd_dep_volt omap34xx_vdd1_vdd2_data[] = {
+ {.main_vdd_volt = 975000, .dep_vdd_volt = 1050000},
+ {.main_vdd_volt = 1075000, .dep_vdd_volt = 1050000},
+ {.main_vdd_volt = 1200000, .dep_vdd_volt = 1150000},
+ {.main_vdd_volt = 1270000, .dep_vdd_volt = 1150000},
+ {.main_vdd_volt = 1350000, .dep_vdd_volt = 1150000},
+ {.main_vdd_volt = 0, .dep_vdd_volt = 0},
+};
+
+static struct omap_vdd_dep_info omap34xx_vdd1_dep_info[] = {
+ {
+ .name = "core",
+ .dep_table = omap34xx_vdd1_vdd2_data,
+ },
+};
+
/* By default VPFORCEUPDATE is the chosen method of voltage scaling */
static bool voltscale_vpforceupdate = true;
@@ -574,6 +591,8 @@ static void __init omap3_vdd_data_configure(struct omap_vdd_info *vdd)
vdd->volt_data = omap34xx_vdd1_volt_data;
vdd->volt_data_count =
ARRAY_SIZE(omap34xx_vdd1_volt_data);
+ vdd->dep_vdd_info = omap34xx_vdd1_dep_info;
+ vdd->nr_dep_vdd = ARRAY_SIZE(omap34xx_vdd1_dep_info);
}
vdd->vp_reg.tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK;
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
