[PATCH v2] OMAP: DSS2: Add NEC NL8048HL11-01B display panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Erik Gilling <konkers@xxxxxxxxxxx>

NEC WVGA LCD NL8048HL11-01B panel support has been added.
This panel is being used in zoom2/zoom3/3630 sdp boards.

Signed-off-by: Mukund Mittal <mmittal@xxxxxx>
Signed-off-by: Rajkumar N <rajkumar.nagarajan@xxxxxx>
Signed-off-by: Samreen <samreen@xxxxxx>
CC: Subbu Venkatesh <subramani.venkatesh@xxxxxxxxxxxxx>
CC: Erik Gilling <konkers@xxxxxxxxxxx>
---
 Version2:
    - the brightness updation is removed from the nec_8048_panel_enable()
    to assure the user set brightness value is not over written
    - error checking added where ever missing
    - cosmetic changes are also included

 This panel driver has orginated from panel-zoom2 from the L25.x 
 releases.Refer Commit:
 http://git.omapzoom.org/?p=kernel/omap.git;a=commit;h=75fc121865125d9e3ca3b36f1f19f86b394e1f6b

 drivers/video/omap2/displays/Kconfig               |    7 +
 drivers/video/omap2/displays/Makefile              |    1 +
 .../omap2/displays/panel-nec-nl8048hl11-01b.c      |  379 ++++++++++++++++++++
 3 files changed, 387 insertions(+), 0 deletions(-)
 create mode 100644 drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c

diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
index 12327bb..f8152cf 100644
--- a/drivers/video/omap2/displays/Kconfig
+++ b/drivers/video/omap2/displays/Kconfig
@@ -20,6 +20,13 @@ config PANEL_SHARP_LQ043T1DG01
         help
           LCD Panel used in TI's OMAP3517 EVM boards
 
+config PANEL_NEC_NL8048HL11_01B
+	tristate "NEC NL8048HL11-01B Panel"
+	depends on OMAP2_DSS
+	help
+		This NEC NL8048HL11-01B panel is TFT LCD
+		used in the Zoom2/3/3630 sdp boards.
+
 config PANEL_TAAL
         tristate "Taal DSI Panel"
         depends on OMAP2_DSS_DSI
diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
index aa38609..8ece91c 100644
--- a/drivers/video/omap2/displays/Makefile
+++ b/drivers/video/omap2/displays/Makefile
@@ -1,6 +1,7 @@
 obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
 obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
 obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel-sharp-lq043t1dg01.o
+obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += panel-nec-nl8048hl11-01b.o
 
 obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
 obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o
diff --git a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
new file mode 100644
index 0000000..0327731
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
@@ -0,0 +1,379 @@
+/*
+ * Support for NEC-nl8048hl11-01b panel driver
+ *
+ * Copyright (C) 2010 Texas Instruments Inc.
+ * Author: Erik Gilling <konkers@xxxxxxxxxxx>
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+
+#include <plat/display.h>
+
+#define LCD_XRES		800
+#define LCD_YRES		480
+/*
+ * NEC PIX Clock Ratings
+ * MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz
+ */
+#define LCD_PIXEL_CLOCK		23800
+
+struct nec_8048_data {
+	struct backlight_device *bl;
+};
+
+/*
+ * NEC NL8048HL11-01B  Manual
+ * defines HFB, HSW, HBP, VFP, VSW, VBP as shown below
+ */
+
+static struct omap_video_timings nec_8048_panel_timings = {
+	/* 800 x 480 @ 60 Hz  Reduced blanking VESA CVT 0.31M3-R */
+	.x_res		= LCD_XRES,
+	.y_res		= LCD_YRES,
+	.pixel_clock	= LCD_PIXEL_CLOCK,
+	.hfp		= 6,
+	.hsw		= 1,
+	.hbp		= 4,
+	.vfp		= 3,
+	.vsw		= 1,
+	.vbp		= 4,
+};
+
+static int nec_8048_bl_update_status(struct backlight_device *bl)
+{
+	struct omap_dss_device *dssdev = dev_get_drvdata(&bl->dev);
+	int level;
+
+	if (!dssdev->set_backlight)
+		return -EINVAL;
+
+	if (bl->props.fb_blank == FB_BLANK_UNBLANK &&
+			bl->props.power == FB_BLANK_UNBLANK)
+		level = bl->props.brightness;
+	else
+		level = 0;
+
+	return dssdev->set_backlight(dssdev, level);
+}
+
+static int nec_8048_bl_get_brightness(struct backlight_device *bl)
+{
+	if (bl->props.fb_blank == FB_BLANK_UNBLANK &&
+			bl->props.power == FB_BLANK_UNBLANK)
+		return bl->props.brightness;
+
+	return 0;
+}
+
+static const struct backlight_ops nec_8048_bl_ops = {
+	.get_brightness	= nec_8048_bl_get_brightness,
+	.update_status	= nec_8048_bl_update_status,
+};
+
+static int nec_8048_panel_probe(struct omap_dss_device *dssdev)
+{
+	struct backlight_device *bl;
+	struct nec_8048_data *necd;
+	struct backlight_properties props;
+	int r;
+
+	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+				OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_RF |
+				OMAP_DSS_LCD_ONOFF;
+	dssdev->panel.timings = nec_8048_panel_timings;
+
+	necd = kzalloc(sizeof(*necd), GFP_KERNEL);
+	if (!necd)
+		return -ENOMEM;
+
+	dev_set_drvdata(&dssdev->dev, necd);
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 255;
+
+	bl = backlight_device_register("nec-8048", &dssdev->dev, dssdev,
+			&nec_8048_bl_ops, &props);
+	if (IS_ERR(bl)) {
+		r = PTR_ERR(bl);
+		kfree(necd);
+		return r;
+	}
+	necd->bl = bl;
+
+	bl->props.fb_blank = FB_BLANK_UNBLANK;
+	bl->props.power = FB_BLANK_UNBLANK;
+	bl->props.max_brightness = dssdev->max_backlight_level;
+	bl->props.brightness = dssdev->max_backlight_level;
+
+	r = nec_8048_bl_update_status(bl);
+	if (r < 0)
+		dev_err(&dssdev->dev, "failed to set lcd brightness\n");
+
+	return 0;
+}
+
+static void nec_8048_panel_remove(struct omap_dss_device *dssdev)
+{
+	struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev);
+	struct backlight_device *bl = necd->bl;
+
+	bl->props.power = FB_BLANK_POWERDOWN;
+	nec_8048_bl_update_status(bl);
+	backlight_device_unregister(bl);
+
+	kfree(necd);
+}
+
+static int nec_8048_panel_enable(struct omap_dss_device *dssdev)
+{
+	int r = 0;
+	struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev);
+	struct backlight_device *bl = necd->bl;
+
+	if (dssdev->platform_enable) {
+		r = dssdev->platform_enable(dssdev);
+		if (r)
+			return r;
+	}
+
+	r = nec_8048_bl_update_status(bl);
+	if (r < 0)
+		dev_err(&dssdev->dev, "failed to set lcd brightness\n");
+
+	r = omapdss_dpi_display_enable(dssdev);
+
+	return r;
+}
+
+static void nec_8048_panel_disable(struct omap_dss_device *dssdev)
+{
+	struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev);
+	struct backlight_device *bl = necd->bl;
+
+	omapdss_dpi_display_disable(dssdev);
+
+	bl->props.brightness = 0;
+	nec_8048_bl_update_status(bl);
+
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+}
+
+static int nec_8048_panel_suspend(struct omap_dss_device *dssdev)
+{
+	nec_8048_panel_disable(dssdev);
+	return 0;
+}
+
+static int nec_8048_panel_resume(struct omap_dss_device *dssdev)
+{
+	return nec_8048_panel_enable(dssdev);
+}
+
+static int nec_8048_recommended_bpp(struct omap_dss_device *dssdev)
+{
+	return 16;
+}
+
+static struct omap_dss_driver nec_8048_driver = {
+	.probe			= nec_8048_panel_probe,
+	.remove			= nec_8048_panel_remove,
+	.enable			= nec_8048_panel_enable,
+	.disable		= nec_8048_panel_disable,
+	.suspend		= nec_8048_panel_suspend,
+	.resume			= nec_8048_panel_resume,
+	.get_recommended_bpp	= nec_8048_recommended_bpp,
+
+	.driver		= {
+		.name		= "NEC_8048_panel",
+		.owner		= THIS_MODULE,
+	},
+};
+
+static int spi_send(struct spi_device *spi, unsigned char reg_addr,
+			unsigned char reg_data)
+{
+	int ret = 0;
+	unsigned int cmd = 0, data = 0;
+
+	cmd = 0x0000 | reg_addr; /* register address write */
+	data = 0x0100 | reg_data ; /* register data write */
+	data = (cmd << 16) | data;
+
+	ret = spi_write(spi, (unsigned char *)&data, 4);
+	if (ret)
+		pr_err("error in spi_write %x\n", data);
+
+	return ret;
+}
+
+
+static int init_nec_8048_wvga_lcd(struct spi_device *spi)
+{
+	/* Initialization Sequence */
+	/* spi_send(spi, REG, VAL) */
+	spi_send(spi, 3, 0x01);
+	spi_send(spi, 0, 0x00);
+	spi_send(spi, 1, 0x01);    /* R1 = 0x01 (normal), 0x03 (reversed) */
+	spi_send(spi, 4, 0x00);
+	spi_send(spi, 5, 0x14);
+	spi_send(spi, 6, 0x24);
+	spi_send(spi, 16, 0xD7);
+	spi_send(spi, 17, 0x00);
+	spi_send(spi, 18, 0x00);
+	spi_send(spi, 19, 0x55);
+	spi_send(spi, 20, 0x01);
+	spi_send(spi, 21, 0x70);
+	spi_send(spi, 22, 0x1E);
+	spi_send(spi, 23, 0x25);
+	spi_send(spi, 24, 0x25);
+	spi_send(spi, 25, 0x02);
+	spi_send(spi, 26, 0x02);
+	spi_send(spi, 27, 0xA0);
+	spi_send(spi, 32, 0x2F);
+	spi_send(spi, 33, 0x0F);
+	spi_send(spi, 34, 0x0F);
+	spi_send(spi, 35, 0x0F);
+	spi_send(spi, 36, 0x0F);
+	spi_send(spi, 37, 0x0F);
+	spi_send(spi, 38, 0x0F);
+	spi_send(spi, 39, 0x00);
+	spi_send(spi, 40, 0x02);
+	spi_send(spi, 41, 0x02);
+	spi_send(spi, 42, 0x02);
+	spi_send(spi, 43, 0x0F);
+	spi_send(spi, 44, 0x0F);
+	spi_send(spi, 45, 0x0F);
+	spi_send(spi, 46, 0x0F);
+	spi_send(spi, 47, 0x0F);
+	spi_send(spi, 48, 0x0F);
+	spi_send(spi, 49, 0x0F);
+	spi_send(spi, 50, 0x00);
+	spi_send(spi, 51, 0x02);
+	spi_send(spi, 52, 0x02);
+	spi_send(spi, 53, 0x02);
+	spi_send(spi, 80, 0x0C);
+	spi_send(spi, 83, 0x42);
+	spi_send(spi, 84, 0x42);
+	spi_send(spi, 85, 0x41);
+	spi_send(spi, 86, 0x14);
+	spi_send(spi, 89, 0x88);
+	spi_send(spi, 90, 0x01);
+	spi_send(spi, 91, 0x00);
+	spi_send(spi, 92, 0x02);
+	spi_send(spi, 93, 0x0C);
+	spi_send(spi, 94, 0x1C);
+	spi_send(spi, 95, 0x27);
+	spi_send(spi, 98, 0x49);
+	spi_send(spi, 99, 0x27);
+	spi_send(spi, 102, 0x76);
+	spi_send(spi, 103, 0x27);
+	spi_send(spi, 112, 0x01);
+	spi_send(spi, 113, 0x0E);
+	spi_send(spi, 114, 0x02);
+	spi_send(spi, 115, 0x0C);
+	spi_send(spi, 118, 0x0C);
+	spi_send(spi, 121, 0x30); /* R121 = 0x30 (normal), 0x10 (reversed) */
+	spi_send(spi, 130, 0x00);
+	spi_send(spi, 131, 0x00);
+	spi_send(spi, 132, 0xFC);
+	spi_send(spi, 134, 0x00);
+	spi_send(spi, 136, 0x00);
+	spi_send(spi, 138, 0x00);
+	spi_send(spi, 139, 0x00);
+	spi_send(spi, 140, 0x00);
+	spi_send(spi, 141, 0xFC);
+	spi_send(spi, 143, 0x00);
+	spi_send(spi, 145, 0x00);
+	spi_send(spi, 147, 0x00);
+	spi_send(spi, 148, 0x00);
+	spi_send(spi, 149, 0x00);
+	spi_send(spi, 150, 0xFC);
+	spi_send(spi, 152, 0x00);
+	spi_send(spi, 154, 0x00);
+	spi_send(spi, 156, 0x00);
+	spi_send(spi, 157, 0x00);
+	udelay(20);
+	spi_send(spi, 2, 0x00);
+
+	return 0;
+}
+
+static int nec_8048_spi_probe(struct spi_device *spi)
+{
+	spi->mode = SPI_MODE_0;
+	spi->bits_per_word = 32;
+	spi_setup(spi);
+
+	init_nec_8048_wvga_lcd(spi);
+
+	return omap_dss_register_driver(&nec_8048_driver);
+}
+
+static int nec_8048_spi_remove(struct spi_device *spi)
+{
+	omap_dss_unregister_driver(&nec_8048_driver);
+
+	return 0;
+}
+
+static int nec_8048_spi_suspend(struct spi_device *spi, pm_message_t mesg)
+{
+	spi_send(spi, 2, 0x01);
+	mdelay(40);
+
+	return 0;
+}
+
+static int nec_8048_spi_resume(struct spi_device *spi)
+{
+	/* reinitialize the panel */
+	spi_setup(spi);
+	spi_send(spi, 2, 0x00);
+	init_nec_8048_wvga_lcd(spi);
+
+	return 0;
+}
+
+static struct spi_driver nec_8048_spi_driver = {
+	.probe		= nec_8048_spi_probe,
+	.remove		= __devexit_p(nec_8048_spi_remove),
+	.suspend	= nec_8048_spi_suspend,
+	.resume		= nec_8048_spi_resume,
+	.driver		= {
+		.name	= "nec_8048_spi",
+		.bus	= &spi_bus_type,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init nec_8048_lcd_init(void)
+{
+	return spi_register_driver(&nec_8048_spi_driver);
+}
+
+static void __exit nec_8048_lcd_exit(void)
+{
+	return spi_unregister_driver(&nec_8048_spi_driver);
+}
+
+module_init(nec_8048_lcd_init);
+module_exit(nec_8048_lcd_exit);
+MODULE_AUTHOR("Erik Gilling <konkers@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("Nec Driver");
+MODULE_LICENSE("GPL");
-- 
1.5.6.3

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux