> -----Original Message----- > From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap- > owner@xxxxxxxxxxxxxxx] On Behalf Of Robert Nelson > Sent: Wednesday, October 20, 2010 6:33 PM > To: Steve Sakoman > Cc: linux-omap@xxxxxxxxxxxxxxx > Subject: Re: DSS2 crash with shutdown -h now > > On Wed, Oct 20, 2010 at 7:44 AM, Steve Sakoman <sakoman@xxxxxxxxx> wrote: > > On Tue, Oct 19, 2010 at 9:42 PM, Taneja, Archit <archit@xxxxxx> wrote: > >> Hi, > >> > >> linux-omap-owner@xxxxxxxxxxxxxxx wrote: > >>> I'm using a 2.6.35 kernel, and the generic panel driver. > >>> > >>> I see this crash about 25% of the time, so I suspect a race condition. > >>> > >>> Is anyone else encountering this? > >>> > >>> Steve > >>> > >>> > >>> Unmounting local filesystems... > >>> Unhandled fault: external abort on non-linefetch (0x1028) at > >>> 0xfa050040 Internal error: : 1028 [#1] last sysfs file: > >>> /sys/devices/virtual/vc/vcs12/uevent > >>> Modules linked in: ipv6 uvcvideo videodev v4l1_compat ads7846 > >>> CPU: 0 Not tainted (2.6.35 #1) > >>> PC is at dss_select_dispc_clk_source+0x20/0x40 > >>> LR is at omapdss_dpi_display_disable+0x20/0x50 > >>> pc : [<c01f74d4>] lr : [<c01ffc80>] psr: 60000013 > >>> sp : ded59e38 ip : 00000090 fp : 00000001 > >>> r10: 00000001 r9 : ded58000 r8 : c0032084 > >>> r7 : ded59e50 r6 : 00000000 r5 : c01fcc28 r4 : c057da00 > >>> r3 : 00000000 r2 : fa050000 r1 : c05d062c r0 : 00000002 > >>> Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user > >>> Control: 10c5387d Table: 9ed84019 DAC: 00000015 Process > >>> halt (pid: 503, stack limit = 0xded582f0) > >>> Stack: (0xded59e38 to 0xded5a000) > >>> 9e20: > >>> c057da00 c020a430 > >>> 9e40: 00000000 c01fcc48 ded59e50 c022f424 dfc3fc78 dfccc170 > >>> dfe02400 c057d4cc > >>> 9e60: c057d4c0 c05d4fac 00000000 c0230ba4 c0575de0 c022c6f8 28121969 > cdef0123 > >>> 9e80: fee1dead c0065d58 28121969 c0065ed4 00000014 dfc17dd8 00000001 > dfc299c0 > >>> 9ea0: 00000000 ded59eb0 c0062ee4 c00546f0 000a4800 a0000013 00000000 > ded59f08 > >>> 9ec0: 00000001 00000014 ded58000 00000001 00000001 c0063068 00000000 > ded59f08 > >>> 9ee0: dfc299c0 dfc18500 ded59f08 00000014 ded58000 c0063cb8 00000001 > 00000000 > >>> 9f00: 00000006 c0063d2c 00000014 00000164 00000000 000001f7 00000000 > dfc299f8 > >>> 9f20: 00000164 dfc299f0 c057f598 00000000 00000000 fffffffd 00000000 > c006e810 > >>> 9f40: ded59f6c 00000000 dfc299c0 c0052fbc dfc299c0 dff16e00 > >>> dec41080 dec92540 > >>> 9f60: ded59fac ded59f70 c03e841c c0052f90 ffffff9c c0031f58 > >>> dec927a8 ded58000 > >>> 9f80: 00000000 00000000 00000000 00000006 00000025 00000000 00000000 > 00000006 > >>> 9fa0: 00000058 c0031f00 00000000 00000000 fee1dead 28121969 4321fedc > 00000000 > >>> 9fc0: 00000000 00000000 00000006 00000058 00000001 00000001 00000001 > 00000001 > >>> 9fe0: 00011e50 bef36cb0 0000925c 400e23f8 20000010 fee1dead > >>> 00000000 00000000 [<c01f74d4>] > >>> (dss_select_dispc_clk_source+0x20/0x40) from [<c01ffc80>] > >>> (omapdss_dpi_display_disable+0x20/0x50) > >>> [<c01ffc80>] (omapdss_dpi_display_disable+0x20/0x50) from [<c020a430>] > >>> (generic_panel_disable+0xc/0x18) > >>> [<c020a430>] (generic_panel_disable+0xc/0x18) from [<c01fcc48>] > >>> (dss_disable_device+0x20/0x2c) > >>> [<c01fcc48>] (dss_disable_device+0x20/0x2c) from [<c022f424>] > >>> (bus_for_each_dev+0x4c/0x8c) [<c022f424>] (bus_for_each_dev+0x4c/0x8c) > from > >>> [<c0230ba4>] (platform_drv_shutdown+0x1c/0x24) > >>> [<c0230ba4>] (platform_drv_shutdown+0x1c/0x24) from [<c022c6f8>] > >>> (device_shutdown+0x70/0x94) [<c022c6f8>] (device_shutdown+0x70/0x94) > from > >>> [<c0065d58>] (kernel_halt+0x10/0x2c) [<c0065d58>] > (kernel_halt+0x10/0x2c) > >>> from [<c0065ed4>] (sys_reboot+0x118/0x1dc) [<c0065ed4>] > >>> (sys_reboot+0x118/0x1dc) from [<c0031f00>] > >>> (ret_fast_syscall+0x0/0x30) > >>> Code: e5833000 eafffffd e59f101c e5912000 (e5923040) > >>> OMAPFB: pan_display(0) > >>> OMAPFB: setcmap > >>> OMAPFB: setcmap > >>> OMAPFB: setcmap > >> > >> Are you running a fb app while shutting down? > > > > My test method is to use a relatively minimal rootfs. It does launch > > a console session on the fb using a USB KB on musb, which sits at the > > login prompt throughout the test. I do not login via this console > > session. > > > > I login via serial port, wait till uptime reports 10 minutes, then > > issue 'shutdown -h now' > > Hi Steve > 10 minutes? > > Sounds very much like: http://www.spinics.net/lists/linux- > omap/msg34582.html > Yes, I also think that this patch would solve the issue. Steve, If you wish to disable display auto blanking, you can add this in your bootargs: consoleblank=0 With that the crash would not be seen. http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=blob;f=Documentation/kernel-parameters.txt -Thanks, Mayuresh > *there might be a newer patch, that's just the one i had marked on my > list.. > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
