The defconfig options for display are taken in the respective Kconfig
to enable display by default on OMAP3 platforms
Signed-off-by: Samreen <samreen@xxxxxx>
---
Version3:
Eliminate the separate default number of FBs for
different architecture. Keeping default FBs as 3 as before.
Version2:
Enables by default NEC panel used in zoom2/3/3630sdp, instead of
Sharp LQ043T1DG01 panel enabled in previous version of this patch
drivers/video/omap2/displays/Kconfig | 3 +++
drivers/video/omap2/dss/Kconfig | 6 ++++--
drivers/video/omap2/omapfb/Kconfig | 1 +
3 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
index f8152cf..d818e44 100644
--- a/drivers/video/omap2/displays/Kconfig
+++ b/drivers/video/omap2/displays/Kconfig
@@ -3,6 +3,7 @@ menu "OMAP2/3 Display Device Drivers"
config PANEL_GENERIC
tristate "Generic Panel"
+ default y
help
Generic panel driver.
Used for DVI output for Beagle and OMAP3 SDP.
@@ -10,6 +11,7 @@ config PANEL_GENERIC
config PANEL_SHARP_LS037V7DW01
tristate "Sharp LS037V7DW01 LCD Panel"
depends on OMAP2_DSS
+ default y
select BACKLIGHT_CLASS_DEVICE
help
LCD Panel used in TI's SDP3430 and EVM boards
@@ -23,6 +25,7 @@ config PANEL_SHARP_LQ043T1DG01
config PANEL_NEC_NL8048HL11_01B
tristate "NEC NL8048HL11-01B Panel"
depends on OMAP2_DSS
+ default y
help
This NEC NL8048HL11-01B panel is TFT LCD
used in the Zoom2/3/3630 sdp boards.
diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig
index 43b6440..f3244a2 100644
--- a/drivers/video/omap2/dss/Kconfig
+++ b/drivers/video/omap2/dss/Kconfig
@@ -1,6 +1,7 @@
menuconfig OMAP2_DSS
tristate "OMAP2/3 Display Subsystem support (EXPERIMENTAL)"
depends on ARCH_OMAP2 || ARCH_OMAP3
+ default y
help
OMAP2/3 Display Subsystem support.
@@ -9,7 +10,7 @@ if OMAP2_DSS
config OMAP2_VRAM_SIZE
int "VRAM size (MB)"
range 0 32
- default 0
+ default 4
help
The amount of SDRAM to reserve at boot time for video RAM use.
This VRAM will be used by omapfb and other drivers that need
@@ -102,7 +103,8 @@ config OMAP2_DSS_FAKE_VSYNC
config OMAP2_DSS_MIN_FCK_PER_PCK
int "Minimum FCK/PCK ratio (for scaling)"
range 0 32
- default 0
+ default 4 if ARCH_OMAP2 || ARCH_OMAP3
+ default 0 if ARCH_OMAP4
help
This can be used to adjust the minimum FCK/PCK ratio.
diff --git a/drivers/video/omap2/omapfb/Kconfig b/drivers/video/omap2/omapfb/Kconfig
index 65149b2..923bf48 100644
--- a/drivers/video/omap2/omapfb/Kconfig
+++ b/drivers/video/omap2/omapfb/Kconfig
@@ -1,6 +1,7 @@
menuconfig FB_OMAP2
tristate "OMAP2/3 frame buffer support (EXPERIMENTAL)"
depends on FB && OMAP2_DSS
+ default y
select OMAP2_VRAM
select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3
--
1.5.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
