For MMC1 Controller, card detect interrupt source is twl6030 which is non-gpio. The card detect call back function provides card present/absent status by reading MMC Control register present on twl6030. This functionality was introduced in mfd tree on track to kernel.org Sync pandaboard to the same and make mmc work. Cc: Tony Lindgren <tony@xxxxxxxxxxx> Cc: Madhusudhan Chikkature <madhu.cr@xxxxxx> Cc: Adrian Hunter <adrian.hunter@xxxxxxxxx> Cc: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx> Acked-by: Kishore Kadiyala <kishore.kadiyala@xxxxxx> Signed-off-by: Nishanth Menon <nm@xxxxxx> --- Depends on http://git.kernel.org/?p=linux/kernel/git/sameo/mfd-2.6.git;a=commitdiff;h=1bf5197061a4aec99e9fd4f92d4a543310f83585;hp=0c9b33e5a23e2053165c9e30ffff3b3a3cf1b2b8 This patch probably should be squashed to that. arch/arm/mach-omap2/board-omap4panda.c | 15 ++++++++++++--- 1 files changed, 12 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index a9d8a19..47cc8d2 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -160,10 +160,19 @@ static int omap4_twl6030_hsmmc_late_init(struct device *dev) struct platform_device, dev); struct omap_mmc_platform_data *pdata = dev->platform_data; + if (!pdata) { + dev_err(dev, "%s: NULL platform data\n", __func__); + return -EINVAL; + } /* Setting MMC1 Card detect Irq */ - if (pdev->id == 0) - pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE + - MMCDETECT_INTR_OFFSET; + if (pdev->id == 0) { + ret = twl6030_mmc_card_detect_config(); + if (ret) + dev_err(dev, "%s: Error card detect config(%d)\n", + __func__, ret); + else + pdata->slots[0].card_detect = twl6030_mmc_card_detect; + } return ret; } -- 1.6.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
