Hi Madhusudhan, On Oct 15, 2010, at 4:35 AM, Madhusudhan wrote: > > Twl4030 is the power chip. Its LDOs are modeled through the regulator > framework used by MMC1 and MMC2. On OMAP3 the card detect is from the GPIO > module of twl4030. Could you suggest an example of a board that uses TWL4030 for MMC power and card detect control, but the HSMMC MMC2 controller for enabling control of the TI WL1271 wlan module? The examples I have seen use either pure HSMMC only, or pure TWL4030 only, and I just need an example where I use the TWL4030 to supply power and detect MMC card events, for MMC1 controller, but HSMMC2 for MMC2 controller with DMA access. Best regards, Elvis Dowson -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
