From: Sanjay Kumar Champati <csanjay@xxxxxxxxxxxxxxxxxxxx> * Apply MMC2 support patch before apply this patch * Modified the "Kconfig" and "board-omap3evm.c" files to support standard SDIO driver for WL1271 DC Signed-off-by: Sanjay Kumar Champati <csanjay@xxxxxxxxxxxxxxxxxxxx> --- arch/arm/mach-omap2/board-omap3evm.c | 13 ++++++++++++- drivers/mmc/core/sdio_ops.c | 7 ++++++- drivers/net/wireless/Kconfig | 11 +++++++++++ 3 files changed, 29 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 6b45b6e..06fab2e 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -79,6 +79,10 @@ #define OMAP3EVM_ETHR_ID_REV 0x50 #define OMAP3EVM_ETHR_GPIO_IRQ 176 #define OMAP3EVM_SMSC911X_CS 5 +#ifdef CONFIG_WL1271_WLAN +#define OMAP3EVM_WLAN_EN 150 +#define OMAP3EVM_WLAN_IRQ 149 +#endif extern struct regulator_consumer_supply twl4030_vmmc1_supply; extern struct regulator_consumer_supply twl4030_vsim_supply; @@ -749,7 +753,14 @@ static int omap3evm_twl_gpio_setup(struct device *dev, twl4030_vmmc1_supply.dev = mmc[0].dev; twl4030_vsim_supply.dev = mmc[0].dev; twl4030_vmmc2_supply.dev = mmc[1].dev; - +#ifdef CONFIG_WL1271_WLAN + omap_mux_init_gpio(OMAP3EVM_WLAN_EN, OMAP_PIN_OUTPUT); + if (gpio_request(OMAP3EVM_WLAN_EN, "WLAN_ENABLE")) + printk(KERN_ERR "Fail to get WLAN Enable GPIO\n"); + gpio_direction_output(OMAP3EVM_WLAN_EN, 1); + mdelay(100); + omap_mux_init_gpio(OMAP3EVM_WLAN_IRQ, OMAP_PIN_INPUT); +#endif /* * Most GPIOs are for USB OTG. Some are mostly sent to * the P2 connector; notably LEDA for the LCD backlight. diff --git a/drivers/mmc/core/sdio_ops.c b/drivers/mmc/core/sdio_ops.c index 4eb7825..4213ee0 100644 --- a/drivers/mmc/core/sdio_ops.c +++ b/drivers/mmc/core/sdio_ops.c @@ -114,6 +114,9 @@ int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn, return 0; } +#ifdef CONFIG_WL1271_WLAN +EXPORT_SYMBOL(mmc_io_rw_direct); +#endif int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn, unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz) @@ -181,4 +184,6 @@ int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn, return 0; } - +#ifdef CONFIG_WL1271_WLAN +EXPORT_SYMBOL(mmc_io_rw_extended); +#endif diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 56dd665..dc319b7 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -31,6 +31,17 @@ config PCMCIA_RAYCS To compile this driver as a module, choose M here: the module will be called ray_cs. If unsure, say N. +config WL1271_WLAN + tristate "WL1271 TI's SDIO based wireless card" + select WIRELESS_EXT + select CRYPTO + select WEXT_SPY + select WEXT_PRIV + ---help--- + This driver support both the standard Linux Wireless Extensions + and TI's proprietary API, so both the Linux Wireless Tools and this + module support 2.4 GHz 802.11 b/g/n standrd. + config LIBERTAS_THINFIRM tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware" depends on MAC80211 -- 1.6.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
