Adds HSI framework in to the linux kernel.
High Speed Synchronous Serial Interface (HSI) is a
serial interface mainly used for connecting application
engines (APE) with cellular modem engines (CMT) in cellular
handsets.
HSI provides multiplexing for up to 16 logical channels,
low-latency and full duplex communication.
Signed-off-by: Carlos Chinea <carlos.chinea@xxxxxxxxx>
---
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/hsi/Kconfig | 13 ++
drivers/hsi/Makefile | 4 +
drivers/hsi/hsi.c | 516 +++++++++++++++++++++++++++++++++++++++++++++++
include/linux/hsi/hsi.h | 376 ++++++++++++++++++++++++++++++++++
6 files changed, 912 insertions(+), 0 deletions(-)
create mode 100644 drivers/hsi/Kconfig
create mode 100644 drivers/hsi/Makefile
create mode 100644 drivers/hsi/hsi.c
create mode 100644 include/linux/hsi/hsi.h
diff --git a/drivers/Kconfig b/drivers/Kconfig
index a2b902f..4fe39f9 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -50,6 +50,8 @@ source "drivers/i2c/Kconfig"
source "drivers/spi/Kconfig"
+source "drivers/hsi/Kconfig"
+
source "drivers/pps/Kconfig"
source "drivers/gpio/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 63e3aa9..6c6922a 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_SCSI) += scsi/
obj-$(CONFIG_ATA) += ata/
obj-$(CONFIG_MTD) += mtd/
obj-$(CONFIG_SPI) += spi/
+obj-$(CONFIG_HSI) += hsi/
obj-y += net/
obj-$(CONFIG_ATM) += atm/
obj-$(CONFIG_FUSION) += message/
diff --git a/drivers/hsi/Kconfig b/drivers/hsi/Kconfig
new file mode 100644
index 0000000..5af62ce
--- /dev/null
+++ b/drivers/hsi/Kconfig
@@ -0,0 +1,13 @@
+#
+# HSI driver configuration
+#
+menuconfig HSI
+ bool "HSI support"
+ ---help---
+ The "High speed synchronous Serial Interface" is
+ synchronous serial interface used mainly to connect
+ application engines and cellular modems.
+
+if HSI
+
+endif # HSI
diff --git a/drivers/hsi/Makefile b/drivers/hsi/Makefile
new file mode 100644
index 0000000..b42b6cf
--- /dev/null
+++ b/drivers/hsi/Makefile
@@ -0,0 +1,4 @@
+#
+# Makefile for HSI
+#
+obj-$(CONFIG_HSI) += hsi.o
diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c
new file mode 100644
index 0000000..78f1df4
--- /dev/null
+++ b/drivers/hsi/hsi.c
@@ -0,0 +1,516 @@
+/*
+ * hsi.c
+ *
+ * HSI core.
+ *
+ * Copyright (C) 2010 Nokia Corporation. All rights reserved.
+ *
+ * Contact: Carlos Chinea <carlos.chinea@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+#include <linux/hsi/hsi.h>
+#include <linux/compiler.h>
+#include <linux/rwsem.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/kobject.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+struct hsi_cl_info {
+ struct list_head list;
+ struct hsi_board_info info;
+};
+
+static LIST_HEAD(hsi_board_list);
+
+static struct device_type hsi_ctrl = {
+ .name = "hsi_controller",
+};
+
+static struct device_type hsi_cl = {
+ .name = "hsi_client",
+};
+
+static struct device_type hsi_port = {
+ .name = "hsi_port",
+};
+
+static ssize_t modalias_show(struct device *dev,
+ struct device_attribute *a __maybe_unused, char *buf)
+{
+ return sprintf(buf, "hsi:%s\n", dev_name(dev));
+}
+
+static struct device_attribute hsi_bus_dev_attrs[] = {
+ __ATTR_RO(modalias),
+ __ATTR_NULL,
+};
+
+static int hsi_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ add_uevent_var(env, "MODALIAS=hsi:%s", dev_name(dev));
+
+ return 0;
+}
+
+static int hsi_bus_match(struct device *dev, struct device_driver *driver)
+{
+ return strcmp(dev_name(dev), driver->name) == 0;
+}
+
+static struct bus_type hsi_bus_type = {
+ .name = "hsi",
+ .dev_attrs = hsi_bus_dev_attrs,
+ .match = hsi_bus_match,
+ .uevent = hsi_bus_uevent,
+};
+
+static void hsi_client_release(struct device *dev)
+{
+ kfree(to_hsi_client(dev));
+}
+
+static void hsi_new_client(struct hsi_port *port, struct hsi_board_info *info)
+{
+ struct hsi_client *cl;
+ unsigned long flags;
+
+ cl = kzalloc(sizeof(*cl), GFP_KERNEL);
+ if (!cl)
+ return;
+ cl->device.type = &hsi_cl;
+ cl->tx_cfg = info->tx_cfg;
+ cl->rx_cfg = info->rx_cfg;
+ cl->device.bus = &hsi_bus_type;
+ cl->device.parent = &port->device;
+ cl->device.release = hsi_client_release;
+ dev_set_name(&cl->device, info->name);
+ cl->device.platform_data = info->platform_data;
+ spin_lock_irqsave(&port->clock, flags);
+ list_add_tail(&cl->link, &port->clients);
+ spin_unlock_irqrestore(&port->clock, flags);
+ if (info->archdata)
+ cl->device.archdata = *info->archdata;
+ if (device_register(&cl->device) < 0) {
+ pr_err("hsi: failed to register client: %s\n", info->name);
+ kfree(cl);
+ }
+}
+
+/**
+ * hsi_register_board_info - Register HSI clients information
+ * @info: Array of HSI clients on the board
+ * @len: Length of the array
+ *
+ * HSI clients are statically declared and registered on board files.
+ *
+ * HSI clients will be automatically registered to the HSI bus once the
+ * controller and the port where the clients wishes to attach are registered
+ * to it.
+ *
+ * Return -errno on failure, 0 on success.
+ */
+int __init hsi_register_board_info(struct hsi_board_info const *info,
+ unsigned int len)
+{
+ struct hsi_cl_info *cl_info;
+
+ cl_info = kzalloc(sizeof(*cl_info) * len, GFP_KERNEL);
+ if (!cl_info)
+ return -ENOMEM;
+
+ for (; len; len--, info++, cl_info++) {
+ cl_info->info = *info;
+ list_add_tail(&cl_info->list, &hsi_board_list);
+ }
+
+ return 0;
+}
+
+static void hsi_scan_board_info(struct hsi_controller *hsi)
+{
+ struct hsi_cl_info *cl_info;
+ struct hsi_port *p;
+
+ list_for_each_entry(cl_info, &hsi_board_list, list)
+ if (cl_info->info.hsi_id == hsi->id) {
+ p = hsi_find_port_num(hsi, cl_info->info.port);
+ if (!p)
+ continue;
+ hsi_new_client(p, &cl_info->info);
+ }
+}
+
+static int hsi_remove_client(struct device *dev, void *data __maybe_unused)
+{
+ struct hsi_client *cl = to_hsi_client(dev);
+ struct hsi_port *port = to_hsi_port(dev->parent);
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->clock, flags);
+ list_del(&cl->link);
+ spin_unlock_irqrestore(&port->clock, flags);
+ device_unregister(dev);
+
+ return 0;
+}
+
+static int hsi_remove_port(struct device *dev, void *data __maybe_unused)
+{
+ device_for_each_child(dev, NULL, hsi_remove_client);
+ device_unregister(dev);
+
+ return 0;
+}
+
+static void hsi_controller_release(struct device *dev __maybe_unused)
+{
+}
+
+static void hsi_port_release(struct device *dev __maybe_unused)
+{
+}
+
+/**
+ * hsi_unregister_controller - Unregister an HSI controller
+ * @hsi: The HSI controller to register
+ */
+void hsi_unregister_controller(struct hsi_controller *hsi)
+{
+ device_for_each_child(&hsi->device, NULL, hsi_remove_port);
+ device_unregister(&hsi->device);
+}
+EXPORT_SYMBOL_GPL(hsi_unregister_controller);
+
+/**
+ * hsi_register_controller - Register an HSI controller and its ports
+ * @hsi: The HSI controller to register
+ *
+ * Returns -errno on failure, 0 on success.
+ */
+int hsi_register_controller(struct hsi_controller *hsi)
+{
+ unsigned int i;
+ int err;
+
+ hsi->device.type = &hsi_ctrl;
+ hsi->device.bus = &hsi_bus_type;
+ hsi->device.release = hsi_controller_release;
+ err = device_register(&hsi->device);
+ if (err < 0)
+ return err;
+ for (i = 0; i < hsi->num_ports; i++) {
+ hsi->port[i].device.parent = &hsi->device;
+ hsi->port[i].device.bus = &hsi_bus_type;
+ hsi->port[i].device.release = hsi_port_release;
+ hsi->port[i].device.type = &hsi_port;
+ INIT_LIST_HEAD(&hsi->port[i].clients);
+ spin_lock_init(&hsi->port[i].clock);
+ err = device_register(&hsi->port[i].device);
+ if (err < 0)
+ goto out;
+ }
+ /* Populate HSI bus with HSI clients */
+ hsi_scan_board_info(hsi);
+
+ return 0;
+out:
+ hsi_unregister_controller(hsi);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(hsi_register_controller);
+
+/**
+ * hsi_register_client_driver - Register an HSI client to the HSI bus
+ * @drv: HSI client driver to register
+ *
+ * Returns -errno on failure, 0 on success.
+ */
+int hsi_register_client_driver(struct hsi_client_driver *drv)
+{
+ drv->driver.bus = &hsi_bus_type;
+
+ return driver_register(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(hsi_register_client_driver);
+
+static inline int hsi_dummy_msg(struct hsi_msg *msg __maybe_unused)
+{
+ return 0;
+}
+
+static inline int hsi_dummy_cl(struct hsi_client *cl __maybe_unused)
+{
+ return 0;
+}
+
+/**
+ * hsi_alloc_controller - Allocate an HSI controller and its ports
+ * @n_ports: Number of ports on the HSI controller
+ * @flags: Kernel allocation flags
+ *
+ * Return NULL on failure or a pointer to an hsi_controller on success.
+ */
+struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags)
+{
+ struct hsi_controller *hsi;
+ struct hsi_port *port;
+ unsigned int i;
+
+ if (!n_ports)
+ return NULL;
+
+ port = kzalloc(sizeof(*port)*n_ports, flags);
+ if (!port)
+ return NULL;
+ hsi = kzalloc(sizeof(*hsi), flags);
+ if (!hsi)
+ goto out;
+ for (i = 0; i < n_ports; i++) {
+ dev_set_name(&port[i].device, "port%d", i);
+ port[i].num = i;
+ port[i].async = hsi_dummy_msg;
+ port[i].setup = hsi_dummy_cl;
+ port[i].flush = hsi_dummy_cl;
+ port[i].start_tx = hsi_dummy_cl;
+ port[i].stop_tx = hsi_dummy_cl;
+ port[i].release = hsi_dummy_cl;
+ mutex_init(&port[i].lock);
+ }
+ hsi->num_ports = n_ports;
+ hsi->port = port;
+
+ return hsi;
+out:
+ kfree(port);
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(hsi_alloc_controller);
+
+/**
+ * hsi_free_controller - Free an HSI controller
+ * @hsi: Pointer to HSI controller
+ */
+void hsi_free_controller(struct hsi_controller *hsi)
+{
+ if (!hsi)
+ return;
+
+ kfree(hsi->port);
+ kfree(hsi);
+}
+EXPORT_SYMBOL_GPL(hsi_free_controller);
+
+/**
+ * hsi_free_msg - Free an HSI message
+ * @msg: Pointer to the HSI message
+ *
+ * Client is responsible to free the buffers pointed by the scatterlists.
+ */
+void hsi_free_msg(struct hsi_msg *msg)
+{
+ if (!msg)
+ return;
+ sg_free_table(&msg->sgt);
+ kfree(msg);
+}
+EXPORT_SYMBOL_GPL(hsi_free_msg);
+
+/**
+ * hsi_alloc_msg - Allocate an HSI message
+ * @nents: Number of memory entries
+ * @flags: Kernel allocation flags
+ *
+ * nents can be 0. This mainly makes sense for read transfer.
+ * In that case, HSI drivers will call the complete callback when
+ * there is data to be read without consuming it.
+ *
+ * Return NULL on failure or a pointer to an hsi_msg on success.
+ */
+struct hsi_msg *hsi_alloc_msg(unsigned int nents, gfp_t flags)
+{
+ struct hsi_msg *msg;
+ int err;
+
+ msg = kzalloc(sizeof(*msg), flags);
+ if (!msg)
+ return NULL;
+
+ if (!nents)
+ return msg;
+
+ err = sg_alloc_table(&msg->sgt, nents, flags);
+ if (unlikely(err)) {
+ kfree(msg);
+ msg = NULL;
+ }
+
+ return msg;
+}
+EXPORT_SYMBOL_GPL(hsi_alloc_msg);
+
+/**
+ * hsi_async - Submit an HSI transfer to the controller
+ * @cl: HSI client sending the transfer
+ * @msg: The HSI transfer passed to controller
+ *
+ * The HSI message must have the channel, ttype, complete and destructor
+ * fields set beforehand. If nents > 0 then the client has to initialize
+ * also the scatterlists to point to the buffers to write to or read from.
+ *
+ * HSI controllers relay on pre-allocated buffers from their clients and they
+ * do not allocate buffers on their own.
+ *
+ * Once the HSI message transfer finishes, the HSI controller calls the
+ * complete callback with the status and actual_len fields of the HSI message
+ * updated. The complete callback can be called before returning from
+ * hsi_async.
+ *
+ * Returns -errno on failure or 0 on success
+ */
+int hsi_async(struct hsi_client *cl, struct hsi_msg *msg)
+{
+ struct hsi_port *port = hsi_get_port(cl);
+
+ if (!hsi_port_claimed(cl))
+ return -EACCES;
+
+ WARN_ON_ONCE(!msg->destructor || !msg->complete);
+ msg->cl = cl;
+
+ return port->async(msg);
+}
+EXPORT_SYMBOL_GPL(hsi_async);
+
+/**
+ * hsi_claim_port - Claim the HSI client's port
+ * @cl: HSI client that wants to claim its port
+ * @share: Flag to indicate if the client wants to share the port or not.
+ *
+ * Returns -errno on failure, 0 on success.
+ */
+int hsi_claim_port(struct hsi_client *cl, unsigned int share)
+{
+ struct hsi_port *port = hsi_get_port(cl);
+ int err = 0;
+
+ mutex_lock(&port->lock);
+ if ((port->claimed) && (!port->shared || !share)) {
+ err = -EBUSY;
+ goto out;
+ }
+ port->claimed++;
+ port->shared = !!share;
+ cl->pclaimed = 1;
+out:
+ mutex_unlock(&port->lock);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(hsi_claim_port);
+
+/**
+ * hsi_release_port - Release the HSI client's port
+ * @cl: HSI client which previously claimed its port
+ */
+void hsi_release_port(struct hsi_client *cl)
+{
+ struct hsi_port *port = hsi_get_port(cl);
+
+ mutex_lock(&port->lock);
+ /* Allow HW driver to do some cleanup */
+ port->release(cl);
+ if (cl->pclaimed)
+ port->claimed--;
+ BUG_ON(port->claimed < 0);
+ cl->pclaimed = 0;
+ if (!port->claimed)
+ port->shared = 0;
+ mutex_unlock(&port->lock);
+}
+EXPORT_SYMBOL_GPL(hsi_release_port);
+
+static int hsi_start_rx(struct hsi_client *cl, void *data __maybe_unused)
+{
+ if (cl->hsi_start_rx)
+ (*cl->hsi_start_rx)(cl);
+
+ return 0;
+}
+
+static int hsi_stop_rx(struct hsi_client *cl, void *data __maybe_unused)
+{
+ if (cl->hsi_stop_rx)
+ (*cl->hsi_stop_rx)(cl);
+
+ return 0;
+}
+
+static int hsi_port_for_each_client(struct hsi_port *port, void *data,
+ int (*fn)(struct hsi_client *cl, void *data))
+{
+ struct hsi_client *cl;
+
+ spin_lock(&port->clock);
+ list_for_each_entry(cl, &port->clients, link) {
+ spin_unlock(&port->clock);
+ (*fn)(cl, data);
+ spin_lock(&port->clock);
+ }
+ spin_unlock(&port->clock);
+
+ return 0;
+}
+
+/**
+ * hsi_event -Notifies clients about port events
+ * @port: Port where the event occurred
+ * @event: The event type
+ *
+ * Clients should not be concerned about wake line behavior. However, due
+ * to a race condition in HSI HW protocol, clients need to be notified
+ * about wake line changes, so they can implement a workaround for it.
+ *
+ * Events:
+ * HSI_EVENT_START_RX - Incoming wake line high
+ * HSI_EVENT_STOP_RX - Incoming wake line down
+ */
+void hsi_event(struct hsi_port *port, unsigned int event)
+{
+ int (*fn)(struct hsi_client *cl, void *data);
+
+ switch (event) {
+ case HSI_EVENT_START_RX:
+ fn = hsi_start_rx;
+ break;
+ case HSI_EVENT_STOP_RX:
+ fn = hsi_stop_rx;
+ break;
+ default:
+ return;
+ }
+ hsi_port_for_each_client(port, NULL, fn);
+}
+EXPORT_SYMBOL_GPL(hsi_event);
+
+static int __init hsi_init(void)
+{
+ return bus_register(&hsi_bus_type);
+}
+postcore_initcall(hsi_init);
diff --git a/include/linux/hsi/hsi.h b/include/linux/hsi/hsi.h
new file mode 100644
index 0000000..54ae22a
--- /dev/null
+++ b/include/linux/hsi/hsi.h
@@ -0,0 +1,376 @@
+/*
+ * hsi.h
+ *
+ * HSI core header file.
+ *
+ * Copyright (C) 2010 Nokia Corporation. All rights reserved.
+ *
+ * Contact: Carlos Chinea <carlos.chinea@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_HSI_H__
+#define __LINUX_HSI_H__
+
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/scatterlist.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+/* HSI message ttype */
+#define HSI_MSG_READ 0
+#define HSI_MSG_WRITE 1
+
+/* HSI configuration values */
+#define HSI_MODE_STREAM 1
+#define HSI_MODE_FRAME 2
+#define HSI_FLOW_SYNC 0 /* Synchronized flow */
+#define HSI_FLOW_PIPE 1 /* Pipelined flow */
+#define HSI_ARB_RR 0 /* Round-robin arbitration */
+#define HSI_ARB_PRIO 1 /* Channel priority arbitration */
+
+#define HSI_MAX_CHANNELS 16
+
+/* HSI message status codes */
+enum {
+ HSI_STATUS_COMPLETED, /* Message transfer is completed */
+ HSI_STATUS_PENDING, /* Message pending to be read/write (POLL) */
+ HSI_STATUS_PROCEEDING, /* Message transfer is ongoing */
+ HSI_STATUS_QUEUED, /* Message waiting to be served */
+ HSI_STATUS_ERROR, /* Error when message transfer was ongoing */
+};
+
+/* HSI port event codes */
+enum {
+ HSI_EVENT_START_RX,
+ HSI_EVENT_STOP_RX,
+};
+
+/**
+ * struct hsi_config - Configuration for RX/TX HSI modules
+ * @mode: Bit transmission mode (STREAM or FRAME)
+ * @flow: Flow type (SYNCHRONIZED or PIPELINE)
+ * @channels: Number of channels to use [1..16]
+ * @speed: Max bit transmission speed (Kbit/s)
+ * @arb_mode: Arbitration mode for TX frame (Round robin, priority)
+ */
+struct hsi_config {
+ unsigned int mode;
+ unsigned int flow;
+ unsigned int channels;
+ unsigned int speed;
+ unsigned int arb_mode; /* TX only */
+};
+
+/**
+ * struct hsi_board_info - HSI client board info
+ * @name: Name for the HSI device
+ * @hsi_id: HSI controller id where the client sits
+ * @port: Port number in the controller where the client sits
+ * @tx_cfg: HSI TX configuration
+ * @rx_cfg: HSI RX configuration
+ * @platform_data: Platform related data
+ * @archdata: Architecture-dependent device data
+ */
+struct hsi_board_info {
+ const char *name;
+ int hsi_id;
+ unsigned int port;
+ struct hsi_config tx_cfg;
+ struct hsi_config rx_cfg;
+ void *platform_data;
+ struct dev_archdata *archdata;
+};
+
+#ifdef CONFIG_HSI
+extern int hsi_register_board_info(struct hsi_board_info const *info,
+ unsigned int len);
+#else
+static inline int hsi_register_board_info(struct hsi_board_info const *info,
+ unsigned int len)
+{
+ return 0;
+}
+#endif
+
+/**
+ * struct hsi_client - HSI client attached to an HSI port
+ * @device: Driver model representation of the device
+ * @tx_cfg: HSI TX configuration
+ * @rx_cfg: HSI RX configuration
+ * @hsi_start_rx: Called after incoming wake line goes high
+ * @hsi_stop_rx: Called after incoming wake line goes low
+ */
+struct hsi_client {
+ struct device device;
+ struct hsi_config tx_cfg;
+ struct hsi_config rx_cfg;
+ void (*hsi_start_rx)(struct hsi_client *cl);
+ void (*hsi_stop_rx)(struct hsi_client *cl);
+ /* private: */
+ unsigned int pclaimed:1;
+ struct list_head link;
+};
+
+#define to_hsi_client(dev) container_of(dev, struct hsi_client, device)
+
+static inline void hsi_client_set_drvdata(struct hsi_client *cl, void *data)
+{
+ dev_set_drvdata(&cl->device, data);
+}
+
+static inline void *hsi_client_drvdata(struct hsi_client *cl)
+{
+ return dev_get_drvdata(&cl->device);
+}
+
+/**
+ * struct hsi_client_driver - Driver associated to an HSI client
+ * @driver: Driver model representation of the driver
+ */
+struct hsi_client_driver {
+ struct device_driver driver;
+};
+
+#define to_hsi_client_driver(drv) container_of(drv, struct hsi_client_driver,\
+ driver)
+
+int hsi_register_client_driver(struct hsi_client_driver *drv);
+
+static inline void hsi_unregister_client_driver(struct hsi_client_driver *drv)
+{
+ driver_unregister(&drv->driver);
+}
+
+/**
+ * struct hsi_msg - HSI message descriptor
+ * @link: Free to use by the current descriptor owner
+ * @cl: HSI device client that issues the transfer
+ * @sgt: Head of the scatterlist array
+ * @context: Client context data associated to the transfer
+ * @complete: Transfer completion callback
+ * @destructor: Destructor to free resources when flushing
+ * @status: Status of the transfer when completed
+ * @actual_len: Actual length of data transfered on completion
+ * @channel: Channel were to TX/RX the message
+ * @ttype: Transfer type (TX if set, RX otherwise)
+ * @break_frame: if true HSI will send/receive a break frame (FRAME MODE)
+ */
+struct hsi_msg {
+ struct list_head link;
+ struct hsi_client *cl;
+ struct sg_table sgt;
+ void *context;
+
+ void (*complete)(struct hsi_msg *msg);
+ void (*destructor)(struct hsi_msg *msg);
+
+ int status;
+ unsigned int actual_len;
+ unsigned int channel;
+ unsigned int ttype:1;
+ unsigned int break_frame:1;
+};
+
+struct hsi_msg *hsi_alloc_msg(unsigned int n_frag, gfp_t flags);
+void hsi_free_msg(struct hsi_msg *msg);
+
+/**
+ * struct hsi_port - HSI port device
+ * @device: Driver model representation of the device
+ * @tx_cfg: Current TX path configuration
+ * @rx_cfg: Current RX path configuration
+ * @num: Port number
+ * @shared: Set when port can be shared by different clients
+ * @claimed: Reference count of clients which claimed the port
+ * @lock: Serialize port claim
+ * @async: Asynchronous transfer callback
+ * @setup: Callback to set the HSI client configuration
+ * @flush: Callback to clean the HW state and destroy all pending transfers
+ * @start_tx: Callback to inform that a client wants to TX data
+ * @stop_tx: Callback to inform that a client no longer wishes to TX data
+ * @release: Callback to inform that a client no longer uses the port
+ * @clients: List of hsi_clients using the port.
+ * @clock: Lock to serialize access to the clients list.
+ */
+struct hsi_port {
+ struct device device;
+ struct hsi_config tx_cfg;
+ struct hsi_config rx_cfg;
+ unsigned int num;
+ unsigned int shared:1;
+ int claimed;
+ struct mutex lock;
+ int (*async)(struct hsi_msg *msg);
+ int (*setup)(struct hsi_client *cl);
+ int (*flush)(struct hsi_client *cl);
+ int (*start_tx)(struct hsi_client *cl);
+ int (*stop_tx)(struct hsi_client *cl);
+ int (*release)(struct hsi_client *cl);
+ struct list_head clients;
+ spinlock_t clock;
+};
+
+#define to_hsi_port(dev) container_of(dev, struct hsi_port, device)
+#define hsi_get_port(cl) to_hsi_port((cl)->device.parent)
+
+void hsi_event(struct hsi_port *port, unsigned int event);
+int hsi_claim_port(struct hsi_client *cl, unsigned int share);
+void hsi_release_port(struct hsi_client *cl);
+
+static inline int hsi_port_claimed(struct hsi_client *cl)
+{
+ return cl->pclaimed;
+}
+
+static inline void hsi_port_set_drvdata(struct hsi_port *port, void *data)
+{
+ dev_set_drvdata(&port->device, data);
+}
+
+static inline void *hsi_port_drvdata(struct hsi_port *port)
+{
+ return dev_get_drvdata(&port->device);
+}
+
+/**
+ * struct hsi_controller - HSI controller device
+ * @device: Driver model representation of the device
+ * @id: HSI controller ID
+ * @num_ports: Number of ports in the HSI controller
+ * @port: Array of HSI ports
+ */
+struct hsi_controller {
+ struct device device;
+ int id;
+ unsigned int num_ports;
+ struct hsi_port *port;
+};
+
+#define to_hsi_controller(dev) container_of(dev, struct hsi_controller, device)
+
+struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags);
+void hsi_free_controller(struct hsi_controller *hsi);
+int hsi_register_controller(struct hsi_controller *hsi);
+void hsi_unregister_controller(struct hsi_controller *hsi);
+
+static inline void hsi_controller_set_drvdata(struct hsi_controller *hsi,
+ void *data)
+{
+ dev_set_drvdata(&hsi->device, data);
+}
+
+static inline void *hsi_controller_drvdata(struct hsi_controller *hsi)
+{
+ return dev_get_drvdata(&hsi->device);
+}
+
+static inline struct hsi_port *hsi_find_port_num(struct hsi_controller *hsi,
+ unsigned int num)
+{
+ return (num < hsi->num_ports) ? &hsi->port[num] : NULL;
+}
+
+/*
+ * API for HSI clients
+ */
+int hsi_async(struct hsi_client *cl, struct hsi_msg *msg);
+
+/**
+ * hsi_setup - Configure the client's port
+ * @cl: Pointer to the HSI client
+ *
+ * When sharing ports, clients should either relay on a single
+ * client setup or have the same setup for all of them.
+ *
+ * Return -errno on failure, 0 on success
+ */
+static inline int hsi_setup(struct hsi_client *cl)
+{
+ if (!hsi_port_claimed(cl))
+ return -EACCES;
+ return hsi_get_port(cl)->setup(cl);
+}
+
+/**
+ * hsi_flush - Flush all pending transactions on the client's port
+ * @cl: Pointer to the HSI client
+ *
+ * This function will destroy all pending hsi_msg in the port and reset
+ * the HW port so it is ready to receive and transmit from a clean state.
+ *
+ * Return -errno on failure, 0 on success
+ */
+static inline int hsi_flush(struct hsi_client *cl)
+{
+ if (!hsi_port_claimed(cl))
+ return -EACCES;
+ return hsi_get_port(cl)->flush(cl);
+}
+
+/**
+ * hsi_async_read - Submit a read transfer
+ * @cl: Pointer to the HSI client
+ * @msg: HSI message descriptor of the transfer
+ *
+ * Return -errno on failure, 0 on success
+ */
+static inline int hsi_async_read(struct hsi_client *cl, struct hsi_msg *msg)
+{
+ msg->ttype = HSI_MSG_READ;
+ return hsi_async(cl, msg);
+}
+
+/**
+ * hsi_async_write - Submit a write transfer
+ * @cl: Pointer to the HSI client
+ * @msg: HSI message descriptor of the transfer
+ *
+ * Return -errno on failure, 0 on success
+ */
+static inline int hsi_async_write(struct hsi_client *cl, struct hsi_msg *msg)
+{
+ msg->ttype = HSI_MSG_WRITE;
+ return hsi_async(cl, msg);
+}
+
+/**
+ * hsi_start_tx - Signal the port that the client wants to start a TX
+ * @cl: Pointer to the HSI client
+ *
+ * Return -errno on failure, 0 on success
+ */
+static inline int hsi_start_tx(struct hsi_client *cl)
+{
+ if (!hsi_port_claimed(cl))
+ return -EACCES;
+ return hsi_get_port(cl)->start_tx(cl);
+}
+
+/**
+ * hsi_stop_tx - Signal the port that the client no longer wants to transmit
+ * @cl: Pointer to the HSI client
+ *
+ * Return -errno on failure, 0 on success
+ */
+static inline int hsi_stop_tx(struct hsi_client *cl)
+{
+ if (!hsi_port_claimed(cl))
+ return -EACCES;
+ return hsi_get_port(cl)->stop_tx(cl);
+}
+#endif /* __LINUX_HSI_H__ */
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
