From: Vaibhav Hiremath <hvaibhav@xxxxxx> Since access to TWL GPIO's can go into sleep, and using normal gpio_get/set_value() API will lead to kernel dump (of WARN_ON()). On OMAP3EVM LCD backlight & DVI encoder is controller through TWL GPIO, so replacing normal gpio_get/set_value() to gpio_get_set_value_cansleep(). Signed-off-by: Vaibhav Hiremath <hvaibhav@xxxxxx> --- arch/arm/mach-omap2/board-omap3evm.c | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index adfb7ad..633c89e 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -234,9 +234,9 @@ static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev) gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 0); if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) - gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0); + gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0); else - gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1); + gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1); lcd_enabled = 1; return 0; @@ -247,9 +247,9 @@ static void omap3_evm_disable_lcd(struct omap_dss_device *dssdev) gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 1); if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) - gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1); + gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1); else - gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0); + gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0); lcd_enabled = 0; } @@ -288,7 +288,7 @@ static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev) return -EINVAL; } - gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 1); + gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 1); dvi_enabled = 1; return 0; @@ -296,7 +296,7 @@ static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev) static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev) { - gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 0); + gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 0); dvi_enabled = 0; } -- 1.6.2.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html