The OMAP4 PandaBoard has EHCI port1 hooked up to an external
SMSC3320 transciever. GPIO 1 is used to power on the transceiver
and GPIO 62 for reset on the transceiver.
Signed-off-by: David Anders <x0132446@xxxxxx>
Signed-off-by: Anand Gadiyar <gadiyar@xxxxxx>
---
arch/arm/mach-omap2/board-omap4panda.c | 54 ++++++++++++++++++++++++++++++++
1 files changed, 54 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 94e819c..6163a59 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -39,6 +39,8 @@
#include <plat/mmc.h>
#include "hsmmc.h"
+#define GPIO_HUB_POWER 1
+#define GPIO_HUB_NRESET 62
static void __init omap4_panda_init_irq(void)
{
@@ -280,6 +282,57 @@ static int __init omap4_panda_i2c_init(void)
omap_register_i2c_bus(4, 400, NULL, 0);
return 0;
}
+
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+ .phy_reset = false,
+ .reset_gpio_port[0] = -EINVAL,
+ .reset_gpio_port[1] = -EINVAL,
+ .reset_gpio_port[2] = -EINVAL
+};
+
+static void __init omap4_ehci_init(void)
+{
+ int ret;
+
+
+ /* disable the power to the usb hub prior to init */
+ ret = gpio_request(GPIO_HUB_POWER, "hub_power");
+ if (ret) {
+ pr_err("Cannot request GPIO %d\n", GPIO_HUB_POWER);
+ goto error1;
+ }
+ gpio_export(GPIO_HUB_POWER, 0);
+ gpio_direction_output(GPIO_HUB_POWER, 0);
+ gpio_set_value(GPIO_HUB_POWER, 0);
+
+ /* reset phy+hub */
+ ret = gpio_request(GPIO_HUB_NRESET, "hub_nreset");
+ if (ret) {
+ pr_err("Cannot request GPIO %d\n", GPIO_HUB_NRESET);
+ goto error2;
+ }
+ gpio_export(GPIO_HUB_NRESET, 0);
+ gpio_direction_output(GPIO_HUB_NRESET, 0);
+ gpio_set_value(GPIO_HUB_NRESET, 0);
+ gpio_set_value(GPIO_HUB_NRESET, 1);
+
+ usb_ehci_init(&ehci_pdata);
+
+ /* enable power to hub */
+ gpio_set_value(GPIO_HUB_POWER, 1);
+ return;
+
+error2:
+ gpio_free(GPIO_HUB_POWER);
+error1:
+ pr_err("Unable to initialize EHCI power/reset\n");
+ return;
+
+}
+
static void __init omap4_panda_init(void)
{
omap4_panda_i2c_init();
@@ -287,6 +340,7 @@ static void __init omap4_panda_init(void)
omap4_twl6030_hsmmc_init(mmc);
/* OMAP4 Panda uses internal transceiver so register nop transceiver */
usb_nop_xceiv_register();
+ omap4_ehci_init();
/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
if (!cpu_is_omap44xx())
usb_musb_init(&musb_board_data);
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
