RE: [PATCHv3 01/11] staging: tidspbridge: replace iommu custom for opensource implementation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: David Cohen [mailto:david.cohen@xxxxxxxxx]
> Sent: Wednesday, October 06, 2010 12:33 PM
> To: Guzman Lugo, Fernando
> Cc: gregkh@xxxxxxx; Contreras Felipe (Nokia-MS/Helsinki);
> Palande Ameya (Nokia-MS/Helsinki); Menon, Nishanth; Doyu
> Hiroshi (Nokia-MS/Espoo); ohad@xxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; andy.shevchenko@xxxxxxxxx;
> linux-omap@xxxxxxxxxxxxxxx
> Subject: Re: [PATCHv3 01/11] staging: tidspbridge: replace
> iommu custom for opensource implementation
>
> Hi Fernando,
>
> I have few comments below.

Hi David,

        Thanks for review.

>
> > diff --git a/drivers/staging/tidspbridge/core/io_sm.c
> > b/drivers/staging/tidspbridge/core/io_sm.c
> > index 5718645..842b8db 100644
> > --- a/drivers/staging/tidspbridge/core/io_sm.c
> > +++ b/drivers/staging/tidspbridge/core/io_sm.c
> > @@ -291,6 +291,7 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
> >         struct cod_manager *cod_man;
> >         struct chnl_mgr *hchnl_mgr;
> >         struct msg_mgr *hmsg_mgr;
> > +       struct iommu *mmu;
> >         u32 ul_shm_base;
> >         u32 ul_shm_base_offset;
> >         u32 ul_shm_limit;
> > @@ -313,7 +314,6 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
> >         struct bridge_ioctl_extproc ae_proc[BRDIOCTL_NUMOFMMUTLB];
> >         struct cfg_hostres *host_res;
> >         struct bridge_dev_context *pbridge_context;
> > -       u32 map_attrs;
> >         u32 shm0_end;
> >         u32 ul_dyn_ext_base;
> >         u32 ul_seg1_size = 0;
> > @@ -337,6 +337,20 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
> >                 status = -EFAULT;
> >                 goto func_end;
> >         }
> > +       mmu = pbridge_context->dsp_mmu;
> > +
> > +       if (mmu)
> > +               iommu_put(mmu);
> > +       mmu = iommu_get("iva2");
> > +
> > +       if (IS_ERR_OR_NULL(mmu)) {
>
> You can use IS_ERR() instead.
>

The patch are already merged, so I cannot modified this patch. Even tought
That change is done when all related code is change to the new file
Dsp-mmu.c. Please check patch 7/11.

> [snip]
>
> > @@ -1122,217 +1081,81 @@ static int
> bridge_brd_mem_write(struct bridge_dev_context *dev_ctxt,
> >   *
> >   *  TODO: Disable MMU while updating the page tables (but
> that'll stall DSP)
> >   */
> > -static int bridge_brd_mem_map(struct bridge_dev_context *dev_ctxt,
> > -                                 u32 ul_mpu_addr, u32 virt_addr,
> > -                                 u32 ul_num_bytes, u32 ul_map_attr,
> > -                                 struct page **mapped_pages)
> > +static int bridge_brd_mem_map(struct bridge_dev_context *dev_ctx,
> > +                       u32 uva, u32 da, u32 size, u32 attr,
> > +                       struct page **usr_pgs)
> > +
> >  {
> > -       u32 attrs;
> > -       int status = 0;
> > -       struct bridge_dev_context *dev_context = dev_ctxt;
> > -       struct hw_mmu_map_attrs_t hw_attrs;
> > +       int res, w;
> > +       unsigned pages, i;
> > +       struct iommu *mmu = dev_ctx->dsp_mmu;
> >         struct vm_area_struct *vma;
> >         struct mm_struct *mm = current->mm;
> > -       u32 write = 0;
> > -       u32 num_usr_pgs = 0;
> > -       struct page *mapped_page, *pg;
> > -       s32 pg_num;
> > -       u32 va = virt_addr;
> > -       struct task_struct *curr_task = current;
> > -       u32 pg_i = 0;
> > -       u32 mpu_addr, pa;
> > -
> > -       dev_dbg(bridge,
> > -               "%s hDevCtxt %p, pa %x, va %x, size %x,
> ul_map_attr %x\n",
> > -               __func__, dev_ctxt, ul_mpu_addr, virt_addr,
> ul_num_bytes,
> > -               ul_map_attr);
> > -       if (ul_num_bytes == 0)
> > -               return -EINVAL;
> > +       struct sg_table *sgt;
> > +       struct scatterlist *sg;
> >
> > -       if (ul_map_attr & DSP_MAP_DIR_MASK) {
> > -               attrs = ul_map_attr;
> > -       } else {
> > -               /* Assign default attributes */
> > -               attrs = ul_map_attr | (DSP_MAPVIRTUALADDR |
> DSP_MAPELEMSIZE16);
> > -       }
> > -       /* Take mapping properties */
> > -       if (attrs & DSP_MAPBIGENDIAN)
> > -               hw_attrs.endianism = HW_BIG_ENDIAN;
> > -       else
> > -               hw_attrs.endianism = HW_LITTLE_ENDIAN;
> > -
> > -       hw_attrs.mixed_size = (enum hw_mmu_mixed_size_t)
> > -           ((attrs & DSP_MAPMIXEDELEMSIZE) >> 2);
> > -       /* Ignore element_size if mixed_size is enabled */
> > -       if (hw_attrs.mixed_size == 0) {
> > -               if (attrs & DSP_MAPELEMSIZE8) {
> > -                       /* Size is 8 bit */
> > -                       hw_attrs.element_size = HW_ELEM_SIZE8BIT;
> > -               } else if (attrs & DSP_MAPELEMSIZE16) {
> > -                       /* Size is 16 bit */
> > -                       hw_attrs.element_size = HW_ELEM_SIZE16BIT;
> > -               } else if (attrs & DSP_MAPELEMSIZE32) {
> > -                       /* Size is 32 bit */
> > -                       hw_attrs.element_size = HW_ELEM_SIZE32BIT;
> > -               } else if (attrs & DSP_MAPELEMSIZE64) {
> > -                       /* Size is 64 bit */
> > -                       hw_attrs.element_size = HW_ELEM_SIZE64BIT;
> > -               } else {
> > -                       /*
> > -                        * Mixedsize isn't enabled, so size can't be
> > -                        * zero here
> > -                        */
> > -                       return -EINVAL;
> > -               }
> > -       }
> > -       if (attrs & DSP_MAPDONOTLOCK)
> > -               hw_attrs.donotlockmpupage = 1;
> > -       else
> > -               hw_attrs.donotlockmpupage = 0;
> > +       if (!size || !usr_pgs)
> > +               return -EINVAL;
> >
> > -       if (attrs & DSP_MAPVMALLOCADDR) {
> > -               return mem_map_vmalloc(dev_ctxt,
> ul_mpu_addr, virt_addr,
> > -                                      ul_num_bytes, &hw_attrs);
> > -       }
> > -       /*
> > -        * Do OS-specific user-va to pa translation.
> > -        * Combine physically contiguous regions to reduce TLBs.
> > -        * Pass the translated pa to pte_update.
> > -        */
> > -       if ((attrs & DSP_MAPPHYSICALADDR)) {
> > -               status = pte_update(dev_context,
> ul_mpu_addr, virt_addr,
> > -                                   ul_num_bytes, &hw_attrs);
> > -               goto func_cont;
> > -       }
> > +       pages = size / PG_SIZE4K;
>
> Can you ensure 'size' is always PG_SIZE4K aligned?
> I don't have so much knowledge about the dsp bridge
> implementation, but you're testing only if size == 0.

That is checked in proc_map() in .../tidspbridge/rmgr/proc.c

We always receive a PAGE aligned size in bridge_brd_mem_map,
I just keep the 0 check for size just for precaution in case
Of some overflow when roundup.

>
> >
> > -       /*
> > -        * Important Note: ul_mpu_addr is mapped from user
> application process
> > -        * to current process - it must lie completely
> within the current
> > -        * virtual memory address space in order to be of
> use to us here!
> > -        */
> >         down_read(&mm->mmap_sem);
> > -       vma = find_vma(mm, ul_mpu_addr);
> > -       if (vma)
> > -               dev_dbg(bridge,
> > -                       "VMAfor UserBuf: ul_mpu_addr=%x,
> ul_num_bytes=%x, "
> > -                       "vm_start=%lx, vm_end=%lx,
> vm_flags=%lx\n", ul_mpu_addr,
> > -                       ul_num_bytes, vma->vm_start, vma->vm_end,
> > -                       vma->vm_flags);
> > -
> > -       /*
> > -        * It is observed that under some circumstances,
> the user buffer is
> > -        * spread across several VMAs. So loop through and
> check if the entire
> > -        * user buffer is covered
> > -        */
> > -       while ((vma) && (ul_mpu_addr + ul_num_bytes >
> vma->vm_end)) {
> > -               /* jump to the next VMA region */
> > +       vma = find_vma(mm, uva);
> > +       while (vma && (uva + size > vma->vm_end))
> >                 vma = find_vma(mm, vma->vm_end + 1);
> > -               dev_dbg(bridge,
> > -                       "VMA for UserBuf ul_mpu_addr=%x
> ul_num_bytes=%x, "
> > -                       "vm_start=%lx, vm_end=%lx,
> vm_flags=%lx\n", ul_mpu_addr,
> > -                       ul_num_bytes, vma->vm_start, vma->vm_end,
> > -                       vma->vm_flags);
> > -       }
> > +
> >         if (!vma) {
> >                 pr_err("%s: Failed to get VMA region for
> 0x%x (%d)\n",
> > -                      __func__, ul_mpu_addr, ul_num_bytes);
> > -               status = -EINVAL;
> > +                                               __func__,
> uva, size);
> >                 up_read(&mm->mmap_sem);
> > -               goto func_cont;
> > +               return -EINVAL;
> >         }
> > +       if (vma->vm_flags & (VM_WRITE | VM_MAYWRITE))
> > +               w = 1;
> >
> > -       if (vma->vm_flags & VM_IO) {
> > -               num_usr_pgs = ul_num_bytes / PG_SIZE4K;
> > -               mpu_addr = ul_mpu_addr;
> > -
> > -               /* Get the physical addresses for user buffer */
> > -               for (pg_i = 0; pg_i < num_usr_pgs; pg_i++) {
> > -                       pa = user_va2_pa(mm, mpu_addr);
> > -                       if (!pa) {
> > -                               status = -EPERM;
> > -                               pr_err("DSPBRIDGE: VM_IO
> mapping physical"
> > -                                      "address is invalid\n");
> > -                               break;
> > -                       }
> > -                       if (pfn_valid(__phys_to_pfn(pa))) {
> > -                               pg = PHYS_TO_PAGE(pa);
> > -                               get_page(pg);
> > -                               if (page_count(pg) < 1) {
> > -                                       pr_err("Bad page in
> VM_IO buffer\n");
> > -                                       bad_page_dump(pa, pg);
> > -                               }
> > -                       }
> > -                       status = pte_set(dev_context->pt_attrs, pa,
> > -                                        va,
> HW_PAGE_SIZE4KB, &hw_attrs);
> > -                       if (status)
> > -                               break;
> > +       if (vma->vm_flags & VM_IO)
> > +               i = get_io_pages(mm, uva, pages, usr_pgs);
> > +       else
> > +               i = get_user_pages(current, mm, uva, pages, w, 1,
> > +
> usr_pgs, NULL);
> > +       up_read(&mm->mmap_sem);
> >
> > -                       va += HW_PAGE_SIZE4KB;
> > -                       mpu_addr += HW_PAGE_SIZE4KB;
> > -                       pa += HW_PAGE_SIZE4KB;
> > -               }
> > -       } else {
> > -               num_usr_pgs = ul_num_bytes / PG_SIZE4K;
> > -               if (vma->vm_flags & (VM_WRITE | VM_MAYWRITE))
> > -                       write = 1;
> > -
> > -               for (pg_i = 0; pg_i < num_usr_pgs; pg_i++) {
> > -                       pg_num = get_user_pages(curr_task,
> mm, ul_mpu_addr, 1,
> > -                                               write, 1,
> &mapped_page, NULL);
> > -                       if (pg_num > 0) {
> > -                               if (page_count(mapped_page) < 1) {
> > -                                       pr_err("Bad page
> count after doing"
> > -                                              "get_user_pages on"
> > -                                              "user buffer\n");
> > -
> bad_page_dump(page_to_phys(mapped_page),
> > -                                                     mapped_page);
> > -                               }
> > -                               status =
> pte_set(dev_context->pt_attrs,
> > -
> page_to_phys(mapped_page), va,
> > -
> HW_PAGE_SIZE4KB, &hw_attrs);
> > -                               if (status)
> > -                                       break;
> > -
> > -                               if (mapped_pages)
> > -                                       mapped_pages[pg_i]
> = mapped_page;
> > -
> > -                               va += HW_PAGE_SIZE4KB;
> > -                               ul_mpu_addr += HW_PAGE_SIZE4KB;
> > -                       } else {
> > -                               pr_err("DSPBRIDGE:
> get_user_pages FAILED,"
> > -                                      "MPU addr = 0x%x,"
> > -                                      "vma->vm_flags = 0x%lx,"
> > -                                      "get_user_pages Err"
> > -                                      "Value = %d, Buffer"
> > -                                      "size=0x%x\n", ul_mpu_addr,
> > -                                      vma->vm_flags,
> pg_num, ul_num_bytes);
> > -                               status = -EPERM;
> > -                               break;
> > -                       }
> > -               }
> > +       if (i < 0)
> > +               return i;
> > +
> > +       if (i < pages) {
> > +               res = -EFAULT;
> > +               goto err_pages;
> >         }
> > -       up_read(&mm->mmap_sem);
> > -func_cont:
> > -       if (status) {
> > -               /*
> > -                * Roll out the mapped pages incase it
> failed in middle of
> > -                * mapping
> > -                */
> > -               if (pg_i) {
> > -                       bridge_brd_mem_un_map(dev_context,
> virt_addr,
> > -                                          (pg_i * PG_SIZE4K));
> > -               }
> > -               status = -EPERM;
> > +
> > +       sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
> > +       if (!sgt) {
> > +               res = -ENOMEM;
> > +               goto err_pages;
> >         }
> > -       /*
> > -        * In any case, flush the TLB
> > -        * This is called from here instead from pte_update
> to avoid unnecessary
> > -        * repetition while mapping non-contiguous physical
> regions of a virtual
> > -        * region
> > -        */
> > -       flush_all(dev_context);
> > -       dev_dbg(bridge, "%s status %x\n", __func__, status);
> > -       return status;
> > +
> > +       res = sg_alloc_table(sgt, pages, GFP_KERNEL);
> > +
> > +       if (res < 0)
> > +               goto err_sg;
> > +
> > +       for_each_sg(sgt->sgl, sg, sgt->nents, i)
> > +               sg_set_page(sg, usr_pgs[i], PAGE_SIZE, 0);
> > +
> > +       da = iommu_vmap(mmu, da, sgt, IOVMF_ENDIAN_LITTLE |
> > + IOVMF_ELSZ_32);
> > +
> > +       if (!IS_ERR_VALUE(da))
> > +               return 0;
>
> It might be a matter of taste, but you could unconditionally
> return 0 and add a goto in case of error like you're doing in
> the rest of the function. IMO it would improve readability to
> point out the code for non-error condition has ended here.

You mean?
                if (!IS_ERR_VALUE(da))
                        goto error;
                return 0;
error:

I thought that, but a goto that just skip one line of code does
Not look good to me.  Also you don't need to look deeper to realize
That is the sucessful case, also the "return 0" gives you a clue :).
Moreover I am getting rid of a goto and the lable that are not needed.


Thanks for the comments,
Fernando Guzman Lugo.

>
> Br,
>
> David
>
> > +       res = (int)da;
> > +
> > +       sg_free_table(sgt);
> > +err_sg:
> > +       kfree(sgt);
> > +       i = pages;
> > +err_pages:
> > +       while (i--)
> > +               put_page(usr_pgs[i]);
> > +       return res;
> >  }
> >
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux