> -----Original Message-----
> From: Taneja, Archit
> Sent: Monday, September 27, 2010 12:47 PM
> To: Hiremath, Vaibhav
> Cc: linux-omap@xxxxxxxxxxxxxxx; linux-media@xxxxxxxxxxxxxxx; Taneja,
> Archit
> Subject: [PATCH v2 1/2] V4L/DVB: OMAP_VOUT: Create a seperate vrfb
> functions library
>
> Create omap_vout_vrfb.c and omap_vout_vrfb.h, these contain functions
> which
> omap_vout will call if the rotation type is set to VRFB rotation. It is
> essentialy the code in omap_vout which is used for vrfb specific tasks.
>
> Apart from this, some functions and preprocessor defines needed by the new
> vrfb function's have been moved around.
>
> Signed-off-by: Archit Taneja <archit@xxxxxx>
> ---
> drivers/media/video/omap/omap_vout.c | 32 +--
> drivers/media/video/omap/omap_vout_vrfb.c | 417
> +++++++++++++++++++++++++++++
> drivers/media/video/omap/omap_vout_vrfb.h | 40 +++
> drivers/media/video/omap/omap_voutdef.h | 25 ++
> 4 files changed, 490 insertions(+), 24 deletions(-)
> create mode 100644 drivers/media/video/omap/omap_vout_vrfb.c
> create mode 100644 drivers/media/video/omap/omap_vout_vrfb.h
>
> diff --git a/drivers/media/video/omap/omap_vout.c
> b/drivers/media/video/omap/omap_vout.c
> index 4ed51b1..46bc642
> --- a/drivers/media/video/omap/omap_vout.c
> +++ b/drivers/media/video/omap/omap_vout.c
> @@ -56,7 +56,6 @@ MODULE_AUTHOR("Texas Instruments");
> MODULE_DESCRIPTION("OMAP Video for Linux Video out driver");
> MODULE_LICENSE("GPL");
>
> -
> /* Driver Configuration macros */
> #define VOUT_NAME "omap_vout"
>
> @@ -65,28 +64,13 @@ enum omap_vout_channels {
> OMAP_VIDEO2,
> };
>
> -enum dma_channel_state {
> - DMA_CHAN_NOT_ALLOTED,
> - DMA_CHAN_ALLOTED,
> -};
> -
> #define QQVGA_WIDTH 160
> #define QQVGA_HEIGHT 120
>
> -/* Max Resolution supported by the driver */
> -#define VID_MAX_WIDTH 1280 /* Largest width */
> -#define VID_MAX_HEIGHT 720 /* Largest height */
> -
[Hiremath, Vaibhav] I wanted to get rid of this sometime, but as of now we can live with this.
I would suggest to move QQVGA_xxx macros to header file to keep consistency.
> /* Mimimum requirement is 2x2 for DSS */
> #define VID_MIN_WIDTH 2
> #define VID_MIN_HEIGHT 2
>
> -/* 2048 x 2048 is max res supported by OMAP display controller */
> -#define MAX_PIXELS_PER_LINE 2048
> -
> -#define VRFB_TX_TIMEOUT 1000
> -#define VRFB_NUM_BUFS 4
> -
> /* Max buffer size tobe allocated during init */
> #define OMAP_VOUT_MAX_BUF_SIZE (VID_MAX_WIDTH*VID_MAX_HEIGHT*4)
>
> @@ -96,8 +80,8 @@ static u32 video1_numbuffers = 3;
> static u32 video2_numbuffers = 3;
> static u32 video1_bufsize = OMAP_VOUT_MAX_BUF_SIZE;
> static u32 video2_bufsize = OMAP_VOUT_MAX_BUF_SIZE;
> -static u32 vid1_static_vrfb_alloc;
> -static u32 vid2_static_vrfb_alloc;
> +u32 vid1_static_vrfb_alloc;
> +u32 vid2_static_vrfb_alloc;
[Hiremath, Vaibhav] Don't make this variable "extern"; I think these variables are being used during init time only so you can pass it as function argument.
> static int debug;
>
> /* Module parameters */
> @@ -174,7 +158,7 @@ const static struct v4l2_fmtdesc omap_formats[] = {
> /*
> * Allocate buffers
> */
> -static unsigned long omap_vout_alloc_buffer(u32 buf_size, u32 *phys_addr)
> +unsigned long omap_vout_alloc_buffer(u32 buf_size, u32 *phys_addr)
[Hiremath, Vaibhav] This function can be moved to omap_voutlib.c file since it is something generic and independent.
> {
> u32 order, size;
> unsigned long virt_addr, addr;
> @@ -198,7 +182,7 @@ static unsigned long omap_vout_alloc_buffer(u32
> buf_size, u32 *phys_addr)
> /*
> * Free buffers
> */
> -static void omap_vout_free_buffer(unsigned long virtaddr, u32 buf_size)
> +void omap_vout_free_buffer(unsigned long virtaddr, u32 buf_size)
> {
[Hiremath, Vaibhav] same here.
> u32 order, size;
> unsigned long addr = virtaddr;
> @@ -371,7 +355,7 @@ static void omap_vout_release_vrfb(struct
> omap_vout_device *vout)
> /*
> * Return true if rotation is 90 or 270
> */
> -static inline int rotate_90_or_270(const struct omap_vout_device *vout)
> +int rotate_90_or_270(const struct omap_vout_device *vout)
> {
[Hiremath, Vaibhav] You can move this to header file keeping it inline.
> return (vout->rotation == dss_rotation_90_degree ||
> vout->rotation == dss_rotation_270_degree);
> @@ -380,7 +364,7 @@ static inline int rotate_90_or_270(const struct
> omap_vout_device *vout)
> /*
> * Return true if rotation is enabled
> */
> -static inline int rotation_enabled(const struct omap_vout_device *vout)
> +int rotation_enabled(const struct omap_vout_device *vout)
[Hiremath, Vaibhav] ditto here.
> {
> return vout->rotation || vout->mirror;
> }
> @@ -388,7 +372,7 @@ static inline int rotation_enabled(const struct
> omap_vout_device *vout)
> /*
> * Reverse the rotation degree if mirroring is enabled
> */
> -static inline int calc_rotation(const struct omap_vout_device *vout)
> +int calc_rotation(const struct omap_vout_device *vout)
> {
> if (!vout->mirror)
> return vout->rotation;
> @@ -408,7 +392,7 @@ static inline int calc_rotation(const struct
> omap_vout_device *vout)
> /*
> * Free the V4L2 buffers
> */
> -static void omap_vout_free_buffers(struct omap_vout_device *vout)
> +void omap_vout_free_buffers(struct omap_vout_device *vout)
> {
> int i, numbuffers;
>
> diff --git a/drivers/media/video/omap/omap_vout_vrfb.c
> b/drivers/media/video/omap/omap_vout_vrfb.c
> new file mode 100644
> index 0000000..1e6d8a7
> --- /dev/null
> +++ b/drivers/media/video/omap/omap_vout_vrfb.c
> @@ -0,0 +1,417 @@
> +/*
> + * omap_vout_vrfb.c
> + *
> + * Copyright (C) 2010 Texas Instruments.
> + *
> + * This file is licensed under the terms of the GNU General Public
> License
> + * version 2. This program is licensed "as is" without any warranty of
> any
> + * kind, whether express or implied.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/types.h>
> +#include <linux/sched.h>
> +#include <linux/platform_device.h>
[Hiremath, Vaibhav] Do you need all of these header files?
> +#include <linux/dma-mapping.h>
> +#include <linux/videodev2.h>
> +
> +#include <media/videobuf-dma-contig.h>
> +#include <media/v4l2-device.h>
> +
> +#include <plat/dma.h>
> +#include <plat/vrfb.h>
> +#include <plat/display.h>
> +
> +#include "omap_voutdef.h"
> +
> +/*
> + * Function for allocating video buffers
> + */
> +static int omap_vout_allocate_vrfb_buffers(struct omap_vout_device *vout,
> + unsigned int *count, int startindex)
> +{
> + int i, j;
> +
> + for (i = 0; i < *count; i++) {
> + if (!vout->smsshado_virt_addr[i]) {
> + vout->smsshado_virt_addr[i] =
> + omap_vout_alloc_buffer(vout->smsshado_size,
> + &vout->smsshado_phy_addr[i]);
> + }
> + if (!vout->smsshado_virt_addr[i] && startindex != -1) {
> + if (V4L2_MEMORY_MMAP == vout->memory && i >= startindex)
> + break;
> + }
> + if (!vout->smsshado_virt_addr[i]) {
> + for (j = 0; j < i; j++) {
> + omap_vout_free_buffer(
> + vout->smsshado_virt_addr[j],
> + vout->smsshado_size);
> + vout->smsshado_virt_addr[j] = 0;
> + vout->smsshado_phy_addr[j] = 0;
> + }
> + *count = 0;
> + return -ENOMEM;
> + }
> + memset((void *) vout->smsshado_virt_addr[i], 0,
> + vout->smsshado_size);
> + }
> + return 0;
> +}
> +
> +/*
> + * Wakes up the application once the DMA transfer to VRFB space is
> completed.
> + */
> +static void omap_vout_vrfb_dma_tx_callback(int lch, u16 ch_status, void
> *data)
> +{
> + struct vid_vrfb_dma *t = (struct vid_vrfb_dma *) data;
> +
> + t->tx_status = 1;
> + wake_up_interruptible(&t->wait);
> +}
> +
> +/*
> + * Free VRFB buffers
> + */
> +void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout)
> +{
> + int j;
> +
> + for (j = 0; j < VRFB_NUM_BUFS; j++) {
> + omap_vout_free_buffer(vout->smsshado_virt_addr[j],
> + vout->smsshado_size);
> + vout->smsshado_virt_addr[j] = 0;
> + vout->smsshado_phy_addr[j] = 0;
> + }
> +}
> +
> +/* Free the VRFB buffers only if they are allocated
> + * during reqbufs. Don't free if init time allocated
> + */
> +void omap_vout_free_extra_vrfb_buffers(struct omap_vout_device *vout)
> +{
> +
> + int i = 0;
> +
> + if (!vout->vrfb_static_allocation) {
> + for (i = 0; i < VRFB_NUM_BUFS; i++) {
> + if (vout->smsshado_virt_addr[i]) {
> + omap_vout_free_buffer(
> + vout->smsshado_virt_addr[i],
> + vout->smsshado_size);
> + vout->smsshado_virt_addr[i] = 0;
> + vout->smsshado_phy_addr[i] = 0;
> + }
> + }
> + }
> +}
> +
> +int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num)
> +{
> + int ret = 0, i, j;
> + struct omap_vout_device *vout;
> + struct video_device *vfd;
> + int image_width, image_height;
> + int static_vrfb_allocation = 0, vrfb_num_bufs = VRFB_NUM_BUFS;
> + struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
> + struct omap2video_device *vid_dev =
> + container_of(v4l2_dev, struct omap2video_device, v4l2_dev);
> +
> + vout = vid_dev->vouts[vid_num];
> + vfd = vout->vfd;
> +
> + for (i = 0; i < VRFB_NUM_BUFS; i++) {
> + if (omap_vrfb_request_ctx(&vout->vrfb_context[i])) {
> + dev_info(&pdev->dev, ": VRFB allocation failed\n");
> + for (j = 0; j < i; j++)
> + omap_vrfb_release_ctx(&vout->vrfb_context[j]);
> + ret = -ENOMEM;
> + goto free_buffers;
> + }
> + }
> +
> + /* Calculate VRFB memory size */
> + /* allocate for worst case size */
> + image_width = VID_MAX_WIDTH / TILE_SIZE;
> + if (VID_MAX_WIDTH % TILE_SIZE)
> + image_width++;
> +
> + image_width = image_width * TILE_SIZE;
> + image_height = VID_MAX_HEIGHT / TILE_SIZE;
> +
> + if (VID_MAX_HEIGHT % TILE_SIZE)
> + image_height++;
> +
> + image_height = image_height * TILE_SIZE;
> + vout->smsshado_size = PAGE_ALIGN(image_width * image_height * 2 *
> 2);
> +
> + /*
> + * Request and Initialize DMA, for DMA based VRFB transfer
> + */
> + vout->vrfb_dma_tx.dev_id = OMAP_DMA_NO_DEVICE;
> + vout->vrfb_dma_tx.dma_ch = -1;
> + vout->vrfb_dma_tx.req_status = DMA_CHAN_ALLOTED;
> + ret = omap_request_dma(vout->vrfb_dma_tx.dev_id, "VRFB DMA TX",
> + omap_vout_vrfb_dma_tx_callback,
> + (void *) &vout->vrfb_dma_tx, &vout->vrfb_dma_tx.dma_ch);
> + if (ret < 0) {
> + vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
> + dev_info(&pdev->dev, ": failed to allocate DMA Channel for"
> + " video%d\n", vfd->minor);
> + }
> + init_waitqueue_head(&vout->vrfb_dma_tx.wait);
> +
> + /* Allocate VRFB buffers if selected through bootargs */
> + static_vrfb_allocation = (vid_num == 0) ?
> + vid1_static_vrfb_alloc : vid2_static_vrfb_alloc;
> +
> + /* statically allocated the VRFB buffer is done through
> + commands line aruments */
> + if (static_vrfb_allocation) {
> + if (omap_vout_allocate_vrfb_buffers(vout, &vrfb_num_bufs, -1))
> {
> + ret = -ENOMEM;
> + goto release_vrfb_ctx;
> + }
> + vout->vrfb_static_allocation = 1;
> + }
> + return 0;
> +
> +release_vrfb_ctx:
> + for (j = 0; j < VRFB_NUM_BUFS; j++)
> + omap_vrfb_release_ctx(&vout->vrfb_context[j]);
> +free_buffers:
> + omap_vout_free_buffers(vout);
> +
> + return ret;
> +}
> +
> +/*
> + * Release the VRFB context once the module exits
> + */
> +void omap_vout_release_vrfb(struct omap_vout_device *vout)
> +{
> + int i;
> +
> + for (i = 0; i < VRFB_NUM_BUFS; i++)
> + omap_vrfb_release_ctx(&vout->vrfb_context[i]);
> +
> + if (vout->vrfb_dma_tx.req_status == DMA_CHAN_ALLOTED) {
> + vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
> + omap_free_dma(vout->vrfb_dma_tx.dma_ch);
> + }
> +}
> +
> +/*
> + * Allocate the buffers for the VRFB space. Data is copied from V4L2
> + * buffers to the VRFB buffers using the DMA engine.
> + */
> +int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout,
> + unsigned int *count, unsigned int startindex)
> +{
> + int i;
> + bool yuv_mode;
> +
> + if (!rotation_enabled(vout))
> + return 0;
> +
> + /* If rotation is enabled, allocate memory for VRFB space also */
> + *count = *count > VRFB_NUM_BUFS ? VRFB_NUM_BUFS : *count;
> +
> + /* Allocate the VRFB buffers only if the buffers are not
> + * allocated during init time.
> + */
> + if (!vout->vrfb_static_allocation)
> + if (omap_vout_allocate_vrfb_buffers(vout, count, startindex))
> + return -ENOMEM;
> +
> + if (vout->dss_mode == OMAP_DSS_COLOR_YUV2 ||
> + vout->dss_mode == OMAP_DSS_COLOR_UYVY)
> + yuv_mode = true;
> + else
> + yuv_mode = false;
> +
> + for (i = 0; i < *count; i++)
> + omap_vrfb_setup(&vout->vrfb_context[i],
> + vout->smsshado_phy_addr[i], vout->pix.width,
> + vout->pix.height, vout->bpp, yuv_mode);
> +
> + return 0;
> +}
> +
> +int omap_vout_prepare_vrfb(struct omap_vout_device *vout,
> + struct videobuf_buffer *vb)
> +{
> + dma_addr_t dmabuf;
> + struct vid_vrfb_dma *tx;
> + enum dss_rotation rotation;
> + u32 dest_frame_index = 0, src_element_index = 0;
> + u32 dest_element_index = 0, src_frame_index = 0;
> + u32 elem_count = 0, frame_count = 0, pixsize = 2;
> +
> + if (!rotation_enabled(vout))
> + return 0;
> +
> + dmabuf = vout->buf_phy_addr[vb->i];
> + /* If rotation is enabled, copy input buffer into VRFB
> + * memory space using DMA. We are copying input buffer
> + * into VRFB memory space of desired angle and DSS will
> + * read image VRFB memory for 0 degree angle
> + */
> + pixsize = vout->bpp * vout->vrfb_bpp;
> + /*
> + * DMA transfer in double index mode
> + */
> +
> + /* Frame index */
> + dest_frame_index = ((MAX_PIXELS_PER_LINE * pixsize) -
> + (vout->pix.width * vout->bpp)) + 1;
> +
> + /* Source and destination parameters */
> + src_element_index = 0;
> + src_frame_index = 0;
> + dest_element_index = 1;
> + /* Number of elements per frame */
> + elem_count = vout->pix.width * vout->bpp;
> + frame_count = vout->pix.height;
> + tx = &vout->vrfb_dma_tx;
> + tx->tx_status = 0;
> + omap_set_dma_transfer_params(tx->dma_ch, OMAP_DMA_DATA_TYPE_S32,
> + (elem_count / 4), frame_count, OMAP_DMA_SYNC_ELEMENT,
> + tx->dev_id, 0x0);
> + /* src_port required only for OMAP1 */
> + omap_set_dma_src_params(tx->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
> + dmabuf, src_element_index, src_frame_index);
> + /*set dma source burst mode for VRFB */
> + omap_set_dma_src_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
> + rotation = calc_rotation(vout);
> +
> + /* dest_port required only for OMAP1 */
> + omap_set_dma_dest_params(tx->dma_ch, 0, OMAP_DMA_AMODE_DOUBLE_IDX,
> + vout->vrfb_context[vb->i].paddr[0], dest_element_index,
> + dest_frame_index);
> + /*set dma dest burst mode for VRFB */
> + omap_set_dma_dest_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
> + omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, 0x20, 0);
> +
> + omap_start_dma(tx->dma_ch);
> + interruptible_sleep_on_timeout(&tx->wait, VRFB_TX_TIMEOUT);
> +
> + if (tx->tx_status == 0) {
> + omap_stop_dma(tx->dma_ch);
> + return -EINVAL;
> + }
> + /* Store buffers physical address into an array. Addresses
> + * from this array will be used to configure DSS */
> + vout->queued_buf_addr[vb->i] = (u8 *)
> + vout->vrfb_context[vb->i].paddr[rotation];
> + return 0;
> +}
> +
> +/*
> + * Calculate the buffer offsets from which the streaming should
> + * start. This offset calculation is mainly required because of
> + * the VRFB 32 pixels alignment with rotation.
> + */
> +void omap_vout_calculate_vrfb_offset(struct omap_vout_device *vout)
> +{
> + enum dss_rotation rotation;
> + bool mirroring = vout->mirror;
> + struct v4l2_rect *crop = &vout->crop;
> + struct v4l2_pix_format *pix = &vout->pix;
> + int *cropped_offset = &vout->cropped_offset;
> + int vr_ps = 1, ps = 2, temp_ps = 2;
> + int offset = 0, ctop = 0, cleft = 0, line_length = 0;
> +
> + rotation = calc_rotation(vout);
> +
> + if (V4L2_PIX_FMT_YUYV == pix->pixelformat ||
> + V4L2_PIX_FMT_UYVY == pix->pixelformat) {
> + if (rotation_enabled(vout)) {
> + /*
> + * ps - Actual pixel size for YUYV/UYVY for
> + * VRFB/Mirroring is 4 bytes
> + * vr_ps - Virtually pixel size for YUYV/UYVY is
> + * 2 bytes
> + */
> + ps = 4;
> + vr_ps = 2;
> + } else {
> + ps = 2; /* otherwise the pixel size is 2 byte */
> + }
> + } else if (V4L2_PIX_FMT_RGB32 == pix->pixelformat) {
> + ps = 4;
> + } else if (V4L2_PIX_FMT_RGB24 == pix->pixelformat) {
> + ps = 3;
> + }
> + vout->ps = ps;
> + vout->vr_ps = vr_ps;
> +
> + if (rotation_enabled(vout)) {
> + line_length = MAX_PIXELS_PER_LINE;
> + ctop = (pix->height - crop->height) - crop->top;
> + cleft = (pix->width - crop->width) - crop->left;
> + } else {
> + line_length = pix->width;
> + }
> + vout->line_length = line_length;
> + switch (rotation) {
> + case dss_rotation_90_degree:
> + offset = vout->vrfb_context[0].yoffset *
> + vout->vrfb_context[0].bytespp;
> + temp_ps = ps / vr_ps;
> + if (mirroring == 0) {
> + *cropped_offset = offset + line_length *
> + temp_ps * cleft + crop->top * temp_ps;
> + } else {
> + *cropped_offset = offset + line_length * temp_ps *
> + cleft + crop->top * temp_ps + (line_length *
> + ((crop->width / (vr_ps)) - 1) * ps);
> + }
> + break;
> + case dss_rotation_180_degree:
> + offset = ((MAX_PIXELS_PER_LINE * vout->vrfb_context[0].yoffset
> *
> + vout->vrfb_context[0].bytespp) +
> + (vout->vrfb_context[0].xoffset *
> + vout->vrfb_context[0].bytespp));
> + if (mirroring == 0) {
> + *cropped_offset = offset + (line_length * ps * ctop) +
> + (cleft / vr_ps) * ps;
> +
> + } else {
> + *cropped_offset = offset + (line_length * ps * ctop) +
> + (cleft / vr_ps) * ps + (line_length *
> + (crop->height - 1) * ps);
> + }
> + break;
> + case dss_rotation_270_degree:
> + offset = MAX_PIXELS_PER_LINE * vout->vrfb_context[0].xoffset *
> + vout->vrfb_context[0].bytespp;
> + temp_ps = ps / vr_ps;
> + if (mirroring == 0) {
> + *cropped_offset = offset + line_length *
> + temp_ps * crop->left + ctop * ps;
> + } else {
> + *cropped_offset = offset + line_length *
> + temp_ps * crop->left + ctop * ps +
> + (line_length * ((crop->width / vr_ps) - 1) *
> + ps);
> + }
> + break;
> + case dss_rotation_0_degree:
> + if (mirroring == 0) {
> + *cropped_offset = (line_length * ps) *
> + crop->top + (crop->left / vr_ps) * ps;
> + } else {
> + *cropped_offset = (line_length * ps) *
> + crop->top + (crop->left / vr_ps) * ps +
> + (line_length * (crop->height - 1) * ps);
> + }
> + break;
> + default:
> + *cropped_offset = (line_length * ps * crop->top) /
> + vr_ps + (crop->left * ps) / vr_ps +
> + ((crop->width / vr_ps) - 1) * ps;
> + break;
> + }
> +}
> diff --git a/drivers/media/video/omap/omap_vout_vrfb.h
> b/drivers/media/video/omap/omap_vout_vrfb.h
> new file mode 100644
> index 0000000..78aef31
> --- /dev/null
> +++ b/drivers/media/video/omap/omap_vout_vrfb.h
> @@ -0,0 +1,40 @@
> +/*
> + * omap_vout_vrfb.h
> + *
> + * Copyright (C) 2010 Texas Instruments.
> + *
> + * This file is licensed under the terms of the GNU General Public
> License
> + * version 2. This program is licensed "as is" without any warranty of
> any
> + * kind, whether express or implied.
> + *
> + */
> +
> +#ifndef OMAP_VOUT_VRFB_H
> +#define OMAP_VOUT_VRFB_H
> +
> +#ifdef CONFIG_OMAP2_VRFB
[Hiremath, Vaibhav] you don't have to do this, since VRFB is automatically gets enabled when you select OMAP_VOUT.
Thanks,
Vaibhav
> +void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout);
> +void omap_vout_free_extra_vrfb_buffers(struct omap_vout_device *vout);
> +int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num);
> +void omap_vout_release_vrfb(struct omap_vout_device *vout);
> +int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout,
> + unsigned int *count, unsigned int startindex);
> +int omap_vout_prepare_vrfb(struct omap_vout_device *vout,
> + struct videobuf_buffer *vb);
> +void omap_vout_calculate_vrfb_offset(struct omap_vout_device *vout);
> +#else
> +void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout) { }
> +void omap_vout_free_extra_vrfb_buffers(struct omap_vout_device *vout) { }
> +int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num)
> + { return 0; }
> +void omap_vout_release_vrfb(struct omap_vout_device *vout) { }
> +int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout,
> + unsigned int *count, unsigned int startindex)
> + { return 0; }
> +int omap_vout_prepare_vrfb(struct omap_vout_device *vout,
> + struct videobuf_buffer *vb)
> + { return 0; }
> +void omap_vout_calculate_vrfb_offset(struct omap_vout_device *vout) { }
> +#endif
> +
> +#endif
> diff --git a/drivers/media/video/omap/omap_voutdef.h
> b/drivers/media/video/omap/omap_voutdef.h
> index ea3a047..7dae075 100644
> --- a/drivers/media/video/omap/omap_voutdef.h
> +++ b/drivers/media/video/omap/omap_voutdef.h
> @@ -27,6 +27,24 @@
> #define MAX_DISPLAYS 3
> #define MAX_MANAGERS 3
>
> +/* Max Resolution supported by the driver */
> +#define VID_MAX_WIDTH 1280 /* Largest width */
> +#define VID_MAX_HEIGHT 720 /* Largest height */
> +
> +/* 2048 x 2048 is max res supported by OMAP display controller */
> +#define MAX_PIXELS_PER_LINE 2048
> +
> +#define VRFB_TX_TIMEOUT 1000
> +#define VRFB_NUM_BUFS 4
> +
> +extern u32 vid1_static_vrfb_alloc;
> +extern u32 vid2_static_vrfb_alloc;
> +
> +enum dma_channel_state {
> + DMA_CHAN_NOT_ALLOTED,
> + DMA_CHAN_ALLOTED,
> +};
> +
> /* Enum for Rotation
> * DSS understands rotation in 0, 1, 2, 3 context
> * while V4L2 driver understands it as 0, 90, 180, 270
> @@ -144,4 +162,11 @@ struct omap_vout_device {
> int io_allowed;
>
> };
> +
> +unsigned long omap_vout_alloc_buffer(u32 buf_size, u32 *phys_addr);
> +void omap_vout_free_buffer(unsigned long virtaddr, u32 buf_size);
> +void omap_vout_free_buffers(struct omap_vout_device *vout);
> +int rotate_90_or_270(const struct omap_vout_device *vout);
> +int rotation_enabled(const struct omap_vout_device *vout);
> +int calc_rotation(const struct omap_vout_device *vout);
> #endif /* ifndef OMAP_VOUTDEF_H */
> --
> 1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
