Otherwise tidspbridge cannot work.
It looks like this was dropped in the conversion to staging. I took the
liberty of doing some cleaning up.
Signed-off-by: Felipe Contreras <felipe.contreras@xxxxxxxxx>
---
arch/arm/mach-omap2/Makefile | 4 ++
arch/arm/mach-omap2/dsp.c | 85 +++++++++++++++++++++++++++++++++
arch/arm/plat-omap/common.c | 2 +
arch/arm/plat-omap/devices.c | 30 ++++++++++++
arch/arm/plat-omap/include/plat/dsp.h | 31 ++++++++++++
5 files changed, 152 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-omap2/dsp.c
create mode 100644 arch/arm/plat-omap/include/plat/dsp.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 88d3a1e..58288a4 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -102,6 +102,10 @@ obj-y += $(iommu-m) $(iommu-y)
i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
obj-y += $(i2c-omap-m) $(i2c-omap-y)
+ifneq ($(CONFIG_TIDSPBRIDGE),)
+obj-y += dsp.o
+endif
+
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c
new file mode 100644
index 0000000..6feeeae
--- /dev/null
+++ b/arch/arm/mach-omap2/dsp.c
@@ -0,0 +1,85 @@
+/*
+ * TI's OMAP DSP platform device registration
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include "prm.h"
+#include "cm.h"
+#ifdef CONFIG_BRIDGE_DVFS
+#include <plat/omap-pm.h>
+#endif
+
+#include <plat/dsp.h>
+
+extern phys_addr_t omap_dsp_get_mempool_base(void);
+
+static struct platform_device *omap_dsp_pdev;
+
+static struct omap_dsp_platform_data omap_dsp_pdata __initdata = {
+#ifdef CONFIG_BRIDGE_DVFS
+ .dsp_set_min_opp = omap_pm_dsp_set_min_opp,
+ .dsp_get_opp = omap_pm_dsp_get_opp,
+ .cpu_set_freq = omap_pm_cpu_set_freq,
+ .cpu_get_freq = omap_pm_cpu_get_freq,
+#endif
+ .dsp_prm_read = prm_read_mod_reg,
+ .dsp_prm_write = prm_write_mod_reg,
+ .dsp_prm_rmw_bits = prm_rmw_mod_reg_bits,
+ .dsp_cm_read = cm_read_mod_reg,
+ .dsp_cm_write = cm_write_mod_reg,
+ .dsp_cm_rmw_bits = cm_rmw_mod_reg_bits,
+};
+
+static int __init omap_dsp_init(void)
+{
+ struct platform_device *pdev;
+ int err = -ENOMEM;
+ struct omap_dsp_platform_data *pdata = &omap_dsp_pdata;
+
+ pdata->phys_mempool_base = omap_dsp_get_mempool_base();
+
+ if (pdata->phys_mempool_base) {
+ pdata->phys_mempool_size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
+ pr_info("%s: %x bytes @ %x\n", __func__,
+ pdata->phys_mempool_size, pdata->phys_mempool_base);
+ }
+
+ pdev = platform_device_alloc("omap-dsp", -1);
+ if (!pdev)
+ goto err_out;
+
+ err = platform_device_add_data(pdev, pdata, sizeof(*pdata));
+ if (err)
+ goto err_out;
+
+ err = platform_device_add(pdev);
+ if (err)
+ goto err_out;
+
+ omap_dsp_pdev = pdev;
+ return 0;
+
+err_out:
+ platform_device_put(pdev);
+ return err;
+}
+module_init(omap_dsp_init);
+
+static void __exit omap_dsp_exit(void)
+{
+ platform_device_unregister(omap_dsp_pdev);
+}
+module_exit(omap_dsp_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU");
+MODULE_DESCRIPTION("TI's OMAP DSP platform device registration");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 3008e71..57205a4 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -37,6 +37,7 @@
#include <plat/fpga.h>
#include <plat/serial.h>
#include <plat/vram.h>
+#include <plat/dsp.h>
#include <plat/clock.h>
@@ -87,6 +88,7 @@ void __init omap_reserve(void)
{
omapfb_reserve_sdram_memblock();
omap_vram_reserve_sdram_memblock();
+ omap_dsp_reserve_sdram_memblock();
}
/*
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index d1920be..4c8f9b9 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -15,6 +15,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/memblock.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -272,6 +273,35 @@ static void omap_init_wdt(void)
static inline void omap_init_wdt(void) {}
#endif
+#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
+
+static phys_addr_t omap_dsp_phys_mempool_base;
+
+void __init omap_dsp_reserve_sdram_memblock(void)
+{
+ phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
+ phys_addr_t paddr;
+
+ if (!size)
+ return;
+
+ paddr = __memblock_alloc_base(size, SZ_1M, MEMBLOCK_REAL_LIMIT);
+ if (!paddr) {
+ pr_err("%s: failed to reserve %x bytes\n",
+ __func__, size);
+ return;
+ }
+
+ omap_dsp_phys_mempool_base = paddr;
+}
+
+phys_addr_t omap_dsp_get_mempool_base(void)
+{
+ return omap_dsp_phys_mempool_base;
+}
+EXPORT_SYMBOL(omap_dsp_get_mempool_base);
+#endif
+
/*
* This gets called after board-specific INIT_MACHINE, and initializes most
* on-chip peripherals accessible on this board (except for few like USB):
diff --git a/arch/arm/plat-omap/include/plat/dsp.h b/arch/arm/plat-omap/include/plat/dsp.h
new file mode 100644
index 0000000..9c604b3
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/dsp.h
@@ -0,0 +1,31 @@
+#ifndef __OMAP_DSP_H__
+#define __OMAP_DSP_H__
+
+#include <linux/types.h>
+
+struct omap_dsp_platform_data {
+ void (*dsp_set_min_opp) (u8 opp_id);
+ u8 (*dsp_get_opp) (void);
+ void (*cpu_set_freq) (unsigned long f);
+ unsigned long (*cpu_get_freq) (void);
+ unsigned long mpu_speed[6];
+
+ /* functions to write and read PRCM registers */
+ void (*dsp_prm_write)(u32, s16 , u16);
+ u32 (*dsp_prm_read)(s16 , u16);
+ u32 (*dsp_prm_rmw_bits)(u32, u32, s16, s16);
+ void (*dsp_cm_write)(u32, s16 , u16);
+ u32 (*dsp_cm_read)(s16 , u16);
+ u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16);
+
+ phys_addr_t phys_mempool_base;
+ phys_addr_t phys_mempool_size;
+};
+
+#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
+extern void omap_dsp_reserve_sdram_memblock(void);
+#else
+static inline void omap_dsp_reserve_sdram_memblock(void) { }
+#endif
+
+#endif
--
1.7.3.1.2.g7fe2b
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
