On 09/16/10 19:53, Tony Lindgren wrote: > * Igor Grinberg <grinberg@xxxxxxxxxxxxxx> [100916 01:46]: >> Add basic suppot, enable uart and led. >> >> Signed-off-by: Igor Grinberg <grinberg@xxxxxxxxxxxxxx> >> --- >> arch/arm/mach-omap2/Kconfig | 7 ++ >> arch/arm/mach-omap2/Makefile | 1 + >> arch/arm/mach-omap2/board-cm-t3517.c | 109 ++++++++++++++++++++++++++++++++++ >> 3 files changed, 117 insertions(+), 0 deletions(-) >> create mode 100644 arch/arm/mach-omap2/board-cm-t3517.c > Looks like you're missing the debug uart entry for > arch/arm/plat-omap/include/plat/uncompress.h? > > You can test this by enabling DEBUG_LL and EARLY_PRINTK > in your .config, then pass earlyprintk in the kernel > cmdline. Might become handy for debugging the early > init process for your board. Indeed can be useful. Thanks. > Regards, > > Tony > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- Regards, Igor. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html