Hi,
While trying to boot kernel image on N800 I am seeing
lot of garbled characters along with the trace in gtkterm.
I have configured the terminal as follows:
Port: ttyS0
Speed: 115200
Parity: none
Bits:8
Stopbits: 1
Flow control: none
End of delay(ms): 0
Can someone help me if I am missing anything in my configuration?
-tarun
[LOG SNIPPET]
<<Garbled characters>>
...
DeteNOLO X-Loader (v1.1.16, Oct 31 2008)
Secondary image size 99036
Booting secondary
Nokia OMAP Loader v1.1.16 (Oct 31 2008) running on Nokia N800 F5 (RX-34)
Clocks:
Core: 658 MHz L3: 109 MHz L4: 109 MHz
MPU: 329 MHz DSP: 219 MHz IVA: 109 MHz
I2C v3.4
Menelaus v2.2 found
Vilma v1.5 found
Betty v2.1 found
Reset reason: pwr_key
System DMA v2.0
OneNAND blocks unlocked in 30264 us
Flash id: ec4811
Partition table successfully read
McSPI v1.4
RFBI version 1.0
Detecting LCD panel lph8923
Panel ID: 838f48
URAL panel detected
Detected LCD paneH: lc041q3
S1D1374! HaAlstOrm @eteCted
FB memory blanking took 242 ms (3089 kB/s)
Logo drawn in 24 ms (1218 kB/s)
Über-cool backlight fade-in took 101 ms
Initializing USB
USB host detected
Entering USB loop
SETUP: RD STD DEVICE GET_DESCRIPTOR DEVICE (value 00, index 0000, length 64 bytes)
SETUP: WR STD DEVICE SET_ADDRESS value 0033 index 0000 length 0000
SETUP: RD STD DEVICE GET_DESCRIPTOR DEVICE (value 00, index 0000, length 18 bytes)
SETUP: RD STD DEVICE GET_DESCRIPTOR CONFIGURATION (value 00, index 0000, length 9 bytes)
SETUP: RD STD DEVICE GET_DESCRIPTOR CONFIGURATION (value 00, index 0000, length 94 bytes)
...
<<Garbled characters>>
...
Loading kernel image info... done.
Loading kernel (1427 kB)... done in 73 ms (19527 kB/s)
Total bootup time 2734 ms
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Linux version 2.6.36-rc4-00040-g4c1f85c-dirty (x0016154@omaplbp) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #7 Fri Sep 17 15:57:29 IST 2010
[ 0.000000] CPU: ARMv6-compatible processor [4107b362] revision 2 (ARMv6TEJ), cr=00c5387f
[ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Nokia N800
[ 0.000000] Ignoring unrecognised tag 0x414f4d50
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
....
<<Garbled characters>>
....
[ 0.000000] pid_max: default: 32768 minimum: 301
[ 0.000000] Mount-cache hash table entries: 512
[ 0.000000] CPU: Testing write buffer coherency: ok
[ 0.000000] regulator: core version 0.5
...
<<Garbled characters>>
...
[ 1.204437] mmc0: new SD card at address 1234
[ 1.210021] mmcblk0: mmc0:1234 SA01G 972 MiB
[ 1.217468] mmcblk0: p1
[ 1.241241] VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2)
[ 1.248352] Please append a correct "root=" boot option; here are the availAble partitions:
<<Garbled characters>>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
