Hi Madhu,
On Thu, Sep 16, 2010 at 05:28:11AM +0530, Madhusudhan Chikkature wrote:
> OMAP4: HSMMC cmd line reset change
Please don't repeat the subject line like this -- "git am" will put it
into the patch twice. You can either leave the subject line out of the
body of the mail altogether, or put "Subject: " in front of it.
> The cmd line reset logic is changed in OMAP4 ES2. The new procedure
> is to monitor a 0->1 transition and then 1->0 transition.The earlier
> logic would fail on ES2 chips because the loop could exit even before
> the reset is actually complete.
>
> Signed-off-by: Madhusudhan Chikkature <madhu.cr@xxxxxx>
> ---
> drivers/mmc/host/omap_hsmmc.c | 7 +++++++
> 1 files changed, 7 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> index 4526d27..750ba7d 100644
> --- a/drivers/mmc/host/omap_hsmmc.c
> +++ b/drivers/mmc/host/omap_hsmmc.c
> @@ -976,12 +976,19 @@ static inline void omap_hsmmc_reset_controller_fsm(struct
> omap_hsmmc_host *host,
(This was line-wrapped, I fixed it.)
> unsigned long bit)
> {
> unsigned long i = 0;
> + unsigned long j = 0;
> unsigned long limit = (loops_per_jiffy *
> msecs_to_jiffies(MMC_TIMEOUT_MS));
>
> OMAP_HSMMC_WRITE(host->base, SYSCTL,
> OMAP_HSMMC_READ(host->base, SYSCTL) | bit);
>
> + if (cpu_is_omap44xx() && bit == SRC) {
> + while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
> + && (j++ < limit))
> + cpu_relax();
> + }
> +
> while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) &&
> (i++ < limit))
> cpu_relax();
> --
> 1.7.0.4
Thanks, pushed to mmc-next.
--
Chris Ball <cjb@xxxxxxxxxx> <http://printf.net/>
One Laptop Per Child
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
