On Thu, Sep 16, 2010 at 06:23:32AM -0400, Keerthy wrote: > Makefile amd Kconfig Changes for twl4030-madc driver inclusion. > > Signed-off-by: Keerthy <j-keerthy@xxxxxx> > --- > arch/arm/mach-omap2/Kconfig | 4 ++++ > drivers/hwmon/Kconfig | 4 ++++ > drivers/hwmon/Makefile | 1 + > 3 files changed, 9 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index b48bacf..139137b 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -170,6 +170,8 @@ config MACH_OMAP_3430SDP > depends on ARCH_OMAP3 > default y > select OMAP_PACKAGE_CBB > + select HWMON > + select TWL4030_MADC > > config MACH_NOKIA_N800 > bool > @@ -206,6 +208,8 @@ config MACH_OMAP_ZOOM3 > depends on ARCH_OMAP3 > default y > select OMAP_PACKAGE_CBP > + select HWMON > + select TWL4030_MADC > > config MACH_CM_T35 > bool "CompuLab CM-T35 module" > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig While it may make sense to have the above changes in a separate patch, the two files below should be part of patch #1, since they are logically part of the driver, and the driver itself won't make any sense in the code without being enabled in Kconfig/Makefile. > index 4d4d09b..47d66b9 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -39,6 +39,10 @@ config HWMON_DEBUG_CHIP > > comment "Native drivers" > > +config TWL4030_MADC Please use SENSORS_TWL4030_MADC or SENSORS_TWL4030 to be in line with all other definitions. Also, please retain alphabetical order. > + tristate > + depends on HWMON && TWL4030_CORE > + HWMON is really redundant here and should be removed. > config SENSORS_ABITUGURU > tristate "Abit uGuru (rev 1 & 2)" > depends on X86 && EXPERIMENTAL > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > index e3c2484..24b3b17 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -16,6 +16,7 @@ obj-$(CONFIG_SENSORS_W83792D) += w83792d.o > obj-$(CONFIG_SENSORS_W83793) += w83793.o > obj-$(CONFIG_SENSORS_W83781D) += w83781d.o > obj-$(CONFIG_SENSORS_W83791D) += w83791d.o > +obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o > Again, please retain alphabetical order. There is a reason for the other sensors to be out of order (see comments in the Makefile), but presumably that does not apply this one. If it does, please add comment/reason indicating that/if this is the case. > obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o > obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o > -- > 1.7.0.4 > > > _______________________________________________ > lm-sensors mailing list > lm-sensors@xxxxxxxxxxxxxx > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
