[snip] > >> > > >> > [Ghorai] I have tested MMC/SD boot using omap3_defconfig on ZOOM3, > 4430 > >> ES2.0 SDP, Blaze and Panda and all booting fine. > >> > > >> > And omap_4430sdp_defconfig also ok omap4. > >> > >> Which Panda version are you using during your tests? I tried > >> omap_4430sdp_defconfig using omap4-for-tony branch at my ES2.0 and I'm > >> unable to detect the MMC. > >> > >> Do I need any other patch to make the MMC work with Panda? > > [Ghorai] I have tested based on following tree/branch and using ES2.0 > PANDA only. Can you share bootlog enabling mmc/sd debug message? > > http://dev.omapzoom.org/?p=santosh/kernel-omap4- > base.git;a=shortlog;h=refs/heads/omap4-for-tony > > My boot log: > http://paste.ubuntu.com/491645/ > [Ghorai] can you use this bootargs? setenv bootargs root=/dev/mmcblk0p2 rw rootwait mem=463M console=ttyS2,115200n8 And here is the log from my setup. [ 2.493194] Waiting for root device /dev/mmcblk0p2... [ 2.502960] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.523895] mmc0: new high speed SDHC card at address e1ed [ 2.531616] mmcblk0: mmc0:e1ed SD04G 3.75 GiB [ 2.539550] mmcblk0: p1 p2 [ 2.607360] EXT3-fs: barriers not enabled > Using x-loader from > http://gitorious.org/pandaboard/x-loader/commits/omap4_panda_L24.9 and > upstream u-boot. [Ghorai] can you try with this x-loader https://docs.google.com/leaf?id=0B8fdjBBEQ4lDZGE3ZTBjNzEtOTQ0Ni00ZmFlLTlhODgtN2QzNjUwMzBkNDI2&hl=en In the mean time I will try with yours! > > Cheers, > -- > Ricardo Salveti de Araujo -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
