On 9/8/2010 8:47 PM, Michael Williamson wrote: > Hi Cyril, > > On 09/08/2010 05:59 PM, Cyril Chemparathy wrote: >> Hi Mike, >> > > So I went in and set the debug_level to netif_msg_init() to -1 in the davinci_emac > driver. The only thing I get during the boot process is: > > net eth0: DaVinci EMAC Probe found device (regs: 01e23000, irq: 33) > > which is good (I also added some debug to make sure probe actually completes), but > I don't see *anything* else. I guess I would have expected to see something out of > the emac_dev_open. So I added some more debug in there, it's hanging in the > phy_connect() call. The phy_id it came up with was correct "0:03". > > The hang is in wait_for_user_access() in the davinci_mdio_read() call. Looks like the state machine got put back into IDLE somewhere between the MDIO probe and the EMAC probe. Seems like there should be some sort of time-out and error message in the wait_for_user_access() method.... (maybe even a check for IDLE??) If I add a patch to check the state machine for IDLE and then re-enable it in the davinci_mdio_read() call, it is able to press on and come up. I don't see any calls to the davinci_mdio_suspend() call, so I am wondering if the EMAC probe routine, particularly the application of the SOFTRESET, is causing the MDIO to drop back to IDLE / disabled. I can post the patch if you like, but it is a bit of a hack... -Mike -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
