2010/9/5 Felipe Balbi <me@xxxxxxxxxxxxxxx>: > Hi, > > On Sun, 5 Sep 2010 14:42:51 +0800, Ming Lei <tom.leiming@xxxxxxxxx> wrote: >> issue #1:(musb device not work with cable connected with PC) >> -twl->asleep is set as zero in .probe since bootloader has not >> powerdown phy >> -EVENT_VBUS returned from twl4030_usb_linkstat since usb cable >> is connected with PC >> -twl4030_phy_resume is called but does nothing since >> twl->asleep is zero >> -the following are not called to initialize otg phy: >> twl4030_phy_power / twl4030_i2c_access / >> twl4030_usb_set_mode >> -so musb device mode does not work > > ok, I see. So what you could do is enable regulators on probe > based on PHYPWR bit. This patch will enable regulators on probe based on current link state returned from twl4030_usb_linkstat instead of PHYPWR bit. If vbus or ID event detected, call __twl4030_phy_resume to enable regulators/ phy power/set mode to make phy into work state, or else call __twl4030_phy_power(0) to power down otg phy. See twl4030_usb_phy_init introduced in the patch. >> No, .asleep flag is set according to the current link state, >> instead of the initial state of transceiver. I don't think the patch >> will cause break anything. If you think it will, please describe the >> break in detail. > > if we revert that patch, you'll see that usb3v1 ldos are left on You commit before does fix one problem, which may keep phy in power on even no cable connected, so I do not request a simple revert, :-). > if we never plug/unplug usb cable. AFAIR, the reset state of those > LDOs is ON, so that's why we need that patch. >From Table 5-373 of TPS65950 manual[1], usb3v1 ldo is in sleep state after reset. But it is put into active state in twl4030_usb_ldo_init now, seems activating it too early. I have verified it OK on beagle board to remove the early activating of usb3v1 in twl4030_usb_ldo_init. I'll merge it into the v2 of the patch and post it for your review. > > I'll try to work on it monday judging I'll have laptop and HW > available by then. Very good, thanks your work! [1], TPS65950 Technical Reference Manual, http://www.ti.com/litv/pdf/swcu050e thanks, -- Lei Ming -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
