On Tue, Aug 24, 2010 at 11:53:40PM -0400, Jacob Tanenbaum wrote:
> +static inline void __init board_smsc911x_init(void)
> +{
> + /* OMAP3530 LV SOM board */
> + if (machine_is_omap3530_lv_som()) {
> + board_smsc911x_data.gpio_irq =
> + OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ;
> + /* board_smsc911x_data.gpio_reset
> + driven by SYS_nRESWARM, no GPIO */
> + /* omap_cfg_reg(AE1_34XX_GPIO152_UP); */
> + omap_mux_init_signal("gpio_152", OMAP_PIN_INPUT);
> +
> +/* omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);*/
> +
> + /* OMAP3 Torpedo board */
missing tab? Maybe it would make sense to put this after the line below?
> + } else if (machine_is_omap3_torpedo()) {
> + board_smsc911x_data.gpio_irq = OMAP3_TORPEDO_SMSC911X_GPIO_IRQ;
> + /* board_smsc911x_data.gpio_reset driven
> + by SYS_nRESWARM, no GPIO */
> + /*omap_cfg_reg(AE1_34XX_GPIO152_UP);*/
> + omap_mux_init_signal("gpio_129", OMAP_PIN_INPUT);
> + /* TODO/FIXME (comment by Peter Barada, LogicPD):
> + * On Torpedo, LAN9221 IRQ is an MMC1_DATA7 pin
> + * and IRQ1760 IRQ is MMC1_DATA4 pin - need
> + * to update PBIAS to get voltage to the device
> + * so the IRQs works correctly rather than float
> + * and cause an IRQ storm...
> + */
> + omap3torpedo_fix_pbias_voltage();
> + /* unsupported board */
missing tab? or maybe it should be moved after the line below.
> + } else {
> + printk(KERN_ERR "%s(): unknown machine type\n", __func__);
> + return;
> + }
> + gpmc_smsc911x_init(&board_smsc911x_data);
> +}
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
