Re: [PATCH 3/3] OMAP: hwmod: Force a softreset during _setup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 8/19/2010 1:57 PM, Basak, Partha wrote:
-----Original Message-----
From: Cousson, Benoit
Sent: Wednesday, August 18, 2010 8:31 PM
To: Basak, Partha
Cc: Nayak, Rajendra; Shilimkar, Santosh; linux-omap@xxxxxxxxxxxxxxx;
khilman@xxxxxxxxxxxxxxxxxxx; paul@xxxxxxxxx
Subject: Re: [PATCH 3/3] OMAP: hwmod: Force a softreset during _setup

Hi Partha,

On 8/17/2010 2:46 PM, Basak, Partha wrote:

From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap-
owner@xxxxxxxxxxxxxxx] On Behalf Of Cousson, Benoit
Sent: Thursday, August 05, 2010 3:43 AM

Force the softreset of every IPs during the _setup phase.
IPs that cannot support softreset or that should not
be reset must set the HWMOD_INIT_NO_RESET flag in the
hwmod struct.

Signed-off-by: Benoit Cousson<b-cousson@xxxxxx>
Cc: Paul Walmsley<paul@xxxxxxxxx>
Cc: Kevin Hilman<khilman@xxxxxxxxxxxxxxxxxxx>
---
   arch/arm/mach-omap2/omap_hwmod.c |   17 ++++++++---------
   1 files changed, 8 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-
omap2/omap_hwmod.c
index 53b08e3..91ad9c6 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -856,8 +856,8 @@ static int _reset(struct omap_hwmod *oh)

   	/* clocks must be on for this operation */
   	if (oh->_state != _HWMOD_STATE_ENABLED) {
-		WARN(1, "omap_hwmod: %s: reset can only be entered from "
-		     "enabled state\n", oh->name);
+		pr_warning("omap_hwmod: %s: reset can only be entered from "
+			   "enabled state\n", oh->name);
   		return -EINVAL;
   	}

@@ -874,8 +874,8 @@ static int _reset(struct omap_hwmod *oh)
   			  MAX_MODULE_RESET_WAIT, c);

   	if (c == MAX_MODULE_RESET_WAIT)
-		WARN(1, "omap_hwmod: %s: failed to reset in %d usec\n",
-		     oh->name, MAX_MODULE_RESET_WAIT);
+		pr_warning("omap_hwmod: %s: failed to reset in %d usec\n",
+			   oh->name, MAX_MODULE_RESET_WAIT);

http://focus.ti.com/pdfs/wtbu/SWPU177B_FinalEPDF_12_04_2009.pdf

This is leading to the above warning for DSS on OMAP3430/3630. Referring
to the reference manual (7.5.1 Display Subsystem Reset), successful reset
of DSS would need PRCM.CM_FCLKEN_DSS[2] EN_TV bit set to 1. For DSS, even
though TV clock is an optional clock, this is mandatory for successful DSS
reset. We could ignore this warning, or possibly WA it.
One way could be:

1. In the database, have HWMOD_INIT_NO_RESET flag set so that _setup()
skips reset.

2. After omap device build of DSS is done, lookup the opt-clock and
enable it (using clock framework).


4. Then do DSS reset again calling omap_device_reset().

All IPs that potentially have any special soft-reset sequence will need
customized handling. Should we keep the framework light and handle such
special cases in the drivers? In that case, the framework need not throw
up a warning. Please comment.

If the softreset is not mandatory for an IP like DSS, you just have to
set this HWMOD_INIT_NO_RESET flag.
There is no need to use the softreset for every IP, the PRCM already
resets every IPs each time the power domain is powered on.
softreset is useful if you need to recover from an HW error.


I agree, however without doing soft-reset, we have observed DSI malfunction. Senthil can provide more details. As DSS needs TV_clk for successful reset, I doubt whether PRCM can reset DSS once we merely turn on the DSS power domain.

After a check with Jean, The DSS will propagate the reset to sub-IPs and only the one that are properly clocked will complete the reset. So the DSS reset status cannot transition until all sub-IPs have completed the reset. The issue should not exist on OMAP4 because the sys_clk is available for all DSS sub-IPs.

So, it really depends on the IP in question. If it is necessary, we will do a omap_device_reset()in the driver. Correct?

We should avoid that. We can either allow a custom hooks to allow IPs with specifics reset / sysconfig management to change the default behavior. Or we can find a generic way to handle all these specifics cases.

I know that Paul have some ideas on that.

Regards,
Benoit

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux