From: thara gopinath <thara@xxxxxx> This patch series adds support for OMAP4 support in the smartreflex and voltage layer. The series involves extensions to voltage layer and smartreflex layer for supporting OMAP4. In addition it involves changes to pm debugfs layer to support OMAP4 so that smartreflex and voltage debug entries can be viewed, changes in opp layer so that opp layer gets enabled for OMAP4, some changes in OMAP4 clock database and finally addition of OMAP4 opp tables. All these patches might not be dependent on voltage and smartreflex layer but is required for the correct functionality of these layers for OMAP4. This series in based off origin/pm-opp branch off Kevin Hilman's PM tree which is effectively 2.6.35 with basic opp support added. But for this series to compile and work properly one will have to apply the following additional patches in the below mentioned order before applying this series. https://patchwork.kernel.org/patch/119544/ https://patchwork.kernel.org/patch/117347/ https://patchwork.kernel.org/patch/117348/ https://patchwork.kernel.org/patch/117349/ http://marc.info/?l=linux-omap&m=128162263809748&w=2 https://patchwork.kernel.org/patch/119854/ all 5 patches from origin/pm-cpufreq branch off Kevin's pm tree http://marc.info/?l=linux-omap&m=128170725127719&w=2 - all eight patches in this series This patch series has been tested on OMAP4430 SDP with omap3_defconfig with the following menuconfig options enabled System type -> TI OMAP Implementations -> Smartreflex Support System type -> TI OMAP Implementations -> Class 3 mode of Smartreflex Implementation Benoit Cousson (1): OMAP4: hwmod: Add inital data for smartreflex modules. Thara Gopinath (9): OMAP4: PM debugfs support OMAP4: OPP framework support OMAP4: Add the new voltage to vsel calculation formula OMAP4: Extend clock data. OMAP4: Adding voltage driver support OMAP4: Adding dev atrributes to OMAP4 smartreflex hwmod data OMAP4: Smartreflex framework extensions OMAP4: Enabling smartrefles class 3 driver. OMAP4: Add opp tables. arch/arm/mach-omap2/Makefile | 2 +- arch/arm/mach-omap2/board-4430sdp.c | 2 + arch/arm/mach-omap2/clock44xx_data.c | 40 ++++- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 220 +++++++++++++++++++++++++ arch/arm/mach-omap2/opp44xx.h | 26 +++ arch/arm/mach-omap2/opp44xx_data.c | 80 +++++++++ arch/arm/mach-omap2/pm-debug.c | 53 +++++- arch/arm/mach-omap2/pm.c | 6 +- arch/arm/mach-omap2/smartreflex.c | 7 +- arch/arm/mach-omap2/sr_device.c | 21 ++- arch/arm/mach-omap2/voltage.c | 246 +++++++++++++++++++++++++++- arch/arm/plat-omap/Kconfig | 2 +- arch/arm/plat-omap/Makefile | 1 + arch/arm/plat-omap/include/plat/control.h | 12 ++ arch/arm/plat-omap/include/plat/voltage.h | 20 ++- arch/arm/plat-omap/opp_twl_tps.c | 8 + 16 files changed, 721 insertions(+), 25 deletions(-) create mode 100644 arch/arm/mach-omap2/opp44xx.h create mode 100644 arch/arm/mach-omap2/opp44xx_data.c -- 1.7.1.GIT -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
