Hi, >-----Original Message----- >From: Sergei Shtylyov [mailto:sshtylyov@xxxxxxxxxx] >Sent: Wednesday, August 11, 2010 5:05 PM >To: Kalliguddi, Hema >Cc: linux-usb@xxxxxxxxxxxxxxx; linux-omap@xxxxxxxxxxxxxxx; >Basak, Partha; Felipe Balbi; Tony Lindgren; Kevin Hilman >Subject: Re: [PATCH 8/8 ]usb : musb:Using runtime pm apis for musb. > >Hello. > >I wrote: > >>> Calling runtime pm APIs pm_runtime_put_sync() and >>> pm_runtime_get_sync() for enabling/disabling the clocks,sysconfig >>> settings. > >>> used omap_hwmod_enable_wakeup & omap_hwmod_disable_wakeup apis to >>> set/clear >>> the wakeup enable bit. >>> Also need to put the USB in force standby and force idle >mode when usb >>> not used >>> and set it back to smart idle and smart stndby after wakeup. >>> these cases are handled using the oh flags. >>> For omap3430 auto idle bit has to be disabled because of >the errata.So >>> using HWMOD_NO_OCP_AUTOIDLE flag for OMAP3430. > >>> Signed-off-by: Hema HK <hemahk@xxxxxx> >>> Signed-off-by: Basak, Partha <p-basak2@xxxxxx> > >>> Cc: Felipe Balbi <felipe.balbi@xxxxxxxxx> >>> Cc: Tony Lindgren <tony@xxxxxxxxxxx> >>> Cc: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> > >[...] > >>> Index: linux-omap-pm/include/linux/usb/musb.h >>> =================================================================== >>> --- linux-omap-pm.orig/include/linux/usb/musb.h 2010-08-06 >>> 10:44:06.000000000 -0400 >>> +++ linux-omap-pm/include/linux/usb/musb.h 2010-08-06 >>> 10:44:42.946115274 -0400 >>> @@ -10,6 +10,9 @@ >>> #ifndef __LINUX_USB_MUSB_H >>> #define __LINUX_USB_MUSB_H >>> >>> +#include <linux/platform_device.h> > >> You could just use incomplete declaration of 'struct >platfrom_device' >> instead of this #include. > >>> +#include <plat/omap_hwmod.h> > > Did you think about the other platfroms where this file >doesn't exist? How >are they supposed to compile?! > I think this #include needs to be wrapped in #ifdef as well... Good point. I did not think of it. It need not be wrapped. Instead I am changing the Enable_wakeup/disable_wakeup parameter to platform_device instead of omap_device. So that I can avoid these includes. > >>> + >>> /* The USB role is defined by the connector used on the board, so >>> long as >>> * standards are being followed. (Developer boards >sometimes won't.) >>> */ >>> @@ -129,6 +132,21 @@ >>> >>> /* check usb device active state*/ >>> int (*is_usb_active)(struct device *dev); >>> + >>> + /* omap hwmod data structure */ >>> + struct omap_hwmod *oh; > >> This should be wrapped into #ifdef, don't you think? > >>> + /* enable clocks and set sysconfig register*/ >>> + int (*device_enable)(struct platform_device *pdev); >>> + >>> + /* Disable clock and reset the sysconfig register settings*/ >>> + int (*device_idle)(struct platform_device *pdev); >>> + >>> + /* set the enable wakeup bit of sysconfig register */ >>> + int (*enable_wakeup)(struct omap_device *od); >>> + >>> + /* Clear the enable wakeup bit of sysconfig register */ >>> + int (*disable_wakeup)(struct omap_device *od); > >> This should be wrapped too, I think... It will be taken care. > >WBR, Sergei > >-- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
