From: stanley.miao <stanley.miao@xxxxxxxxxxxxx>
cpu_is_omap3517() and cpu_is_omap3505() are the subgroups of cpu_is_omap34xx(),
so we should check cpu_is_omap3517() and cpu_is_omap3505() first, then check
cpu_is_omap34xx().
Otherwise, All AM35XX (Sitara) clocks do not get registered and device drivers
(ti_hecc, etc...) that depend on those clocks are failing to get the clock and
end up with non working device.
Signed-off-by: Stanley.Miao <stanley.miao@xxxxxxxxxxxxx>
Tested-by: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/mach-omap2/clock3xxx_data.c | 14 +++++++-------
1 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 138646d..dfdce2d 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3417,7 +3417,13 @@ int __init omap3xxx_clk_init(void)
struct omap_clk *c;
u32 cpu_clkflg = CK_3XXX;
- if (cpu_is_omap34xx()) {
+ if (cpu_is_omap3517()) {
+ cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
+ cpu_clkflg |= CK_3517;
+ } else if (cpu_is_omap3505()) {
+ cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
+ cpu_clkflg |= CK_3505;
+ } else if (cpu_is_omap34xx()) {
cpu_mask = RATE_IN_3XXX;
cpu_clkflg |= CK_343X;
@@ -3432,12 +3438,6 @@ int __init omap3xxx_clk_init(void)
cpu_mask |= RATE_IN_3430ES2PLUS;
cpu_clkflg |= CK_3430ES2;
}
- } else if (cpu_is_omap3517()) {
- cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
- cpu_clkflg |= CK_3517;
- } else if (cpu_is_omap3505()) {
- cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
- cpu_clkflg |= CK_3505;
}
if (omap3_has_192mhz_clk())
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
