This patch adds support for low level debugging on TI816X boards. Currently the
support for UART3 console on TI816X EVM is added.
Signed-off-by: Hemant Pedanekar <hemantp@xxxxxx>
---
arch/arm/mach-omap2/include/mach/debug-macro.S | 12 ++++++++++++
arch/arm/plat-omap/include/plat/serial.h | 3 +++
arch/arm/plat-omap/include/plat/uncompress.h | 7 +++++++
3 files changed, 22 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 09331bb..992411f 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -66,6 +66,12 @@ omap_uart_lsr: .word 0
beq 34f @ configure OMAP3UART4
cmp \rx, #OMAP4UART4 @ only on 44xx
beq 44f @ configure OMAP4UART4
+ cmp \rx, #TI816XUART1 @ ti816x UART offsets different
+ beq 81f @ configure UART1
+ cmp \rx, #TI816XUART2 @ ti816x UART offsets different
+ beq 82f @ configure UART2
+ cmp \rx, #TI816XUART3 @ ti816x UART offsets different
+ beq 83f @ configure UART3
cmp \rx, #ZOOM_UART @ only on zoom2/3
beq 95f @ configure ZOOM_UART
@@ -88,6 +94,12 @@ omap_uart_lsr: .word 0
b 98f
44: mov \rx, #UART_OFFSET(OMAP4_UART4_BASE)
b 98f
+81: mov \rx, #UART_OFFSET(TI816X_UART1_BASE)
+ b 98f
+82: mov \rx, #UART_OFFSET(TI816X_UART2_BASE)
+ b 98f
+83: mov \rx, #UART_OFFSET(TI816X_UART3_BASE)
+ b 98f
95: ldr \rx, =ZOOM_UART_BASE
mrc p15, 0, \tmp, c1, c0
tst \tmp, #1 @ MMU enabled?
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index ad8d0d8..ef8a57a 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -86,6 +86,9 @@
#define OMAP4UART2 OMAP2UART2
#define OMAP4UART3 43
#define OMAP4UART4 44
+#define TI816XUART1 81
+#define TI816XUART2 82
+#define TI816XUART3 83
#define ZOOM_UART 95 /* Only on zoom2/3 */
/* This is only used by 8250.c for omap1510 */
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index ddf723b..48a0d8c 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -93,6 +93,10 @@ static inline void flush(void)
#define DEBUG_LL_ZOOM(mach) \
_DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
+#define DEBUG_LL_TI816X(p, mach) \
+ _DEBUG_LL_ENTRY(mach, TI816X_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ TI816XUART##p)
+
static inline void __arch_decomp_setup(unsigned long arch_id)
{
int port = 0;
@@ -158,6 +162,9 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
DEBUG_LL_ZOOM(omap_zoom2);
DEBUG_LL_ZOOM(omap_zoom3);
+ /* TI8168 base boards using UART3 */
+ DEBUG_LL_TI816X(3, ti8168evm);
+
} while (0);
}
--
1.6.2.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
