> -----Original Message----- > From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap- > owner@xxxxxxxxxxxxxxx] On Behalf Of Robert Nelson > Sent: Tuesday, August 10, 2010 8:10 PM > To: tony@xxxxxxxxxxx > Cc: linux-omap@xxxxxxxxxxxxxxx; Robert Nelson > Subject: [PATCH] ARM: OMAP: Beagle: support MMC gpio_wp differences on xM > > The omap3630 based BeagleBoard xM uses a MicroSD card slot with > no write protection. > > Signed-off-by: Robert Nelson <robertcnelson@xxxxxxxxx> > --- > arch/arm/mach-omap2/board-omap3beagle.c | 4 +++- > 1 files changed, 3 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach- > omap2/board-omap3beagle.c > index 87969c7..15929be 100644 > --- a/arch/arm/mach-omap2/board-omap3beagle.c > +++ b/arch/arm/mach-omap2/board-omap3beagle.c > @@ -185,7 +185,9 @@ static struct gpio_led gpio_leds[]; > static int beagle_twl_gpio_setup(struct device *dev, > unsigned gpio, unsigned ngpio) > { > - if (system_rev >= 0x20 && system_rev <= 0x34301000) { > + if (cpu_is_omap3630()) { > + mmc[0].gpio_wp = -EINVAL; > + } else if (system_rev >= 0x20 && system_rev <= 0x34301000) { [Ghorai] it's an old code. But I think we can replace the hardcode value to use omap_rev() as you are changing the same! Or default for all omap34xx? > omap_mux_init_gpio(23, OMAP_PIN_INPUT); > mmc[0].gpio_wp = 23; > } else { > -- > 1.7.0.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
