Re: [PATCH 4/5] [omap1] Bluetooth device code common to HTC smartphones

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Cory Maccarrone <darkstar6262@xxxxxxxxx> [100808 20:22]:
> On Wed, Aug 4, 2010 at 3:15 AM, Tony Lindgren <tony@xxxxxxxxxxx> wrote:
> > * Cory Maccarrone <darkstar6262@xxxxxxxxx> [100802 18:23]:
> >> This change adds in a bluetooth controld driver/rfkill
> >> interface to the serial bluetooth controller found on many
> >> HTC smartphones such as the HTC Herald and HTC Wizard.
> >
> > To me it looks like most of this should be in drivers/bluetooth/omap7xx.c
> > or something like that. Then you can just pass it the gpio numbers in
> > the platform_data.
> >
> 
> Not sure I agree that it fits there.  The driver isn't really a
> bluetooth driver -- it's really just an RFKILL interface, and some
> code to toggle UART clocks on and off, plus GPIO work on a
> board-specific level.  In principle, the gpios could be set and the
> clocks enabled in the board files, and this driver wouldn't be
> necessary to get working bluetooth (as we'd use hciattach on
> /dev/ttyS*).  But then, we can't toggle it off for power saving.
> Maybe a better place would be plat-omap/?  But it really is more
> specific to these HTC boards, not the architecture itself.

Hmm well what we've used earlier is to set something like set_power
function pointer in the platform data, then call that in the driver
if set. But in this case the driver is 8250.c, so let's not mess
with that..

This issue should get properly solved with the omap specific serial
driver once we get that merged as then we can have hooks for set_power
in addition to cutting serial clocks when idle.

> So really, the only point of this driver is to be able to power on and
> off the external bluetooth chip, which is why I submitted it as helper
> code to the board files.

Yeah. Can you take a look at the omap specific serial driver to get
it working on omap1?

Then you can have your GPIO functions set in the board-*.c file
as set_power or similar, and the UART driver can idle properly.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux